Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
SPECIFICATION / HANDLING
Color : Odour Pink/ red (Colour changes of the product cannot be excluded the effects will however not impaired.)
Sp. Gravity : 1.1 to 1.25
pH : Alkaline (11.3 – 11.5)
None. Rxsol-2000 is an alkaline product & should be handled like other chemical Avoid contact with Eyes, Skin, in case of contact, wash with copious amounts of water immediately.
Freezing Point - 17 0 c
Nitrite (as PPM NO2) 0 100-200 300-600 700-900 1100-1300 1440-2400
RXSOL CIDC /1000L 13.0 11.3 8-10 5-7 1.5-3.5 0
METHOD OF USE
1. Properly clean the system with water and alkaline liquid, if necessary.
2. Add 0 .15-1.5 % of RXSOL CIDC in the system or recommended Nitrite level 1400 – 2500 ppm can be measured and controlled by any standard RXSOL test kit for Nitrite, Chloride test also helps to detect excess contamination to maintain acceptable levels. when the product is dosed as recommended limit By buffering action of RXSOL CIDC, pH should be maintained between 8.3 and 10 by the treatment.
|
Properties |
||
|
Appearance |
Clear yellow liquid |
VERY EFFECTIVE FOR THE CONTROL MUSSELS MICRO-ORGANISMS AND BIOLOGICAL GROWTH. |
|
Density |
In g/cm3 at 1 5°C: 1.17 |
Liquid treatment which is easy to use. |
|
Flash Point |
Above 75°C |
Maintains heat transfer in systems . Reduces maintenance and down time. BIODEGRADABLE . |
| Compatibility | ||
| Metal | No known effect | |
|
Rubber |
No known effect |
NOT suitable for drinking water. |
|
Packaging |
RXSOL-40-4003-025, 25 Ltr |
No danger to marine life when used as recommended. |
Sampling And Testing
A sample of boiler water should be drawn for analysis daily. The sample should always be taken from the same point after blow down, cooled and tested immediately. Follow the Rxsol Hardness Test Kit instructions and fill the Boiler Water Log Form according to result results. It is important that regular testing is carried out to ensure levels of treatment are correct.
Physical Properties :
Appearance :White powder
Corrosive action : non
pH 1% solution : 8,8
Flash point : none
A precipitant designed to elimate scale deposits and lower the hardness of water in boilers with working pressure up to 60 bars.
It is used in conjunction with alkaline liquid to prevent calcium scale deposits. Both products are used in our standard boiler water treatment programs for low-pressure boiler systems (0-32 bar) and medium-pressure steam propulsion vessels (32-60 bar).
Appearance: Clear, Colorless liquid
Physical State: Liquid
Color: Colorless
Odor: Characteristic Odor
Odor threshold Not applicable
pH <= 3.7
Melting point/freezing point -22 °C
Boiling Point/Range 105 °C
Flash point Not flammable
Evaporation Rate No information available
Flammability (solid, gas) Not flammable
Flammability Limit in Air Not applicable
Upper flammability limit:
Lower flammability limit:
Vapor pressure 26 mm Hg @ 30 °C
Vapor density No information available
Density 1.10 g/cm³ @ 20ºC
Specific gravity 1.10
Water solubility completely soluble
Solubility in other solvents No information available
Partition coefficient log Kow = -1.5 @ 20 °C
Autoignition temperature Not combustible
Decomposition temperature 100 °C
Viscosity, kinematic 1.06 cP @ 20 °C
Viscosity, dynamic No information available
Explosive properties No information available
Oxidizing properties Strong oxidizer
Molecular weight 34
Bulk density Not applicable
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
