Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
PHYSICAL AND CHEMICAL PROPERTIES:
-Appearance: Liquid
-Colour: Amber to dark brown
-Odour: Hydrocarbon
-pH in aqueous solution: 6,3 (5%)
-Flash point (Pensky/Martens) (°C): 62
-RELATIVE Density: 0.9
-Solubility in water (% weight): Insoluble in water
- Viscosity at 20°C (mPas): 9
-Relative vapour density (air=1): >1
-Evaporation rate (ether=1): >1
-Melting point, (°C): < - 34
-Package Type: 210 Ltrs Drums
-Storage Stability: 720 days
Corrosion Inhibitor RX 1642 Refinery Crude Unit Overhead are efficient corrosion inhibitors developped to protect oil and gas production installations against internal corrosion. This includes protection of water systems specific to oil fields (produced water disposal systems and production, treatment and injection waters facilities). Corrosion Inhibitor RX 1642 Refinery Crude Unit Overhead offers an optimum corrosion inhibition whatever the fluid characteristics and field conditions: CO2 and/or H2S p
|
Appearance |
Clear Liquid |
|
Solubility in water (% by weight) |
100 |
|
PH |
8.8 -9.5 |
|
Thermal Stability |
160oC |
Biocide 6111 must be applied according to appropriate national and local regulations. Biocide 6111 is registered for use in the United States. As with all biocides applied in the United States, Biocide 6111 is regulated by the U.S. EPA under the Federal Insecticide, Fungicide and Rodenticide Act (FIFRA). It is a violation of federal law to use this product or any biocide in a manner inconsistent with its product label. U.S. EPA Registration Number 1706-153 is approval forBiocide 6111 use in: Industrial Cooling Tower Systems and Process Water Systems Industrial Recirculating Closed Loop Water Cooling Systems Air Washer Systems and Brewery Pasteurizers Pulp and paper mill influent water systems (but note this use is not currently authorized in California) Biocide 6111 is registered for use in Canada. The federal legislative authority for the regulation of pesticides in Canada is the Pest Control Products Act. As with all biocides applied in Canada, the use of Biocide 6111 is subject to Federal regulation and regulation under provincial/territorial authority. The Pest Management Regulatory Agency (PMRA) administers the Pest Control Products Act (PCPA) for the federal Minister of Health. Canadian PCPA Registration Number 17338 is approval for Biocide 6111 use in: Industrial Recirculating Cooling Water Systems Industrial Process Water Systems. This control product is to be used only in accordance with the directions on the product label. It is an offense under the Pest Control Products Act to use a control product under unsafe conditions. Please refer to the product label (U.S. or Canadian) for specific directions of use (including initial dosage and subsequent dosages, and other detailed, product-specific information ). Product labels can be accessed in theRXSOL EH&S (Environmental Health and Safety) database. Refer to the Material Safety Data Sheet (MSDS), SECTION 15 for the most recent information on approvals.
| Appearance : | clear, light green liquid |
| pH : | 3.5 |
| Density (kg/m3) : | 1030 |
| Solubility : | completely miscible in water |
| Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seekmedicaladvice. If swallowed, drink large quantities of milk, egg whites or a gelatine solution. If these are not available, drink large quantities of water. Do not induce vomiting. Seek medical advice immediately. Small spills can be flushed with water. Large spills should be collected for disposal. Use Biosperse 250 safely. Always read label and product information (M.S.D.S.) before use.
Packaging
This product is available in a variety of packaging sizes.
Important Information
Typical Properties: Refer to the Material Safety Data Sheet (MSDS).
Regulatory Information
Refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety
Use the health and safety information contained in the MSDS to develop appropriate product handling procedures to protect your employees and customers. Our MSDS should be read and understood by all of your supervisory personnel and employees before using.
Physical Properties :
| GrindSize | Fine | Medium | Coarse |
| Finer than 8 mesh | ----- | ------- | >95% |
| Finer than 50 mesh | > 80% | ||
| Finer than 100 mesh | > 90% | < 60% | < 15% |
| Median (microns) | 44-74 | 104-149 |
420-840 |
PHYSICAL PROPERTIES
| Appearance | Clear red amber liquid |
| Odour | Alcohol |
| Specific Gravity | 0.95 - 0.99 |
| Flash Point | > 20°C |
| Charge | Nonionic |
| Melting Point | NA |
| Solubility in water | Complete |
Typical Physical Properties:
Physical appearance :Light Pale Brown liquid
Specific gravity :1.01-1.02
pH (1% solution) :8.2
Solubility in water :100%
Freezing point :32°F (0°C)
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
