Cationic Polyacrylamide Flocculant

Product Code: RXSOL-40-4160-051

Size:

Color:

Product Short Description: Polyacrylamide Flocculant to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.
Product Technical Specification:
Remarks:
Images: Alt

Partial Hydrolyzed Polyacrylamide PHPA

Product Code: RXSOL-40-1534-025

Size:

Color:

Product Short Description: Is a co polymer of anionic character and high molecular weight
Product Technical Specification:
Remarks:
Images: Alt

Potassium Alum

Product Code: RXSOL-91-6027-025

Size:

Color:

Product Short Description: Potassium alum is commonly used in water purification, Leather Tanning, Dyeing, Fireproof Textiles, and Baking Powder.
Product Technical Specification:
Molar Mass 258.192 g/mol (anhydrous)

474.37 g/mol (dodecahydrate)

Density 1.725 g/cm3
Melting Point 92 to 95 °C (198 to 203 °F; 365 to 368 K)
Boiling Point 200 °C (392 °F; 473 K)

 

Test Specification Result
Appearance (Color) White White
Appearance (Form) Powder Powder
Solubility (Color) Colorless Colorless
Solubility (Turbidity)
0.5M, H2O
Clear to Slightly Hazy Clear
Calcium (Ca) _< 0.0005 % < 0.0005 %
Copper (Cu) _< 0.0005 % < 0.0005 %
Iron (Fe) _< 0.001 % 0.001 %
Magnesium (Mg) _< 0.005 % < 0.005 %
Sodium (Na) _< 0.02 % < 0.02 %
Phosphorus (P) _< 0.0005 % < 0.0005 %
Lead (Pb) _< 0.001 % < 0.001 %
Zinc (Zn) _< 0.0005 % < 0.0005 %
Chloride (Cl)
< or = 0.0005%
Pass Pass
Insoluble Matter _< 0.005 % 0.002 %
Ammonia (NH4)  _< 0.005 % 0.002 %
Purity by Titration
by EDTA
_> 98.0 % 99.8 %

 

 

Form         Liquid
Colour Dark brown
Odour Hydrocarbon-like.
Odor Threshold No Information Available
pH Not Applicable
Melting Point < -40 °F (< -40 °C)
Boiling Point 348.8 °F (176 °C)
Flash Point 150.1 °F (65.6 °C) Pensky-Martens Closed Cup
Evaporation Rate  < 1 (Ether =1)
Flammability (solid, gas) Not Applicable
Explosive limits Lower / Uper Not Available
Vapour pressure  < 5 mm Hg @ 21°C
Vapour Density > 1 (Air =1)
Secific Gravity 1.42
Decomposition Temperature No information available
Partition coefficient No data available
Autoignition Temperature No data available
Solubility in Water Not Soluble
Viscosity  < 400 cSt @ 60°F
Explosive properties
Remarks:
Images: Alt

Antifoam 204

Product Code: RXSOL-12-2066-026

Size:

Color:

Product Short Description: Mechanism of foam breakage by a defoamer. This inolves spreading of an water-insoluble surfactant on the bubble surfaces.
Product Technical Specification:
Remarks:
Images: Alt

Polyacrylate Dispersant

Product Code: RXSOL-40-4003-027

Size:

Color:

Product Short Description: Low and narrow molecular weight polyacrylate having a sodium cation.
Product Technical Specification:
Remarks:
Images: Alt

Seawater Dispersant SWD

Product Code: RXSOL-40-4003-026

Size:

Color:

Product Short Description: Seawater dispersant is a highly effective dispersant for keeping seawater cooling system free from marine fouling. Keeping seawater cooling systems free from microbiological bacteria and fungi or macro biological.
Product Technical Specification:
TYPICAL PHYSICAL PROPERTIES
Appearance:                             Clear, water-white liquid
Odor:                                          Fresh, pleasant odor
Specific Gravity @25°C:          0.989
Flash Point (PMCC):                None
pH:                                              7.0 - 8.5
Water Solubility:                        Complete in all proportions
Remarks:
PACKAGING
Seawater dispersant is available in 25-liter containers (PCN 5148409).For vessels which operate continuously in coastal waters,
we recommend dosing every three days. For all oceangoing vessels, we recommend dosing every two days while in coastal waters and at a minimum dose of once a week when not.  Seawater dispersant should not be fed to a system while the seawater is being drawn as makeup for an evaporator or water maker. Either isolate the evaporator or shut it down while Seawater dispersant is being dosed and for at least 30 minutes afterward.
Images: Alt

Sodium Sulphide Solution

Product Code: RXSOL-40-1622-250

Size:

Color:

Product Short Description: Colourless water-soluble salts that give strongly alkaline solutions
Product Technical Specification:
Remarks:
  • Used as Depilatory reagent and in pharmaceutical Industries.
  • Used in obtaining the sulphur Black Dyes.
  • Used in Ore Floatation.
  • Used in Engraving and also used as analytical reagent.
  • Used for removing sulphur in viscous Rayon Industry.
  • Used in Industries to remove heavy metals from waste water.
  • Used in the manufacture of lubricating oils.
  • Used in the production of polysulphide elastomers.
  • Used in Synthetic cooking liquor.
Images: Alt

FORMIC ACID

Product Code: RXSOL-19-1193-250

Size:

Color:

Product Short Description: Formic acid use as a preservative, antibacterial agent, cleaning agent and coagulant in rubber industries.
Product Technical Specification:

 

 PRODUCT NAME  : FORMICACID  
 CAS number     : 64-18-6
 UN number   : 1779
 Formula    : HCOOH
 Odour   : PENETRATING
 Solubility in water   : COMPLETE
 Density           :  1.22     at 20 oC
 Boiling point  : 101oC
 Melting point  : 8 oC
 Viscosity   : 1.80 cp at 20oC
 Flashpoint  : 42oC
 Explosive limits     : 10 – 45.5 Vol%
 Vapour pressure    : 42 mbar at 20oC
 Skin absorption/irritation    : YES
 TLV       Country  NL             Year  1995   : 5 ppm                    9          mg/m3
 Pollution category    1994 : D

 

Remarks:
Images: Alt

BTC Zyme

Product Code: RXSOL-40-1496-001

Size:

Color:

Product Short Description: Zyme BTC is a unique biological active liquid formulation containing specialized bacterial strains, biodegradable low foaming chemical cleaners and anti foam agents.
Product Technical Specification:

APPEARANCE

Green liquid

pH, in conc.

9

DENSITY, in g/cm3 at 15°C

1.0

COMPATIBILITY

 

Metal

No known effect

Rubber

No known effect

Synthetic rubber

No known effect

Remarks:
Images: Alt

ANTI SCALANT for WASTE WATER

Product Code: RXSOL-40-9103-220

Size:

Color:

Product Short Description: ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED
Product Technical Specification:

 

Appearance : Clear, yellow liquid
Density : 1.14 – 1.16 g/cm3
Viscosity : Approx. 50 mPa.s
pH-value : 4.8 – 5.3
Boiling Point : 105° C
Freezing Point : -10° C
Solubility in water : unlimited
Remarks:
Images: Alt
stock-clearance.png