Mark Ship Chandler:


Nitric Acid 30 Kg

Size:

Color:

Product Short Description: Nitric Acid
Product Technical Specification:

 

PRODUCT NAME        : NITRICACID (>70%)
CAS number     :  
UN number         : 2032
Formula        : HNO3
Odour        : Pungent
Solubility in water         : COMPLETE
Density       : 1.503   at 25 oC
Boiling point           : 83 oC
Melting point          : -42 oC
Vapour pressure          : 24 mbar at 20 oC
Skin absorption/irritation   : YES
TLV       Country  NL             Year  1995  : 2 ppm                   5          mg/m3
Pollution category    1994           :  C

 

Remarks:
Images: Alt


SILCOMINE

Size:

Color:

Product Short Description: Silicone fluid developed for use as a base in formulating textile softeners and lubricants. It is a cost effective amino silicone that imparts a typical soft amino hand.
Product Technical Specification:

TYPICAL PROPERTIES:

Appearance Clear to slightly hazy
Odour Slight amine odour
Viscosity (250C) 800-5,000 cst
Specific Gravity (250C) 0.98
Active Content % 100
Amine Number 0.4
 
Remarks:
Concentrated Silicone Emulsions
Pretreatment Chemicals are used to convert raw fiber, yarn, or fabric into substracts suitable for dyeing printing and finishing. These fibers, yarns, fabrics could be of cotton, wool, silk, synthetics and blends of those. The pre treatment processes include :Concentrated Silicone Emulsions

Desizing
Scouring, wetting (removal of oils, waxes, dirt, etc thus imparting absorbency)
Bleaching (removal of natural coloring matter)
Mercerizing (increasing dye-ability, lustre and strength)
Pretreatment requirements are as follow:
Uniformity and levelness of effects
High absorbency
Low ash content
Freedom from size
High degree of whiteness
Absolute absence of husks
High dye absorbing power
Thus pretreatment occupies a critical position in wet processing. More than 60% of the problems encountered in finished fabrics are directly attributed to lack of proper preparation.
Images: Alt


Industrial Alcohol

Size:

Color:

Product Short Description: Industrial Cleaner , Thinner for termination kit (cable cleaner)
Product Technical Specification:

 

Purity : 99.89
Odour    : CHARACTERISTIC
Solubility in water     : COMPLETE
Density    : 0.792   at 20 oC
Boiling point   : 65 oC
Melting point     : -94 oC
Viscosity    : 0.62 cp at 15oC
Flashpoint          : 12 oC

Explosive limits   

 : 5.5 – 37 Vol%
Vapour pressure     : 127 mbar at 20 oC
Skin absorption/irritation     : YES
TLV       Country  NL              Year  1995    : 200 S ppm            260 S   mg/m3
Pollution category    1994   : D
 
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Di Glycol Amine

Size:

Color:

Product Short Description: Diglycolamine is a colourless, slightly viscous liquid with a mild amine odour. DGA is miscible with water, alcohols, and aromatic hydrocarbons but relatively immiscible with aliphatic hydrocarbons and ethyl ether.
Product Technical Specification:

Diglycolamine is a colourless, slightly viscous liquid with a mild amine odour. DGA is miscible with water, alcohols, and aromatic hydrocarbons but relatively immiscible with aliphatic hydrocarbons and ethyl ether.

Appearance Clear 
Colour, Pt-Co 35 max. ST-30.12
DIGLYCOLAMINE, wt% (by titration) 98 min.
Water, wt%  0.5 max. 
Boiling point, °C  221
Flash point, PMCC, °C 124 
Freezing point, °C -12 
pH 12
Specific gravity, 20/20°C 1
Vapor pressure, mm Hg, 20°C (68°F) < 0.01
Vapor Density 4
Viscosity, cSt, 51.7°C (125°F) 7.5
Water solubility > 10 
Remarks:

Chemical Names: 2-(2-AMINOETHOXY)ETHANOL, Diglycolamine, 929-06-6, 2-Aminoethoxyethanol, Ethanol, 2-(2-aminoethoxy)-, Diethylene glycol amine

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Kerosene

Size:

Color:

Product Short Description: Kerosene
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Creosote Oil

Size:

Color:

Product Short Description: High quality material and available in light and heavy forms. The excellent properties of Creosote Oil work for preserving posts and wood
Product Technical Specification:
Property                                              Unit               Min                   Max                 Typical

Specific Gravity at 30 °C                    g/ml             1.020                 1.150                1.100

Distillation Limits                                  %                                        

        0 -235 °C                                                                                      20                     8

        0-300 °C                                                            30                       60                    50

        0-355 °C                                                            65                                               78

Water Extractable Phenol               %m/m                                            3                    0.05

Toluene Insoluble                            %m/m                                            1                    0.38

Moisture %                                        %                     1.5                                              0.5 

Crystallizing Temperature               °C                                                20                       2

Liquidity after heating up to 38 °C   °C                   Completely Liquid                Completely Liquid

and keeping at 32 °C for 2 hours  

 Flash Point                                      °C                    66                                                 86

Naphthalene Content                        %                                               10                      <2

Recommended for                        Telegraph and electricity treansmission poles , fencing and structural tombers.

These values are typical and only representing the value in our laboratory with our test methods performed on representative sample and not on actual product supplied. The specification may change without notice.
 
Remarks:
Safety Creosote contains phenols. Use PVC or Polychloroprene gloves and face shield are desirable.
 
First Aid If splashed thoroughly irrigates the eye under a running cold-water tap. Use copious quantities of buffered phosphate solution if available. Get medical aid as soon as possible.
 
Skin Immediately wash with industrial methylated spirit or Isopropanol followed by a wash with soap and water.
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


ETHYLENE GLYCOL

Size:

Color:

Product Short Description: ETHYLENE GLYCOL - INDUSTRIAL GRADE - Recommended use: industrial chemicals; antifreezing agent
Product Technical Specification:
PRODUCT NAME  : ETHYLENE GLYCOL,  Di-ethylene glycol(Ethane 1-2 Diol)
CAS number  : 107-21-1
Form Phase   : Liquid
Colour : clear
Formula   : CH2OHCH2OH
Odour    : ODOURLESS
Solubility in water    : COMPLETE
Density    : 1.11 at 20 oC
Boiling point       : 197      oC
Melting point    : -13  oC
Flash Point    : Not Applicable
Ignition Temperature : 410  oC
Explosive limits   : Product does not present an explosion hazard.
Vapour pressure   : .07 mbar at 20 oC
Skin absorption/irritation  : YES
TLV       Country  NL                Year  1995  : 10 ppm                 26        mg/m3
Pollution category    1994 : D
 
Solubility in / Miscibility with water at 20°C : Fully miscible. g/l (Fully miscible.)
     
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


ISO PROPYL ALCOHOL

Size:

Color:

Product Short Description: 2-Propanol also called Isopropyl Alcohol. Suitable for Electronic cleaning Uses
Product Technical Specification:
ISOPROPYL ALCOHOL (PURE)
Test Test method Results

Appearance
By eyes
Clear
Sp. Gr 20/20°C
ASTM D268
0.785 - 0.787
Purity weight
G. C.
99.8 min.
Water weight
ASTM D136
0.15 max.
Misciblity with water
ASTM D1720
Pass
Acidity as Acetic Acid
ASTM D1613
0.001 max.
Distillation (range)
ASTM D1078
82.4
Non-Volatile matter mg/100ml
ASTM d1353
2.0 max.
Colour Alpha
ASTM D1209
10 max.
Permanganate time at 25°C
ASTM D1363
Over 30 min.
Remarks:

 

 PRODUCT NAME   : ISOPROPYLALCOHOL
 CAS number    : 67-63-0
 UN number      : 1219
 Formula      : (CH3)2CHOH
 Odour     : SHARP, SOMEWHAT UN PLEASANT
 Solubility in water    : COMPLETE
 Density     : 0.783   at 20 oC
 Boiling point  : 82 oC
 Melting point     : -90 oC
 Viscosity   : 2.86 cp at 15 oC
 Flashpoint    : 7 oC
 Explosive limits  : 2 – 12 Vol%
 Vapour pressure      : 44 mbar at 20 oC
 Skin absorption/irritation     : YES
 TLV       Country  NL             Year  1995      : 400 S ppm             980 S   mg/m3
 Pollution category    1994         : III
 
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Muriatic Acid

Size:

Color:

Product Short Description: Muriatic acid in forms acidic mists. Muriatic Acid supplier and exporter.
Product Technical Specification:

PRODUCT SPECIFICATION SHEET

Muriatic  ACID

Parameters

Specification Range

Typical

% Active Content

31.45 – 32.5

32.0

Specific gravity @ 60°F

1.160 – 1.166

1.162

Degree Baumē (Bē)

20.0 – 20.6

20.4

Iron (ppm)

0.5 – 1.0

< 0.5

Color (APHA)

5 - 20

< 5

Total organic compound (ppm)

2 – 5

< 2.5

Oxidizing substance (as cl2 ppm)

0 – 30

< 5

Freezing Point

-49°F

  
 
Remarks:

Muriatic acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with Muriatic acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App


Gypsum Remover

Size:

Color:

Product Short Description: Most efective product to dissolve high capacity for calcium and magnesium compounds.
Product Technical Specification:
PROPERTIES
Appearance: Clear liquid
pH (1% solution): 3.00±1.00
Specific gravity @ 25°C: 1.120±0.050
Remarks:

RXSOL Gypsum remover, Dissolves large quantities of gypsum lasts longer and save time and man power.

Images: Alt
stock-clearance.png