Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Product Code: RXSOL-16-2064-025
| Physical appearance | Clear free flowing brown colour homogeneous liquid |
| Specific Gravity @ 25° C | 0.92 ± 0.02 |
| Viscosity @ 25° C | < 30 cps [cst] |
| Pour Point | < 0° C |
| ph range | 5.0 – 8.0 |
| Solubility in Hydrocarbons | Soluble |
| Solubility in water | Insoluble |
| Flash point ° C | >60° C |
| Shelf Life | Minimum two years |
| Packing |
25 Ltrs. |
Storage and Handling :
RXSOL DEMULSIFIER shall be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be handled with dry absorbent like sand, sawdust, etc. On ingestion / eye contact with the product, medical attention should be sought immediately.

Product Code: RXSOL-16-1652-005
| Property | Typical Value |
|---|---|
| Product Name | Disinfecting Antiseptic All Purpose Cleaner |
| Appearance | Clear to slightly hazy liquid |
| Colour | Colourless to pale coloured |
| Odour | Mild / characteristic |
| pH | Typically 6.5-9.0* |
| Specific Gravity @ 25°C | Typically 0.98-1.05* |
| Solubility | Completely soluble in water |
| Foam | Low to moderate |
| Base | Water-based |
| Flash Point | Normally not applicable for aqueous formulation* |
| Application | Spray / mop / wipe / bucket |
| Rinsability | Good on suitable surfaces |
| Storage | Cool, dry and ventilated area |
The product is designed to provide:
CLEAN → DEGREASE → DISINFECT → DEODORIZE
For routine maintenance cleaning, the same application can provide both soil removal and antimicrobial treatment.
Where heavy contamination is present, use a separate cleaning/degreasing step before disinfection. This is particularly important where heavy organic material may remain on the surface.

Product Code: RXSOL-16-1753-025

Product Code: RXSOL-16-1029-010
STRUCTURE :
HEAD - Molecule have a long chain non polar Hydrocarbon, whose structure can be Studied as follows:-
Head : It is water soluble & ‘-‘Vely charged.
Tail : It is oil soluble.
CLEANSING ACTION
When solution water is poured over the DIRTY surface the hydrocarbon Tail of the each molecules peg in to it, while the (–ve) HEAD is held in water. The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling and stirring. Each grease globule thus separated in PIN CUSHIONED by hydrocarbon TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.

Product Code: RXSOL-16-1672-025

Product Code: RXSOL-20-2050-025
- Odour: Characteristic odour
- Appearance: Liquid, colourless to yellow
- Vapour pressure - not known
- Freezing point 0 °C
- Completely soluble in water
- Auto-ignition point >150 deg C at 760 mm Hg- Odour: Characteristic odour
- Appearance: Liquid, colourless to yellow
- Vapour pressure - not known
- Freezing point 0 °C
- Completely soluble in water
- Auto-ignition point >150 deg C at 760 mm Hg
Exchange of Heat in between Shell side and lube oil of coolers are directly effecting output of cooling effect. Regular chemical cleaning of Heat Exchanger baffles and fins for enhanced heat exchange into the system.
RXSOL Lube Oil Cleaner is a powerful multi-purpose cleaner formulated to remove lube oil, oil mixed with hard deposits such as rust and lime.
It also effectively dissolves residues originating from glycol and similar process fluids.
The product is designed to tackle complex and mixed contaminations across multiple industrial applications.
It is suitable for manual cleaning as well as Cleaning-in-Place (CIP) of separators, heat exchangers, tanks and piping systems.
Key Features of Lube Oil Cleaner

Product Code: RXSOL-16-1659-025

Product Code: RXSOL-16-1663-025

Product Code: RXSOL-16-1001-500

Product Code: RXSOL-16-3764-210
| Typical Physical Properties | RXSOL-16-3764-210 |
RXSOL-16-3764-210 No Dye
|
| Appearance | Clear Dark Green Mobile Fluid | Clear Amber Fluid |
| Specific Gravity @15.6°C | 1.063 | 1.063 |
| pH (neat) | 10.0 | 10.0 |
| pH @ 2% | 9.4 | 9.4 |
| Pour Point | -40°C (-40°F) | -40°C (-40°F) |
| Kinematic Viscosity (cSt)-20°C (-4°F) | 740 | 740 |
| 0°C (32°F) | 82 | 82 |
| 20°C (68°F) | 20 | 20 |
| 40°C (104°F) | 7 | 7 |
RXSOL Hydraulic & BOP Control Fluid Concentrates offers excellent technical and environmental performance and contains a fluorescent dye that aids in leak detection. Stable up to 145°C / 293°F, this fluid is suitable for some operations at 145°C and specified for high temperature wells. OCEANIC HW 443 R offers high compatibility with other materials typically used in subsea production control equipment.
