Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
specification:-
Appearance: | Colourless |
Specific gravity (water=1) | > 1 |
Viscosity: |
600 mm2/s at 23°C |
Flash point: | >100°C |
pH: | 6-8 |
Miscibility with water | In all proportions |
Appearance | Clear, Yellowish Amber Liquid |
Flash point | Non-flammable |
Solubility in water | Soluble in all proportions |
Freezing Point | -15 Degree |
SAFETY INFORMATION:
Gloves and goggles should be worn as a precaution when handling the concentrated solution. (See Material Safety Data Sheets for further information).
SAFETY INFORMATION:
Gloves and goggles should be worn as a precaution when handling the concentrated solution. (See Material Safety Data Sheets for further information).
Antiscalant 9209 RX is compatible with carbon steel and other commonly used materials of construction. Observe all safety precautions shown in the material safety data sheet, available on request.
Keep in a tightly closed container in storage closed area . Recommended storage temperature is 500C
Appearance | Greenish-yellow |
Odor | Lemon scent |
Solubility in Water | Complete |
Specific Gravity | 0.990-1.000 |
pH (l%) | 10.3-10.5 |
Other Grade of Coil Cleaner :::
Coil Brite Rx Yellow - Part No.- RXSOL-16-1680-005 --- www.rxmarine.com/coil-brite
Coil Cleaner - Part No.- RXSOL-41-8672-025 --- www.rxmarine.com/Coil-Cleaner-RXSOL
Coil Cleaner ( Non Rinsing Type ) - Part No. - RXSOL-16-1697-025 --- www.rxmarine.com/coil-cleaner-non-rinsing
Condenser Coil Cleaner - Part No.- RXSOL-50-5015-025 --- www.rxmarine.com/Condensor-cleaner
Evaporator Coil Cleaner ::: Part No.- RXSOL-51-6004-025 --- www.rxmarine.com/evaporator-coil-cleaner
Coil Cleaner Free from ACID ::: Part No.- RXSOL-16-1082-025 --- http://rxmarine.com/Coil-Cleaner-Free-from-ACID
C-SHINE Alkaline coil cleaner ::: Part No- RXSOL-16-1668-025 --- www.rxmarine.com/C-SHINE-RXSOL-coil-cleaner
Caution: Avoid contact with eyes, skin and clothing. This product contains organic cleaners and inorganic dispersants. Wear goggles and protective clothing. Do not breath mist. For external contact, flush with water for 10 minutes. If taken internally, drink large amounts of water, followed with milk of magnesia, beaten eggs, or vegetable oil. Call a physician immediately. KEEP OUT OF THE REACH OF CHILDREN. Before using of this product always refer MSDS.
CharactersItics | Properties | |
Appearance Thermal Firmness | Clear yellow liquid 250° C | By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency. |
Density | In g/cm3 at 15°C: 1.1 |
Permits more efficient evaporation. |
pH (1 Vol%) | 9 |
Reduces downtime and maintenance costs. |
Compatibility | Concentrated, safe liquid, easy and economical dosing. | |
Metal | No known effect |
For use in both high pressure and vacuum evaporators |
Rubber | No known effect | The antifoaming properties ensure that distillate quality is high |
Packaging |
20 / 25 ltr |
Improves the quality of distilled water |
RXSOL-51-6001-025 is a concentrated solution of a POLYELECTROLYTE polymer and Antifoaming Agents for use in SEA WATER evaporator as a controller of scale and foam in side the evaporators. It can be used as a scale inhibitor in the feed water to EVAPORATORS producing fresh water .
A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators
Products Properties:-
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels
Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action Easy to Use its POWDER can be applied by either blowing with conventional air blasting equipment or other methods using compressed air . Can be applied by sprinkling , rinsing or dipping metals in a solution of RXSOL-50-5007-020 , hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Weight |
25 kg |
Density |
1.2 |
Packing, Type |
Plastic |
pH |
9 |
Colour |
WHITE |
Appearance |
POWDER |
Control Procedure:-Control is by simple boiler water tests or RX CLEANSERS can provide a suitable test kits for this purpose
Appearance |
Clear liquid |
Solubility In Water |
Complete |
pH (1 Vol %) |
-13 |
Compability |
|
Metal |
Corrosive to aluminium, magnesium, zinc and tin. |
Rubber |
No known effect. |
Packaging |
Product Size (in Kg ) |
Packaging, Handling, First Aid & Storage:-RXSOL-50-5004-007 is generally supplied in drums containing 25 Kg/50 Kg barrel . Avoid contact with skin and eyes wear goggles & PVC gloves when handling. Keep an eye wash bottle close to the point of use. Do not take internally.On contact with Skin/Cloth, wash immediately with cupious amount of water. If eyes are affected they should be washed with water for at least 15 Minutes and medical attention sought immediately. If swallowed do not induces vomiting give plenty of water and call doctor immediately.
**Keep drums tightly closed when not in use.**