Linear Formula: H4N2 · H2O

For water Treatment, Hydrazine Hydrate GRADE : 

Always use Goggle and Handgloves before handling of this product.  Caution: Avoid contact with eyes, skin and clothing. This product contains organic cleaners and inorganic dispersants. Wear goggles and protective clothing. Do not breath mist. For external contact, flush with water for 10 minutes. If taken internally, drink large amounts of water, followed with milk of magnesia, beaten eggs, or vegetable oil. Call a physician immediately. KEEP OUT OF THE REACH OF CHILDREN.

We Shop and sale Condenser Coil Cleaner for INDIA and UAE at very economical price. RXSOL brand manufacturer Condenser Coil Cleaner and holding good network to supply as Condenser Coil Cleaner supplier in mumbai, Navi Mumbai, Tata, Rabale, Panvel, Goa, Pune, Nashik, Surat, Gandhidham, Kandla, Manglore, visakhapatnam, Vizag, Ennore, Chennai, Kolkata, Haldia, Paradip, Ranchi, Fujairah, Dubai, Sharjah, Abudhabi, Middle East, Gulf. RXSOL group classified as exporter of Condenser Coil Cleaner for Turkey, Bangladesh, Africa.

Wide Range of Ultrasonic Cleaning Solutions from RXSOL

Ultrasonic cleaning solutions can be essential when using an ultrasonic cleaner to achieve your desired results. Vibronics Pvt. Ltd stocks a range of solutions which will cater for a wide range cleaning needs. Following are the cleaning solutions provided by us.

APPLICATION METHODS:

Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.

SUGGESTED INSTRUCTIONS FOR USE:

•  When handling RXSOL-37-1697-220 or any other strong chemical, be sure to wear chemical imperviousgloves,apron and splash goggles.
   
• Determine required dilution ratio for the specific application. It is recommended to start with a dilution ratio of 10:1 and increase concentration until the desired results are achieved.
   
• As with mixing all acids, place the desired amount of water into the tank and then add RXSOL-37-1697-220.
   
•   Turn off fans and allow hot coils to cool before applying.
   
• Using plain water, wet both the condenser coil as well as the area surrounding the equipment. Wetting the coil with water aids in product penetration and performance.
   
• Apply the properly diluted product to the coil surface. Whenever possible, apply solution from the outlet side of the coil. Allow product to remain on surface, normally 5-10 minutes. Do not allow product to dry on the coil. Note: In extreme cases, application may have to be repeated to achieve desired results.
• If foaming does not occur, check for extreme grease buildup which will slow cleaning process. Foaming may not occur if coil is coated or painted.
   
•   Rinse coils, tools and surrounding area thoroughly after completing the coil cleaning process

Distilled Water, Battery Distilled Water, Windshield Wiper Fluid, Distilled Water For Home, Industrial Water, SPA & Saloon Distilled Water, Radiator Coolant Water, Laboratory Water, Medicated Water, Aquarium Water and Saloon Distilled Water.

1) Fogging System 2) Vapour Phase System 3) Direct Dosing into liquid

It is worth explaining, that, unlike masking agents,RXSOL Odor Eliminator does not blow away in the wind. Being positively charged, it will seek out target molecules and bond to them resulting in a chemical reaction forming a non-volitile organic salt. If a RXSOL Odor Eliminator molecule does not find a target, it will attach itself to a negatively charged surface and wait for an odorous molecule. As with all gases, the odorous molecules are constantly moving and, given time, will come into contact with a  RXSOL Odor Eliminator molecule and be destroyed.

Fogging System:

Fogging systems spraying RXSOL Odor Eliminator  are used when odour is from open-air sources.RXSOL Odor Eliminator is sprayed on an interval basis depending on odour type and strength. An example of this is running the system for 30 seconds ON and 2 minutes OFF.

Some examples of facilities where fogging systems can be used:
 

• Waste Water/Sewage Treatment Plants
• Refuse Transfer Stations
• Steel Manufacturing Slag Beds
• Contaminated Soil Remediation
• Pig Farms
• Sludge Lagoons

Fogging systems spraying RXSOL Odor Eliminator  is also used in indoor facilities. Some examples are:
 

• Sewage Pumping Stations
• Slurry Pits

Vapour Phase Systems :

Vapour phase systems delivering  RXSOL Odor Eliminator is used when odour is from ducted, or confined, air sources. This type of application is designed to inject the vapour into a continuous flow air stream that is part of an exhaust or extraction process. These types of systems are delivering vapour into the air stream continuously. Some examples of these types of problems are:
 

• Manufacturing Process Exhaust Airflow
• Sewage Plant Air Extraction
• Sewage Pumping Stations
• ANY air emissions vented to atmosphere

Direct Dosing:

RXSOL Odor Eliminator  is exceptionally effective in capturing its target in a liquid solution. Liquid solutions only produce odours when they reach a point where cavitation occurs, say at the end of the pipe or weir. Odour is produced as a result of the reduction in water pressure and the odorous gases are stripped out of solution.

This method of application is ideal for waste treatment plants, animal and fish processing plants, and pig and chicken farms, which have wash down systems where waste water is collected and stored in a settlement pond system or holding tanks.

RXSOL Odor Eliminator  molecules will attach to the odorous compounds to remove toxins from the water and, over about seven days, will spread through the whole anaerobic/facultative/aerobic pond system to remove odours. This action chemically bonds (valency bond) to the odorous compound to form a non-toxic, non-odorous organic salt. Bacteria will then break down this salt. As a result, there is no increase in BOD, and no regeneration of foul odours.

RXSOL Odor Eliminator can best be thought of as a detoxifying catalyst that beneficially affects the pond ecology. It is extremely powerful.

RXSOL Odor Eliminator , which is not required to destroy toxic odorous compounds, will continue in the stream and neutralise any air that is stripped from the stream due to water turbulence at the treatment station or ponds.

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

Silica Gel Details
CAS No. : 112926-00-8
Chemical Name : Silica gel
CBNumber : CB1199389
Molecular Formula : O2Si
Formula Weight : 60.08