BIOCIDE for Closed Loop Chilled Water

Size:

Color:

Product Short Description: Very effective controler of BACTERIA and corrosion from closed loop chilled water system.
Product Technical Specification:

Specification


Form: Liquid
Colour: Colourless
pH: 3 – 5
Specific gravity: >1.2
Solubility in water: Completely miscible
Boiling point: >100 oC
Decomposition temp: Decomposes at boiling point
Remarks:

Description


BIOCIDE for Closed Loop chilled water is a high performance, broad spectrum organic biocide scientifically formulated for the treatment of open re-circulating cooling systems. RXSOL-40-4008-210 is a superior quality treatment that is ideal for the control of bacteria, fungi and algae in open re-circulating cooling systems and evaporative condensers. RXSOL-40-4008-210 is a proven high performing product that is that can be used where exceptional performance is critical.

RXSOL-40-4008-210 is low foaming and effective over a broad pH range.

 

Application and Dosage


Typically RXSOL-40-4008-210 should be dosed to give 80 ppm (80 g per 1000 lt). Dose at 160 ppm (160 g per 1000 Lt) for heavily fouled systems. Do not mix with other chemicals. Can be dosed by hand or through automatic dosing equipment. It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use. For further technical assistance concerning RXSOL-40-4008-210 please contact us.

Specification


Form: Liquid
Colour: Colourless
pH: 3 – 5
Specific gravity: >1.2
Solubility in water: Completely miscible
Boiling point: >100 oC
Decomposition temp: Decomposes at boiling point

 

Features and Benefits


  • High performance broad spectrum biocide
  • Contains glutaraldehyde
  • Ideal for open re-circulating cooling systems and evaporative condensers
  • Effective against a wide range of bacteria, algae and slimes
  • Effective against Legionella strains, the causitive organism of Legionnaires’ disease
  • Effective against sulphate reducing bacteria
  • Low foaming
  • Effective over broad pH range
  • Can be dosed in conjunction with other organic biocides to help clean up badly fouled systems
Images: Alt

Cooling Water Log Sheet

Size:

Color:

Product Short Description: Cooling Water Log Sheet
Product Technical Specification:
Remarks:
Images: Alt

MICRO BIOCIDE Cooling Water

Size:

Color:

Product Short Description: Effective controller of MICRO BIOCIDE and BACTERIA from condensor WATER system. being effective against most kinds of bacteriaa, algae and fungi. It is a particularly useful product for air-wash systems and is compatible with all commonly used antifoulants and corrosion inhibitors.
Product Technical Specification:
Remarks:
Where MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 can be used?

For the control of microbial biofilms, bacteria, algae, and fungi, add MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 to industrial recirculating water cooling towers, industrial recirculating closed loop water cooling systems, brewery pasteurizer and can warmer systems. Add MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 at some point in the system to ensure uniform mixing.

Dose Ratio of 
MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 
NOTE: Badly fouled systems should be cleaned before treatment.
 
INITIAL DOSE: if the system is initiating fouling then use 200 ml - 3 ltr of  MICRO BIOCIDE Cooling Water RXSOL-40-4009-025  for per 3000 to 5000 Ltr of water in the system.) Dose can be increased till optimum results.
 
WEEKLY CONTROL DOSE: When microbial control is evident, add 100 to 500 ml per MICRO BIOCIDE Cooling Water RXSOL-40-4009-025  for per 3000 to 5000 Ltr of water in the system
 
AIR WASHER SYSTEMS : Add to the air washer sump or chill water sump to insure uniform mixing, 200 ml  - 3 Ltr of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025  for per 3000 to 5000 Ltr of water in the system, DOSE ration directly proportional of  contamination to control microbial biofilms, bacteria, fungi, and algae which cause fouling in industrial air washer systems.
 


Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 for CONTINUOUS FEED METHOD  

Maintain this treatment level by adding a continuous feed of 100 ml to 1000 ml of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025  per 1000 gallon of makeup water).

NOTE : Badly fouled systems must be cleaned before initial treatment.
 
 
 
Dose Ratio of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 for INDUSTRIAL WASTEWATER TREATMENT SYSTEMS AND SEWAGE SYSTEMS

INITIAL DOSE for Noticeably Fouled Condition: 500 ml - 4000 ml of MICRO BIOCIDE Cooling Water RXSOL-40-4009-025  per 3000 Ltr of water in the system. Repeat until control is achieved. Badly fouled systems should be cleaned before treatment is begun.

SUBSEQUENT DOSE: When microbial control is evident, add 100 ml  - 100 ml MICRO BIOCIDE Cooling Water RXSOL-40-4009-025  per 3000 Ltr of water in the system.
Images: Alt

Engine Water Treatment DEWT

Size:

Color:

Product Short Description: Multi-functional corrosion inhibitor for protecting recirculating cooling and heating water systems. RXSOL LIQUID EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water. It is also ideally suited for use in chilled water systems because it forms a clear, non-st
Product Technical Specification:
Appearance : Light yellow liquid
Specific Gravity at 25° C (77° F) : 1.23
Flash Point (PMCC) :

None

Liquid :

Easy to dose, Cost effective

pH, Neat   12.3 - 12.9 Stabilizes cooling water pH
Freeze Point: : -12.2° C (10° F)
Freeze/Thaw Stability   Complete
 
Remarks:
Images: Alt

Anti Foaming Scale Inhibitor

Size:

Color:

Product Short Description: RXSOL scale inhibitors are customized to prevent mineral deposition while also removing deposits which have already formed.
Product Technical Specification:
Remarks:
Images: Alt

Engine Water Treatment EWT

Size:

Color:

Product Short Description: RXSOL LIQUID EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water. It is also ideally suited for use in chilled water systems because it forms a clear, non-staining solution, which protects the system from corrosion and hard water scale.
Product Technical Specification:

Appearance

Light yellow liquid

Specific Gravity at 25° C (77° F)

1.23

Flash Point (PMCC)

None

pH, Neat

12.3 - 12.9

Freeze Point:

-12.2° C (10° F)

Freeze/Thaw Stability

Complete

Remarks:
Images: Alt

Condensor Inhibitor

Size:

Color:

Product Short Description: POWERFULLY formulated condensor INHIBITOR , chemically control corrosion and scale in SYSTEM.
Product Technical Specification:
Remarks:
Images: Alt

Condensor Dispersant Scale Controller

Size:

Color:

Product Short Description: Condensor Dispersant Scale Controler For Radiators, DG - sets, Closed Cooling System, Specialy formulated for SCALE CONTROL
Product Technical Specification:
Remarks:
Images: Alt

Sodium Nitrite

Size:

Color:

Product Short Description: Sodium Nitrite is used in various industries. In the Pharmaceutical Industry it is used as an intermediate in production of saccharine. In the textile industry as a bleaching agent and in the Rubber Industry as a rubber foam blowing agent.
Product Technical Specification:
Remarks:
Images: Alt

GLUTARALDEHYDE

Size:

Color:

Product Short Description: Used for water treatment. Industrial water uses of glutaraldehyde include treatment of cooling water, wastewater, process water systems.
Product Technical Specification:

Product Specification : 

Product Specification Value Test Method
Assay % 50.0  - 51.0 Titrimetic
Methanol % Maximum 0.50 GC
pH Value 3.2-4.2 DIN 19 268
Colour APHA Maximum 50 DIN En 1557

Physical Properties :

Form : Liquid
Colour : Colouless to Yellow
Flash point   :  > 95 °C
 Boiling Point  : 101.5 °C ( 987.1 hPa)
Flammability  :  Not Flammable
 Solubility in Water  :  Soluble
 
Remarks:

Glutaraldehyde  is a colorless to yellow liquid, with a pungent odor. It is also miscible with water.

Formula...........................C5H8O2
Molecular Weight.............1.00.1
CAS Registry Number....111-30-8
 

Synonyms : -Glutaraldehyde, Pentanedial, 1,5-Pentandial, Glutaral

 

 PRODUCT NAME    : GLUTARALDEHYDE (SOL)
 CAS number      : 111-30-8
 UN number      :  
 Formula    : OHC(CH2)3CHO
 Odour      : ROTTEN APPLE LIKE
 Solubility in water       : COMPLETE
 Density         : 1.124 AT 20 oc
 Boiling point  : 188oc
 Melting point    :  -10oc
 Viscosity     :  
 Flashpoint    :  
 Explosive limits    :  
 Vapour pressure     : 1 mbar at 20oc
 Skin absorption/irritation          : YES
 TLV       Country  NL             Year  1995   : ppm                 0.25 Cmg/m3
 Pollution category    1994   : D

 

Images: Alt
stock-clearance.png