Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
| General | |
| Invent Hazard Material (IMO/EU) classification | C-49 |
| Physical properties | |
| Appearance | Brown |
| Density | [g/ml] 1,0 |
| Form | Liquid |
| pH | 8-9,5 |
Features:
Excellent in-depth cleaning properties
Contains specialized patented bacterial strains forming enzymes that break down fatty acid components of grease
Safe to use on all surfaces
Environmentally friendly.
SPECIFICATION FOR SILICA GEL INDICATING (BLUE) / NON INDICATING (WHITE):
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
We carry a complete line of condensate treatment chemicals. Condensate treatment chemicals are used to increase the condensate pH, thus reducing corrosion to the entire boiler steam system. The most common product is a tri-blend amine of cyclohexylamine, morpholine, and diethylaminoethanol (DEAE) neutralizing amines, although we do have standard RXSOL products or we can custom blend to your needs.
RXSOL-50-5005-DCM1 10% DEAE, 10% Cyclo, 10% Morpholine
RXSOL-50-5005-DCM2 20% DEAE, 20% Cyclo, 20% Morpholine
RXSOL-50-5005-C 20% Cyclohexylamine
RXSOL-50-5005-D 20% DEAE
RXSOL-50-5005-M 20% Morpholine
RXSOL-50-5005-C5 50% Cyclohexylamine
RXSOL-50-5005-D 50% DEAE
RXSOL-50-5005-M5 50% Morpholine
RXSOL-50-5005-025 alkaline and the vapors are irritating to eyes and lungs. Avoid contact with eyes and skin. Do not take internally. Observe safety regulations wear Goggles, PVC gloves and Apron when handling Provide ample ventilation Avoid contact with skin in case of contacts wash with cupious amount of water immediately. If eyes are splashed give immediate and prolonged irrigation with clean running water and obtain medical attention.
Not for internal use :-
If swallowed do not induce vomiting give plenty of water or milk and call a doctor immediately.
Packing. GENERAL REMARKS:-Do not store RXSOL-50-5005-025 near a heating equipment.
Drain cleaner specialized for accommodation drains and galley drains.
Rust convertor RXSOL-18-1011-025 is polymeric reaction based material, After reaction with rusted particle gives inert atmosphere by leaving polymeric pricipitate on metal surface.
| Appearance | Clear Colourless Liquid | |
| Density | g/cm3 at 20°C 1.05 | |
| Solubility | Water soluble | |
| Drying Time | 1-2 HOURS | |
| Coverage | 18-25 Sq. M/ Lts | |
| Packaging | Order No.: RXSOL- 18 - 1011 |
Size (in Ltrs) 25 Ltrs |
Personal Protection:
| Occupational Exposure Limits | This product does not contain any ingredients,which has an established exposure limit. |
| Respiratory Protection | Not normally needed |
| Hand Protection | PVC Acid proof gloves. |
| Eye Protection | Chemicals splash goggles. |
| General Remarks | |
| Materials to Avoids | Acids, Alkalis, Organic materials, Reducing agents & Strong Oxidizing agents |
**Read the Material Safety Data Sheet before using this product**
PROPERTIES
Pet Coke Remover is a concentrated liquid solution containing powerful surface active agents, a corrosion inhibitor and aqueous chemical agents.
Appearance / Color : Clear, light yellow liquid.
Specific gravity : 1.1–1.2 gr/cm3 at 20°C
pH : 11.5–12.5
Pet Coke STAIN removal concept -
Coal and petcoke leaves stain, its removal is important task during hold cleaning operation. Our expert has 2 suggestion for removal of such stain from the surface.
1st one to use RX Tuff heavy-duty alkaline cleaner, which can apply as an emulsion, need time to take effect and are rinsed away with seawater. More than one application will be needed to remove stubborn stains.
2nd one solution is much more effective than 1st one step. Here our expert suggests using New ORG on the spotted area where the residue is tightly deposited on the surface. " New ORG -RXSOL-20-2020-025 " this product is specialized to react with oily residue where any alkaline cleaner fails to emulsify. Uses of New ORG chemicals for stain removal/cleaning principally dissolve and emulsify OIL RESIDUE stain completely which is resulting stain-free surface, Then without flushing with water follow 1st step.
TECHNICAL DATA:
| pH (as is) | 11.5 – 12.0 |
| Density (20°C) | 1.028 g/cc |
| Colour | Fluorescent yellow |
| Fragrance | Lemon scent |
| Biodegradability | Complete |
| Freezing Stability | Stable |
|
Degradability determined in accordance with OECD no. 301D. |
- |
Analysis Report
| Test | Specification | Result |
| Appearance | Clear Liquid | Colorless to hazy aqueous solution |
| Odor: | Characteristic. | Chlorine-like |
| Flammability | Non-flammable | |
| Chemical formula | HOCl | HOCL |
| Chloride (Cl),ppm | 150 ppm MAXIMUM | 20 ppm |
| Color, (APHA) | Less than 30 APHA | Less than 30 APHA |
| Iron (Fe), ppm | 10 ppm MAXIMUM | 2 ppm |
| Molar mass | 52.46 g/mol | 52.46 g/mol |
| Density | Variable | 1.201 to 1.265 G/CC |
| pH | 6.0-6.5, friendly to your skin. | |
| Solubility in water | Soluble | Soluble |
| Acidity (pKa) | 7.53 | |
| Boiling Point: | Decomposition temperature | 40°C |
| Conjugate base | Hypochlorite |
| Molecular weight of HOCl | 52.457 g/mol |
| No. of hydrogen bond acceptor | 1 |
| Monoisotopic mass of Hypochlorous Acid | 51.972 g/mol |
| No. of hydrogen bond donor | 1 |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
