Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
Physical State | : | Liquid |
Solubility in Water | : | Insoluble |
Boiling Point | : | >190°F |
Flash Point, COC | : | 190°F |
Total Chlorine/Chloride, wt% | : | 0.00/0.00ppm |
Appearance and Odor | : | Opaque/Chemical |
Specific Gravity | : | 0.82 |
VOC Content (ASTM D2369) | : | 58% |
pH Concentrate | : | NA |
Total Sulfur, wt% | : |
0.00 |
Nitrite , Mercaptobenzothiazole (MBT),Metasilicate as a Aluminium protector , Borate
Corrosion Inhibitor for metal RUST Prevantive is a “natural” for the bearing industry. Finished bearings can be dipped in Corrosion Inhibitor for metal RUST Prevantive to displace water-based metalworking fluids and provide corrosion protection of the highly finished parts during wrapped shipment. It can also be used for automotive parts and other precision and semi-precision parts.
Typical Physical Properties:
Colour | - | Red |
Kinematic Viscosity at | 40ºC | 13 cSt |
- | 20ºC | 24 cSt |
- | 4ºC | 46 cSt |
Pour Point | -40ºC | |
Specific Gravity at 15.6ºC | 1.071 | |
pH Value | 9.5 | |
Flash Point | None |
Compatibility with Seals:
STACK SOL GUARD is generally compatible with natural rubber and pure synthetic rubber packings and seals such as Butyl, Viton, Neoprene, Nylon and Silicone.
Houghton plc also provides a wide range of external corrosion preventives for oilfield tubulars in storage or transit - Rust Veto grades. Details are available on request.
Storage:
STACK SOL GUARD should be stored in dry conditions. Tops should be replaced on all containers when not in use. All drums, tanks and containers should be clearly marked with the contents and should be used in delivery rotation.
STACK SOL GUARD also acts as an efficient anti-freeze, providing storage protection below -35ºC without circulation or drainage problems resulting from ice crystals formation.
Benefits:
1) Ease of application.
2) No system flushing required after storage.
3) Long Term protection against corrosion.
4) Vapour phase inhibition.
5) Long term resistance to bacteria, fungus and yeast.
6) Biodegradable.
7) Sea water compatible.
8) Low temperature storage.
9) Low viscosity - low pour point.
10) Compatible with water glycol subsea control fluids.
Physical appearance | Clear free flowing brown colour homogeneous liquid |
Specific Gravity @ 25° C | 0.92 ± 0.02 |
Viscosity @ 25° C | < 30 cps [cst] |
Pour Point | < 0° C |
ph range | 5.0 – 8.0 |
Solubility in Hydrocarbons | Soluble |
Solubility in water | Insoluble |
Flash point ° C | >60° C |
Shelf Life | Minimum two years |
Packing |
25 Ltrs. |
Storage and Handling :
RXSOL DEMULSIFIER shall be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be handled with dry absorbent like sand, sawdust, etc. On ingestion / eye contact with the product, medical attention should be sought immediately.
STRUCTURE :
HEAD - Molecule have a long chain non polar Hydrocarbon, whose structure can be Studied as follows:-
Head : It is water soluble & ‘-‘Vely charged.
Tail : It is oil soluble.
CLEANSING ACTION
When solution water is poured over the DIRTY surface the hydrocarbon Tail of the each molecules peg in to it, while the (–ve) HEAD is held in water. The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling and stirring. Each grease globule thus separated in PIN CUSHIONED by hydrocarbon TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.