Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Appearance – Transparent Liquid
Sp. Gr. At 25 C - 1.15 to 1.2
PH Value - 2.0 to 2.5
Water Compatibility - Should be water compatible.
Stickness – Non Sticky & Free flowing
PRODUCT PROPERTIES :
APPEARANCE | Clear liquid | |
DENSITY | g/cm3 at 15°C: 1.2 | |
pH | 10% solution 1.5-2.5 | |
COMPATIBILITY | ||
METAL | Concentrate and long touch may corrode. | |
RUBBER | No known effect | |
PACKAGING | Order No. RXSOL-13-1096-020 | Size (in litres) 25 , 35 , 210 |
PRODUCT PROPERTIES :
APPEARANCE | Clear Yellowish liquid | |
DENSITY | g/cm3 at 15°C: 1.2 | |
pH | 10% solution 1.5-2.5 | |
COMPATIBILITY | ||
METAL | Concentrate and long touch may corrode. | |
RUBBER | No known effect | |
PACKAGING | Order No. RXSOL-20-1011-210 | Size (in litres) 25 , 35 , 210 |
First Aid
IF SWALLOWED – Give 1 or 2 glasses of water and call for medical assistance immediately.
EYE CONTACT - Wash with plenty of water for at least 15 minutes; Get medical attention promptly.
Technical Information
Appearance: Clear Viscous Liquid | Solubility: 100% | |
Density: 8.67Lbs./Gal. | pH Level: 1 | |
Odor: Mild | Rinsing: Complete | |
Flash Point: None | Stability: Stable | |
Foaming: Moderate |
Procedure to remove rust from metal using Rust Stain Remover SAFE JELLY
Clean rusty surface by Hard / Metal brush, If Possible.
Use protective gloves, long sleeves, pants and safety glasses before opening the can of Rust Stain Remover SAFE JELLY.
Apply the viscous jelly to the rusty surface by paintbrush until the entire object is coated with the jelly. Then keep Rust Stain Remover SAFE JELLY to react with rust for 10 - 20 Minutes time.
Again use hard brush / steel wool on rusted areas to remove the rust. The rust will easily come off as you scrub. If the rust does not come off easily, allow the Rust Stain Remover SAFE JELLY to sit for five additional minutes.
Finally rinse or flush the entire rusted area with tap water.
Then to protect from further rusting neutralize the surface by use of RXSOL Alkaline Passivator RXSOL-19-1521-050 onto the surface of the metal object until it is coated.
Scrub the surface of the object with a scrub brush and rinse with water from a garden hose. The RXSOL-19-1521-050 neutralizes the acid and stops it from continuing to act on the metal. Allow the metal object to air dry.