Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
|
|
|
|
pH : |
13 |
|
Phys. properties : |
Clear to yellowish liquid |
|
Spec. gravity: |
1.2 |
|
Cold stability : |
-8°C |
|
Foam formation : |
slightly foaming product |
|
Solubility in H2O : |
good in any concentration |
Safety Aspects

Properties:
Specific gravity (at 20°C) : 1.05
Flash point (10%) : Non Flammable
pH (10%) : 12.0 - 12.5
Colour : Clear
Odour : Citrus
Spray
Brush
Soak
Circulation or high-pressure wash systems

Highly effective concentrated cleaner .
Versatile, can be used for a wide application range ( for TANK or general cleaning .)
Provides quick and thorough emulsifying action.
Can be used for cleaning , gas freeing of double bottom, deep and other fuel oil bunker tanks.
May also be used for cleaning and gas-freeing of crude and refined mineral oil cargo tanks.
It can be used as a general purpose cleaner to remove oil and grease deposits and cleaning of bilge spaces and engine rooms from soiled surfaces. Can be used for degreasing and cleaning engine cooling water systems

SODIUM HYPOCHLORITE
ACTIVE INGREDIENT:
Sodium Hypochlorite as Chlorine : 15%
Sodium Hydroxide : 1%
INERT INGREDIENTS: : 84%
Total 100%
HANDLING AND STORAGE PRECAUTIONS:
Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.
DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.
PRODUCT DISPOSAL: Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

CERTIFICATEOFANALYSIS POTASSIUM HYDROXIDE BATCH NO: 212
Sr. No Characteristic Unit Specification Results
1 Appearance White White
2 Alkalinity (as KOH) % wt 90.0Min 90.35
3 Carbonate (as K2co3) %wt 0.75Max 0.34
4 Iron (as Fe) ppm
5 Max 1.29 Chloride (as KCl) ppm 100 Max 80
6 Silicate (as SiO2) ppm 10 Max 3.4
7 Sodium (as Na) %wt 0.6Max 0.42
8 Calcium (as Ca) ppm 1 Max Nil
9 Nickel (as Ni) ppm 5Max 1.91
10 Sulphate (as K2SO4) ppm 200 Max 38
11 Nitrate (as NaNO3) %wt 0.2Max 0.1
12 Heavy Metals (as Pb) ppm 10 Max < 5 POTASSIUM HYDROXIDE 30%SOLUTION
Physical properties: Clear straw colour Specific gravity: 1.28-1.30 (at 25' C) Total alkalinity: 29-32%

|
|
13 |
.Avoid contact with eyes
· Avoid contact with skin
· In case of irritation rinse with plenty of water

Product Properties
|
Colour |
|
Clear Light Brown Liquid |
|
Density |
|
In g/cm3 at 15°C: 0.99 |
|
Flash Point |
|
(PMCC)°C: Above 70 |
|
Comtibility |
|
When mixed with Water, a clear Emulsion is Formed. |
|
Metal |
|
No known effect |
|
Rubber |
|
May swell |
|
Sythetic Rubber |
|
May swell |

Buffer Cleaner PRODUCT CHARACTERISTICS:
1. Appearance : Clear Liquid
2. Specific gravity: 1.0
3. Flash Point : None
4. pH-value at 20 C : 5.5
Recommended DOSAGE
Spraying 10 % in freshwater
Recirculation 10 % in freshwater
The ordinary cleaning method with a synthetic soap takes a long time and is insufficient in removing the described contaminants. A week acid solution in combination with synthetic soap gives a much better cleaning result.
BUFFER CLEAN is used as a final cleaning procedure when the cargo tanks have to be completely free of lead, chlorides, sulphides or MTBE prior to loading of special high purity cargoes.

Product : D I Water. Tech Grade
|
Mol. Formula |
H2O |
|
M.W |
18.015 |
|
Conductivity |
< 2.0 μ S/CM |
|
PH |
6.00 – 7.50 |
|
Total Hardness |
< 0.2 mg/l as CaCo3 |
|
Chloride |
< 0.1 mg/l as Cl |
|
Total Alkalinity |
< 0.1 mg/l as CaCo3 |
|
Iron |
< 0.02 mg/l as Fe |
|
Copper |
< 0.03 mg/l as Cu |
|
Nickel |
< 0.01 mg/l as Ni |
|
Oxygen |
< 0.01 mg/as O2 |
|
Silica |
< 0.005 mg/l as SiO2 |
|
Substances reducing permanganate |
0.00004 |
A wide tolerance for the reaction is allowed because of the readiness with which water absorbs carbon dioxide from the air. Also complies withBS 3978 : 1987

