Potassium Persulfate

Size:

Color:

Product Short Description: Potassium persulfate is a white, finely crystalline, odourless salt consisting of
Product Technical Specification:

 

Appearance                                                                   White, finely crystalline salt
KPS (PPS) content (typically)            99.0 % w/w
Active oxygen (typically) 5.9 % w/w
Acid content (based on H2SO4,typically) 0.05 %
Iron content (typically)  1 mg/kg
Bulk density (typically) 1100 g/l
Melting point Decomposition At above 65 °C
Solubility in water at 10/20/40/60°C 30/50/105/210 g/l
pH of a 1% solution in water (typically) 3.7
pH of a 10% solution in water (typically) 3.1
Recommended storage temperature Below 30 °C
Moisture content (typically)%  < 0.03
Molecular Weight 270.3 kg/kmol

Specific Gravity 

2,480 kg/m³

 

Remarks:
Images: Alt



Sodium Chlorate NOT FOR SALE

Size:

Color:

Product Short Description: Sodium Chlorate is used in Paper Industries for permanent whiteness to paper.
Product Technical Specification:
 

Properties

Technicals Grade

Pure Grade

Appearance

Light Yellowish Crystals

White Crystals

Purity as Naclo3

98% + (-) 1%

More than 99.4%

Nacl content 0.5% Max. Less than 0.1%
Moisture 1-1.5% Max. Less than 0.2%
Water Insoluble 0.2 % Max. Less than 0.05%
Whiteness (APHA) --------- Less than 17
Remarks:
Images: Alt



Sodium Hypo Chlorite (12-15%) 40 Kg

Size:

Color:

Product Short Description: Sodium hypochlorite is the salt formed by a negatively charged hypochlorite ion (OCl-) and a positively charged sodium ion (Na+). Pure hypochlorite is highly reactive and unstable
Product Technical Specification:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters Specification Range Typical

Sodium Hypochlorite

as NaOCl (%wt)

12.5 - 13.2 13.0
Available Chlorine (%wt) 11.9 - 12.6 12.4
Available Chlorine (%vol) 14.3 - 15.3 15.0
Available Chlorine grams/liter 143 - 153 150
Excess Caustic (%wt) 0.25 - 0.80 0.30
Specific Gravity @ 60°F 1.197 - 1.220 1.210
pH 12.0 - 13.0 12.50
Iron (Fe) ppm <0.5 0.05
Nickel (Ni) ppm <0.2 0.02
Copper (Cu) ppm <0.2 0.05
Mercury (Hg) ppb 0.001 - 0.003 0.002
Sodium Chloride (NaCl)% <15.0 12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

Remarks:

EMERGENCY AND FIRST AID PROCEDURES

EYE:

OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.

SKIN:

SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.

INIIALATION:

Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION:

           NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of  carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material

Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



ANISOLE

Size:

Color:

Product Short Description: ANISOLE
Product Technical Specification:
ANISOLE
Test Results

Appearance

 
Colourless liquid with a pleasent odour
Melting Point
 
Boiling Point
154ºC
Vapour density
3.7 (air = 1)
Vapour pressure
10 mm/Hg at 42ºC
Density (g cm³)
0.995
Flash point
51ºC
Explosion limits
 
Autoignition temperature
475ºC
Water solubility
negligible
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



TPOL Heavy Duty 10 Ltr

Size:

Color:

Product Short Description: multi - prupose heavy duty cleaing soap solution used as a common dirt remover in residential, commercial and industrial cleaning processes.
Product Technical Specification:
Remarks:
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



UNIFORM Tshirts CAP

Size:

Color:

Product Short Description: UNIFORM Tshirts CAP
Images: Alt
Get MSDS
Get Technical Bulletin
Connect On Whats App



Cotton Towel (100% White)

Size:

Color:

Product Short Description: Cotton Towel (100% White)
Product Technical Specification:
Remarks:
Images: Alt
stock-clearance.png