Categories: Lab Equipment-61
Images: Alt
Product Short Description: More effective then ORDINARY alumina. Also refer new tec grade if ur requirement to absorb poisonous gases RXSOL-24-1905-025
Product Description:

Activated alumina is highly porous material, this material can have a surface area significantly over 200 square metres/g. Very suitable for use as a filter of fluoride, arsenic and selenium in drinking water

Product Application:

Activated Alumina Desiccants:

Activated Alumina Desiccants is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated Alumina Desiccants  will not soften or disintegrate easily when immersed in water.

Dew points to -40°F and lower may be achieved with Activated Alumina Desiccants  depending on dryer design and operating conditions.

The 1/8” (2-5mm) bead is the size most frequently used in regenerative dryers.

The 3/16” (4-8mm) bead is used when pressure drop and surface area requirements fall between 1/8” and 1/4” material.  It is suitable for most systems.

The 1/4” (5-10mm) bead Activated Alumina Desiccants  is used both as a pre-bed material to support large desiccant beds or as a buffer for silica gel beads. Pressure drop is slightly lower than 1/8” (25mm) material. 

If size is not known or specified, the 1/8” (2-5mm) size is usually satisfactory. However, if Activated Alumina Desiccants is used in a regenerative dryer and the desiccant retaining screens cannot be measured, the 1/4” (5-10mm) size should be used as a bed support (6” layer). If at all possible, obtain a sample and measure it  before ordering.

Product Benefits:

  1. High adsorption capacity. With high surface area and excellent pore distribution, Activated Alumina Desiccants  has a high water adsorption capacity. This reduces initial cost, energy consumption and operating costs through smaller bed sizes and/or longer operating cycles.
  2. Low abrasion. Insures less dusting during tower depressurization or loading. Low abrasion means low pressure drop and a reduced chance of plugging the afterfilter.
  3. Resists liquid water. Water slugging due to upstream failure of aftercooler, separators or drain traps will not fracture the alumina beads. The adsorption capacity of the desiccant can be restored after complete regeneration.
  4. High crush strength. High crush strength, which limits dusting, is important during loading of desiccant towers. High crush strength makes alumina effective as a prebed material when used with other types of desiccants.
  5. Uniform bead sizes. Activated Alumina Desiccants is a uniformly sized bead. It provides low pressure drop to minimize channeling and ensures utilization of the full bed column section.

Physical Properties:

  1/8” (2-5mm) 3/16”(4-8mm) 1/4” (5-10mm)
Color and form  White  bead  White  bead  White  bead
 Bulk density  48 lbs/Ft3  48 lbs/Ft3  48 lbs/Ft3
 Crush strength  17-30 lbs 145-60 lbs 50-70 lbs
 Surface area  1.74 x 106 sq ft/lb  1.65 x 106 sq ft/lb  1.59 x 106 sq ft/lb
 Static adsorption
 Humidity
 		             -            -              -
100% RH
90% RH
60% RH
10% RH		 42.0%
37.5%
21.0%
7.5%		 40.0%
35.0%
21.0%
7.0%		 36.0%
32.0%
17.5%
6.0%
 


 

Product Dose:

Drier Chemicals manufacturer, importer and exporter of industrial chemicals and desiccants such as silica gel, activated alumina, activated carbon and carbon molecular sieves etc. Click on this link to get Most powerful GAS  absorber.

Product Note:

Also refer more details of Impregnated Activated Alumina with potassium permagnate KMNO4.

Potassium Permanganate Impregnated Alumina has strong oxidizing property with Potassium Permanganate (KMnO4), it has good efficienty in removing Hydrogen Sulfide(H2S) , Chlorine(Cl2), Formaldehyde(HCHO), Nitric Oxide (NO) & Sulfur Dioxide(SO2) from air.

Product Technical Specification:

CAS no Activated Alumina : 1344-28-1
 

Technical Parameter:

GRADE (Instrument - Air Drying Grade)
From Beads
Size (mm or mic) 5-8 / 3-5
Bulk density (gm/lit) 0.75-0.85
Surface area (m2 / gm) 345-415
Pore Volume (cc/gm) 0.40-0.50
Adsorption Capacity (60 % RH) 21.5
Attrition Loss (%) 0.2
Chemical Composition (%)  
Na2O NA
Fe2O NA
SiO2 NA
TiO2 NA
Promoter NA
LOI (300C-1000C) 6-8
Al2O3 (By difference) 92 min



 

Remarks:

Activated Alumina compound is used as a desiccant for dry and absorbing moisture water from the air and as a filter of fluoride, arsenic and selenium in drinking water.

prod_useful_area:
Product Supply Location:

Activated Alumina Desiccants manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Activated Alumina Desiccants at a competitive price from us. We have ready stock of Activated Alumina Desiccants in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

stock-clearance.png