Categories: Metal Treatment-68
Images: Alt
Product Short Description: Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as efficient heat transfer.
Product Description:
Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as efficient heat transfer. Heat Transfer Salt with the increased use of high-temperature operations, the chemical and petroleum process industries need an economical, efficient, heat transfer medium
Product Application:
Heat Transfer Salt kept in between steam and direct-fire heating.  Heat Transfer salt has low melting point  to create a molten salt bath also have high heat transfer rate and its proprietory blend of heat transfer salt is stable at high temperatures, and is non-corrosive to steel.  The salts are used for indirect heating and cooling or as quenching baths in the annealing of iron and steel.
Product Dose:
Heat Transfer Salt with the increased use of high-temperature operations, the chemical and petroleum process industries need an economical, efficient, heat transfer medium that is between steam and direct-fire heating.  Sodium nitrite can be mixed with nitrate salts to create a molten salt bath.  It has a low melting point, high heat transfer rate, is stable at high temperatures, and is non-corrosive to steel.  The salts are used for indirect heating and cooling or as quenching baths in the annealing of iron and steel.
Product Note:
Now a days Uses of Molten Salts as a Heat Transfer Fluid and Thermal-Storage Medium is common. One of the most commonly used molten salts is a eutectic blend of sodium nitrate and potassium nitrate. 


Heat Transfer salts contains Nitrate  are stable and have low toxicity, but they are oxidizers. In the presence of fire or open flames, they can break down and liberate oxygen, providing a fuel source for the flame. Molten nitrate salts should be kept away from open flame, sparks and other sources of ignition. If proper precautions are taken, the salts should not pose any hazards.
Product Technical Specification:

 

Main Ingredients   : Salt Mixture with Corrosion Inhibitor
Inhibitors and
water
 
6
Inhibitors
: 6 %
Colour Bright : Yellow
Nitrite Content : 7.5 to 8.5%
Chloride Content  0.10% Max.
pH of solution : 9.5 - 10.5
Odour            : PRACTICALLY ODOURLESS
Solubility in water        : SOLUBLE
Melting Point       : Max 150 - 155 °C
Working Temp Range : 155 – 540 Deg.C
Density @ 20 Deg.C : 1160 Kg/m3
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Hear Transfer Salt TR : 155
Skin absorption/irritation       : YES
TLV       Country     :  
Pollution category    1994       : III
 
Remarks:

Why use Heat Transfer molten salts?

Heat Transfer Salt extend the upper range of the temperature limits in which a liquid heat transfer media can be used.

prod_useful_area:
Heat Transfer Salt Molten salts are also used in applications of solar power plants (CSP), where the salt can store heat obtained from sunlight for long periods of time. Some of these CSP systems flow the salt directly through the receiver tubing, where sunlight hits a parabolic mirror and concentrates the sunlight to a tube in which the salt flows. 
 
Other systems may use molten salts for preheating natural gas lines or keeping reactors hot by using the molten salt in the jacket around a tank. Salts also have relatively high latent heat capacity — similar to many of the phase-change waxes that are used today — and are sometimes used in phase-change applications. When salts melt, they absorb large amounts of heat, and when they freeze, they release large amounts of heat. By utilizing this phenomenon, it is possible to create advanced thermal storage or temperature-regulating systems, depending on the process.
Product Supply Location:

Molten Salt manufacturer and supplier in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Barka - Oman, Muscat, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Oman Muscat Barka, Canada, Nairobi Kenya, Uganda Africa, Bahrain

stock-clearance.png