Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Specific Gravity at 30 °C g/ml 1.020 1.150 1.100
Distillation Limits %
0 -235 °C 20 8
0-300 °C 30 60 50
0-355 °C 65 78
Water Extractable Phenol %m/m 3 0.05
Toluene Insoluble %m/m 1 0.38
Moisture % % 1.5 0.5
Crystallizing Temperature °C 20 2
Liquidity after heating up to 38 °C °C Completely Liquid Completely Liquid
and keeping at 32 °C for 2 hours
Flash Point °C 66 86
Naphthalene Content % 10 <2
Recommended for Telegraph and electricity treansmission poles , fencing and structural tombers.
| PRODUCT NAME | : | ETHYLENE GLYCOL, Di-ethylene glycol(Ethane 1-2 Diol) |
| CAS number | : | 107-21-1 |
| Form Phase | : | Liquid |
| Colour | : | clear |
| Formula | : | CH2OHCH2OH |
| Odour | : | ODOURLESS |
| Solubility in water | : | COMPLETE |
| Density | : | 1.11 at 20 oC |
| Boiling point | : | 197 oC |
| Melting point | : | -13 oC |
| Flash Point | : | Not Applicable |
| Ignition Temperature | : | 410 oC |
| Explosive limits | : | Product does not present an explosion hazard. |
| Vapour pressure | : | .07 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 10 ppm 26 mg/m3 |
| Pollution category 1994 | : |
D |
| Solubility in / Miscibility with water at 20°C | : | Fully miscible. g/l (Fully miscible.) |
| ISOPROPYL ALCOHOL (PURE) | ||
| Test | Test method | Results |
|
Appearance |
By eyes
|
Clear
|
|
Sp. Gr 20/20°C
|
ASTM D268
|
0.785 - 0.787
|
|
Purity weight
|
G. C.
|
99.8 min.
|
|
Water weight
|
ASTM D136
|
0.15 max.
|
|
Misciblity with water
|
ASTM D1720
|
Pass
|
|
Acidity as Acetic Acid
|
ASTM D1613
|
0.001 max.
|
|
Distillation (range)
|
ASTM D1078
|
82.4
|
|
Non-Volatile matter mg/100ml
|
ASTM d1353
|
2.0 max.
|
|
Colour Alpha
|
ASTM D1209
|
10 max.
|
|
Permanganate time at 25°C
|
ASTM D1363
|
Over 30 min.
|
| PRODUCT NAME | : | ISOPROPYLALCOHOL |
| CAS number | : | 67-63-0 |
| UN number | : | 1219 |
| Formula | : | (CH3)2CHOH |
| Odour | : | SHARP, SOMEWHAT UN PLEASANT |
| Solubility in water | : | COMPLETE |
| Density | : | 0.783 at 20 oC |
| Boiling point | : | 82 oC |
| Melting point | : | -90 oC |
| Viscosity | : | 2.86 cp at 15 oC |
| Flashpoint | : | 7 oC |
| Explosive limits | : | 2 – 12 Vol% |
| Vapour pressure | : | 44 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 400 S ppm 980 S mg/m3 |
| Pollution category 1994 | : |
III |
|
PRODUCT SPECIFICATION SHEET |
||
|---|---|---|
|
Muriatic ACID |
||
|
Parameters |
Specification Range |
Typical |
|
% Active Content |
31.45 – 32.5 |
32.0 |
|
Specific gravity @ 60°F |
1.160 – 1.166 |
1.162 |
|
Degree Baumē (Bē) |
20.0 – 20.6 |
20.4 |
|
Iron (ppm) |
0.5 – 1.0 |
< 0.5 |
|
Color (APHA) |
5 - 20 |
< 5 |
|
Total organic compound (ppm) |
2 – 5 |
< 2.5 |
|
Oxidizing substance (as cl2 ppm) |
0 – 30 |
< 5 |
|
Freezing Point |
-49°F |
|
Muriatic acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with Muriatic acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.
RXSOL Gypsum remover, Dissolves large quantities of gypsum lasts longer and save time and man power.
Specifications of LABSA-Na
Active matter 96 Min
Colour Kllet 90 Max
Unsulfonatet matter % 2.5 Max
Sulfic acid, % 1.2 Max
Water % 1.0 Max
Density at 20 "C gr/ml 0.856 - 0.868
Organic chlorine ppm < 5
Acidity as (H2SO4) ppm < 1
Distillation range "C I.B.P 275 - F.B.P. 315
Bromine index mgr Br/100 gr 0.02 max
Awerage Moleculer Mass 344.5
Parafine 0.2 max
Carbon distribution C 10 % < 0.5
C 10 % < 16
C 10+11% < 55
C 12 % < 25
C 13 % < 16
C 13 % > 3
Water % < 0.02
Total 2 phenyl - isomers % 24 - 30
Total LAB % 98 min
Non LAB % 2 max
Sülfonatable content % 98 min
Average Molecular Weight 3 1+/-4 : 2
Benzene sulfonic acid LABSA Linear alkylbenzene sulfonic acid (LABSA) LAS; LABSA; Laurylbenze .
LABSA Feature
Product Remarks: Brown Viscous Liquid
Poduct Category: Cleaning Raw Materials
Product Description: Name: LABSA 96%
Chemical Formula: R -C6H4-SO3H
Appearance : Brown viscous liquid
|
|
|
|
Properties |
|
|
Molecular formula |
HCl in water (H2O) |
|
Molar mass |
36.46 g/mol (HCl) |
|
Appearance |
Clear colorless to light-yellow liquid |
|
Melting point |
−26°C (247 K) 38% solution |
|
Boiling point |
110 °C (383 K), 20.2% solution; |
|
Solubility in water |
Miscible |
|
Acidity (pKa) |
−8.0 |
|
Viscosity |
1.9 mPa s at 25° C, |
|
Flash point |
Non-flammable |
Safety
Hydrochloric acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with hydrochloric acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.
Feric Chloride contains chlorine, so its characteristic smell is chlorine like hydrochloric acid odor. Due to presence of chlorine Ferric Chloride is Highly corrosive to most metals.
Specification-
Ferric Chloride CAS NO.7705-08-0
SYSTEMATIC NAME :Ferric chloride
OTHER NAME :Iron(III) chloride, Iron tri chloride, Ferric trichloridde Anhydrous
EMPIRICAL FORMULA :FeCl3
MOLECULAR WT :162.2 g/mol
APPEARANCE :Dark greenish Black, Crystalline Powder extremely hygroscopic
SPECIFICATION :Ferric Chloride (as Fecl3) : 98.00 % min
Matter Insoluble in water :0.50 % max
Free Chlorine (as Cl) :0.01 % max
Ferrous Salts (as Fecls2) :0.10 % max
Sulphates (as SO4) :0.30 % max
Nitrates (as NO3) :0.05 % max
Zinc ( as Zn) :0.01 % max
Arsenic (as As203) :0.0005 % max
Alkalis and Alkaline earths :0.30 % max
Ferric Chloride is Noncombustible materials so esy to transport and storage.
|
Spec Item |
35%H2O2 |
50%H2O2 |
60%H2O2 |
|
pH |
1.20~2.50 |
1.20~2.50 |
1.20~2.50 |
|
Purity wt% |
35~36 |
50~51 |
58~60 |
|
Specific Gravity 20/4℃ |
1.130min |
1.19min |
1.195min |
|
Free Acid as h2so4 wt% |
0.05max |
0.05max |
0.05max |
|
Residual wt% |
0.20max |
0.20max |
0.20max |
|
Stability % |
97.0min |
97.0min |
97.0min |
Keep locked up.. Keep container dry. Keep away from heat. Keep away from sources of ignition. Keep away from combustible material.. Do not ingest. Do not breathe gas/fumes/ vapor/spray. Never add water to this product. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents, reducing agents, combustible materials, organic materials, metals, acids, alkalis
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
