RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Construction Chem

Sodium Naphthalene Formaldehyde

Sodium Naphthalene Sulfonate Formaldehyde Condensate SNF is Water Reducing Superplasticize in brown or dark brown powder
Part number
RXSOL-67-6704-025
Brand
RXSOL
RXSOL

Overview

Sodium Naphthalene Sulfonate Formaldehyde Condensate SNF is Water Reducing Superplasticize in brown or dark brown powder, usually used as superplasticizer admixture for the construction industry, also used primarily as dispersants in a wide variety like filler, leather tanning agent, building cement concrete water reducing agent, oil well cement water reducing agent.

Technical specifications

Model item
SNF-5%
SNF-10%
 
SNF-20%
 
Net starch fluidity (mm )
≥ 230
 
≥ 220
 
> 210
 
Content of cl -- (%)
< 0.3
< 0.4
 
< 05
 
pH value
7 ~ 9
7 - 9
 
7 ~ 9
 
Surface tension(N/m)
(71 ± 1) × 10 -3
(7 1 + 1) * 10 -3
 
(71 ± 1) × 10 -3
 
Solids content(%)
≥ 91
> 91
 
≥ 91
 
Na 2 SO 4 content(%)
< 5
< 5
< 19
 
Items  Time    Criteria Actual Results

Water Reduction %

 
/

≥ 14

 
16
Water Penetration %

≤ 90

85  
Air Content %

≤ 3.0

2.0  
Compression strength %
1h
≥ 140
160
3h

≥ 130

 
155  
7h
≥ 125
135  
28h
≥ 120
125  
Shrinkage %
28d
≤ 135
89

Applications

  • Water reducing agent (SNF)can reduce the water consumption without affecting the normal construction of cement concrete, In the hardening process of cement concrete, there is less water to be lost,so there are fewer internal air holes in the concrete, which increases the strength of the concrete.
  • The water-reducing agent(SNF) can improve the workability of cement concrete and reduce the energy consumption of construction mixing.
  • The water-reducing agent(SNF) can reduce the amount of cement and water without reducing the performance and mechanical index of cement concrete, thus reducing the construction cost.
  • Water-reducing agent(SNF) is no adverse effect on concrete shrinkage and no corrosion effect on steel reinforcement.

#SuperPlasticizer_ManufacturerSupplier
#SuperPlasticier_MuscatOman
#SuperPlasticizer_DubaiSharjahAbudhabiFujairah

Dosage and directions

Sodium Naphthalene Sulfonate Formaldehyde Condensate (SNF) Blending dosage at 0.5%-1.0%, 0.75% mixing dosage advised.

Characteristics and notes

 It provides good cohesive pump able mix at low W/C ratio & moderate cement contents
 Imparts extreme fluidity to the concrete, which facilitates rapid placement of concrete
 Helps in controlled & predictable retardation of setting with improved slump retention
 Useful in production of self compacting concrete
 Provides high and extended slump suitable for  Better slump retention.
 Improves workability and plasticity
 Compatible with all types of cement.
 Reduces water requirement,increases strength and produce durable and dense concrete
 Improves pumping and finishing characteristics
 Reduces segregation
 Applied in complicated formwork or with congested reinforcement
 Achieves good compaction without any excessive vibration
 Reduced permeability, segregation and bleeding
 helps in increasing compressive and flexural strength
 It is chloride -free
Helps to achieve pumping concrete.
Increases ultimate strength with maximum water reduction.
Controls set retardation with optimum dosage.
Economizes the mix reducing cement content.
 

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

Porduct Name               Super Plasticizer Admixture for Concrete
Part Number   RXSOL-67-6704-025

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Website www.rxmraine.com

Product name       Cas No                        EC No  Weight                        
TRIETHANOLAMINE (TEA)   102-71-6 203-049-8   1-5%
FORMALDEHYDE 50-00-0 200-001-8      0.5-1%
Proprietroy Blend Mixture with 2-Acrylamido-2-methylpropane sulfonic acid --- --- 75-81
Signal Word  Danger
Hazard Statements H315 Causes skin irritation. H350 May cause cancer
Precautionary statements   P264 Wash contaminated skin thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P332+P313 If skin irritation occurs: Get medical advice/ attention. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/ container in accordance with national regulations
Classification of  the substance    or  mixture No data available
Supplemental Hazard    Statements No data available
Other hazards  This product does not contain any substances classified as PBT or vPvB.

General advice Consult a physician for specific advice.
If inhaled Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing.
Eye Contact  Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing.
Swallowed Rinse mouth thoroughly with water. Do not induce vomiting.
Skin Contact   Rinse immediately with plenty of water. Get medical attention if symptoms are severe or persist after washing.
Inhalation No data available
Ingestion No data available
Most important  symptoms and effects,  both acute and delaye  The severity of the symptoms described will vary dependent on the concentration and the length of exposure. Inhalation May cause coughing and difficulties in breathing. Ingestion May cause discomfort. May cause stomach pain or vomiting. Skin contact Prolonged and frequent contact may cause redness and irritation. Eye contact Prolonged contact may cause redness and/or tearing.
Indication of any immediate medical        attention and special treatment needed  Treat symptomatically

Flammability                                                  No data available
Suitable extinguishing media  The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.
Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given. 
Special hazards arising from the substance or mixture  No data available
Further information Contaminated extinguishing water must be disposed of in accordance with official regulations.
Hazardous combustion
products
Does not decompose when used and stored as recommended.
Advice for firefighters No data available
Protective Equipment Use protective equipment appropriate for surrounding materials.
Specific Hazards Arising from the Chemical No data available

Personal precautions, protective equipment and emergency  procedures Avoid contact with skin and eyes. Wear eye and face protection.
Spillage No data available
Personal Protection No data available
Enviromental Precaution Avoid the spillage or runoff entering drains, sewers or watercourses.
Methods and materials for
containment and      cleaning
Absorb in vermiculite, dry sand or earth and place into containers. Label the containers containing waste and contaminated materials and remove from the area as soon as possible. Collect and dispose of spillage as indicated in Section 13.
Reference to other      sections    For personal protection, see Section 8. For waste disposal, see Section 13.

Advice on protection against    fire and    explosion No data available
Incompatible materials  No data available
Hygiene measures When using do not eat, drink or smoke. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.Exercise good industrial hygiene practice. Wash after handling, especially before eating, drinking or smoking. Remove contaminated clothing immediately.
Advice on safe handling  Avoid contact with skin, eyes and clothing. Wear protective clothing, gloves, eye and face protection. Wash contaminated skin thoroughly after handling.
Conditions for safe storage including any  incompatibilities 

No data available

Storage conditions Store in tightly-closed, original container in a dry, cool and well-ventilated place.
Storage class Chemical storage
Specific end use(s) The identified uses for this product are detailed in Section 1.2.
Advice on general  occupational  hygiene No data available
Exposure controls  Personal protective equipment 
Engineering Control Ensure that eyewash stations and safety showers are close to the workstation location
Eye/face protection Tight-fitting safety glasses.
Body Protection Nitrile gloves are recommended
Skin protection Wear appropriate clothing to prevent any possibility of skin contact.
Respiratory protection
No special protection required.
Other Protection  Measure No data available

Physical state Liquid
Colour Pale yellow
Odour No data available
Odor Threshold No data available
pH 6.8~7
Melting Point No data available 
Boiling Point >100 ̊ C
Flash Point No data available 
Evaporation Rate No data available
Flammability (solid, gas) No data available 
Explosive limits No data Available
Upper/lower flammability or explosive limits No data Available
Autoignition temperature No data available 
Decomposition temperature  No data available
Vapour pressure No data available 
Viscosity 300 ~ 600 cps (at 25 ℃)
Density No data Available
Relative Density 1.07
Specific Gravity No data available 
Partition coefficient No data available 
Explosive properties No data available 
Solubility Soluble in water
Ignition temperature No data available
Particle characteristics No data available 

Reactivity                        There are no known reactivity hazards associated with this product.
Chemical stability Stable at normal ambient temperatures.
Possibilityof hazardous  reactions Under normal conditions of storage and use, no hazardous reactions will occur
Conditions to  avoid There are no known conditions that are likely to result in a hazardous situation
Incompatible materials
No data available
Hazardous decomposition products No data available

Acute toxicity  Acute toxicity - oral ATE oral (mg/kg) 20,000.0 Acute toxicity - dermal ATE dermal (mg/kg) 162,162.16 Acute toxicity - inhalation ATE inhalation (gases ppm) 378,378
Skin corrosion/irritation Prolonged and frequent contact may cause redness and irritation.
Serious eye      damage/irritation PProlonged contact may cause redness and/or tearing.
Respiratory or skin  sensitization  May cause coughing and difficulties in breathing.May cause discomfort if swallowed
Carcinogenicity No data available
Germ cell        mutagenicity  Assessment of mutagenicity: Based on the ingredients, there is no suspicion of a mutagenic effect
Reproductive toxicity  No data available
Specific target  organ  toxicity - single exposure  
No data available
Additional Information No data available

Persistence and      degradability Expected to be not readily biodegradable.
Toxicity to fish  LC₅₀, 96 hours: 41 mg/l, Brachydanio rerio (Zebra Fish)
Toxicity to daphnia and other  aquatic invertebrates EC₅₀, 24 hours: 42 mg/l, Daphnia magna
Toxicity No data available
Toxicity to bacteria   No data availalble
Toxicity to algae EC₅₀, 72 hours: 3,48 - 4,89 mg/l, Algae
Bioaccumulation  potential No data availalble
Results of PBT and vPvB  assessment No data availalble
Endocrine disrupting properties  No data availalble
Other adverse effects No data availalble

General information The generation of waste should be minimised or avoided wherever possible.
Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Waste treatment  Method No data available

UN number ADR/RID: IMDG:

IATA:

UN proper  shipping  name  ADR/RID:Not dengerous goods IMDG:Not dengerous goods IATA:Not dengerous goods
Transport hazard  class(es)               ADR/RID: IMDG:            IATA:
Packaging group ADR/RID:-                      IMDG:- IATA:-
Environmental hazards ADR/RID:No                                    IMDG:No                                IATA:No
Special precautions for  user    No data available                                 
Further information No data available    

Safety, health and environmental  regulations/legislation specific for   the  substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Other regulations No data available
Chemical Safety Assessment A Chemical Safety Assessment was not carried out for this substance.

Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Sodium Naphthalene Sulfonate Formaldehyde Condensate (SNF) Plasticizer Admixture for Concrete manufacturer and supplier in Fujairah, Sharjah, Ajman, Abudhabi, Dubai, Oman Muscat, Barka, Mumbai, Kandla Gandhidham, Kolkata, Chennai, Visakhapatnam, Canada, Sudan, Nairobi Kenya

Our stock points and branches