Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-12-4102-210
|
Appearance/Odour |
: Liquid Green / Yellow, Pleasant odour |
|
pH |
: 8.5 |
|
Boiling point/boiling range |
: 100 ºC |
|
Melting point |
: Not applicable. |
|
Flammability (solid, gas) |
: Not classified |
|
Explosive properties |
: Not classified |
|
Oxidising properties |
: Not classified |
|
Flash point |
: Not applicable. |
|
Relative density |
: 1 |
|
Water solubility |
: Complete |
|
Evaporation rate |
: No data available |
Product Code: RXSOL-20-2099-025
|
Property |
Typical Value |
|---|---|
|
Chemical Name |
2-Butoxyethanol |
|
Common Name |
Butyl Glycol |
|
Synonyms |
Ethylene Glycol Monobutyl Ether, EGBE, Butyl Cellosolve |
|
CAS Number |
111-76-2 |
|
Molecular Formula |
C₆H₁₄O₂ |
|
Molecular Weight |
118.17 g/mol |
|
Appearance |
Clear, colourless liquid |
|
Odour |
Mild, characteristic ether-like |
|
Purity |
Typically ≥99%, grade-dependent |
|
Specific Gravity at 20°C |
Approximately 0.90 |
|
Boiling Point |
Approximately 171°C |
|
Flash Point |
Approximately 60–67°C, depending on test method |
|
Freezing / Melting Point |
Approximately −75°C |
|
Solubility in Water |
Completely miscible |
|
Vapour Pressure at 20°C |
Approximately 0.8–1.0 hPa |
|
Refractive Index at 20°C |
Approximately 1.419 |
|
Chemical Family |
Glycol Ether |
|
Evaporation Rate |
Moderate to slow relative to common light solvents |
The above values are typical reference properties of 2-Butoxyethanol and are not batch-specific specifications. Final values must be confirmed from the applicable product TDS and COA.
Active solvent for solvent-based coatings.
Coalescent for industrial water-based coatings.
Coupling agent for architectural water-borne coatings.
Coupling agent and solvent in household and industrial cleaners, rust removers, hard surface cleaners, and disinfectants.
Primary solvent in solvent-based silk screen printing inks.
Coupling agent for resins and dyes in water-based printing inks.
Solvent for agricultural pesticides.
Very Effective and multi Tank Cleaning Active solvent for solvent-based coatings.
Coalescent for industrial water-based coatings.
Coupling agent for architectural water-borne coatings.
Coupling agent and solvent in household and industrial cleaners, rust removers, hard surface cleaners, and disinfectants.
Primary solvent in solvent-based silk screen printing inks.
Coupling agent for resins and dyes in water-based printing inks.
Solvent for agricultural pesticides.
Very Effective and multi Tank Cleaning
Butyl Glycol supplier in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam. We are supplying our customer as per there demand and purity of Butyl Glycol.
Product Code: RXSOL-12-8896-030
Form / Phase : Homogenious liquid
Specific Gravity: 1.052 at 20 °C (68°F) , g / cm3
Flash Point: NA
Freeze Point: 32°F
pH: 13–14 For Heavy Duty Grade and In general 9 - 10
Odor: slight/butyl
Storage: Store in the original packaging or in specially appropriate containers, protected from heat sources.
Product Code: RXSOL-12-1522-001
|
Property Description |
Specification |
|
Purity, % |
99.1 min |
|
Sulphate, % |
0.5 max |
|
Insoluble in water, % |
0.05 max |
|
P2O5 % |
24 min |
|
CO3 % |
0.40 max |
|
NaOH % |
2.87 max |
|
Arsenic, % |
0.005 max |
|
Iron % |
0.01 max |
|
Chloride,% |
0.7 max |
|
Fluoride, % |
0.003 max |
|
Methyl Orange |
16.5-19.0 |
Trisodium Phosphates is available in different forms and helps in softening the water and removes the soil content. Available in
Used for
Widely Used in
Product Code: RXSOL-19-1388-500
Product Code: RXSOL-12-4008-027
Product Code: RXSOL-19-3356-092
Soak stained laundry in a mixture of hot or warm water and sodium percarbonate (laundry booster) - 1 to 3 tbsp per litre for up to 24 hours. For a large load, add 4 tbsps. For a front loading washer, dissolve the powder in a little hot water and then add to the detergent water.
Product Code: RXSOL-12-1880-220
TECHNICAL SPECIFICATIONS :
| Appearance/nature | : Viscous flowable liquid |
| Colour | : Colourless to pale yellow |
| on APHA (20% aqueous solution), maximum | : Characteristic |
| Odour | : 500-234-8 |
| pH (1 % aqueous solution) | : 6.8-8.5 |
| Active Matter, % by mass minimum | : 68 |
| Molecular Weight | : 384 |
| Sulfate, % by mass as Na2SO4, maximum | : 1.5 |
| N.D.O.M.,% by mass(on 100% A.M.basis), max | : 3.0 |
| 1, 4 - Dioxane (on 100% A.M. basis), ppm, max | : 30 |
| Iron content as Fe, ppm, maximum | : 5 |
| Heavy metals as Pb, ppm, maximum | : 15 |
| Microbial count, TVC, cfu/ml | : < 10 |
Certificate of Analysis according to DIN 55350-18-4.2.2
| Sr.No | Characteristic / Method | Unit | Value | Lower Limit | Upper Limit |
| 1. | Appearance @25 °C 93000601 | Confirms | Transparent to yellowish Flowable Paste | ||
| 2. | Odour 93000701 | Confirms | Conform to STD | ||
| 3. | Active Ingredient (M.W.384) ISO 2271 | % | 69.2 | 69.00 | 70.00 |
| 4. | pH 3% Solution ISO 4316 | 7.2 | 7.00 | 9.00 | |
| 5. | Sodium Sulfate Method No. 920015-01 | % | 0.3 | 1.00 | |
| 6. | Unsulfated Matter Method No. 970064-02 | % | 2.4 | 2.80 | |
| 7. | Dioxane (as is) Method No 920021-01 | ppm | 21 | 30 | |
| 8. | Colour APHA (20% Sol. @25 °C) ISO 6271 | 16 | 25 | ||
| Packing / Production Date | |||||
| Expiry Date / Shelf Life | |||||
SLES is an anionic surfactant and classified under alkyl ether sulfates. It is obtained by combining a fatty alcohol such as coconut oil with ethylene oxide and subsequent sulfonation.
SLES is available in three forms:
Liquid SLES : Viscous Liquid
PASTE SLES : JELLY form
Powder SLES : Snow White
Product Code: RXSOL-12-8896-210
Form / Phase : Homogenious liquid
Specific Gravity: 1.052 at 20 °C (68°F) , g / cm3
Flash Point: NA
Freeze Point: 32°F
pH: 13–14 For Heavy Duty Grade and In general 9 - 10
Odor: slight/butyl
Storage: Store in the original packaging or in specially appropriate containers, protected from heat sources.
Product Code: RXSOL-12-8896-025
Form / Phase : Homogenious liquid
Specific Gravity: 1.052 at 20 °C (68°F) , g / cm3
Flash Point: NA
Freeze Point: 32°F
pH: 13–14 For Heavy Duty Grade and In general 9 - 10
Odor: slight/butyl
Storage: Store in the original packaging or in specially appropriate containers, protected from heat sources.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
