Paint Remover
- Part number
- RXSOL-18-1013-001
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Paint Remover and Paint Stripper RXSOL-18-1013-001 is a excellent product for removal of paint from tough painted surfaces. Useful in the maintenance of all types of Industrial and House Hold Paint and also in the marine industry.
Applications
To remover paint, varnish, lacquer, baked enamel, shellac, and epoxy from all metallic surfaces. Particularly useful in the shipping industry, workshop and garages.
Dosage and directions
Must be applied in its concentrated state. Quantity to be applied varies according to the degree of deposition on the surface.
Characteristics and notes
RXSOL-18-1013-25 is particularly used in aircraft industry because of its non-reactivity with aluminium, copper, brass their alloys.
PACKAGING : 25 Ltrs. COMMON NAME : Paint Remover
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Paint Remover |
| Part Number | RXSOL-18-1013-001 |
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | Cas No | EC No | Weight | Formula |
| Dichloromethane | 75-09-2 | 200-838-9 | 84,93 g/mol | CH2Cl2 |
| Proprietory Bled of Solvent with Pigment Emulsifier | --- | --- | --- | --- |
tatement(s)
| Signal Word | Danger | |
| Hazard Statements (s) | No Data available | |
| H315 | Causes skin irritation. | |
| H319 | Causes serious eye irritation | |
| H336 | May cause drowsiness or dizziness | |
| H351 | Suspected of causing cancer. | |
| Precautionary statement(s) | Toxic in contact with skin. | |
| P202 | Do not handle until all safety precautions have been read and understood. | |
| P261 | Avoid breathing mist or vapors. | |
| P264 | Wash skin thoroughly after handling | |
| P302 + P352 | IF ON SKIN: Wash with plenty of water | |
| P305 + P351 + P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. | |
| P308 + P313 | IF exposed or concerned: Get medical advice/ attention. | |
| Supplemental Hazard Statements | none. |
| General advice | Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air |
| Swallowed | After swallowing: immediately make victim drink water (two glasses at most). Consult a physician. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| Eye contac | After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses. |
| Ingestion | No data available |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | Carbon oxides Hydrogen chloride gas Combustible. Development of hazardous combustion gases or vapours possible in the event of fire. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
No data available |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. . |
| Protective Equipment | No data available |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Personal Protection | No data available |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. |
| Reference to other sections | For disposal see section 13. |
| Advice on safe handling | Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols |
| Incompatible materials | No data available |
| Hygiene measures | Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. |
| Conditions for safe storage, including any incompatibilities | Storage conditions Tightly closed. Dry. |
| Storage conditions | Tightly closed. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Heat sensitive. Handle and store under inert gas. |
| Storage class | Storage class (TRGS 510): 6.1D: Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | No data available |
| Exposure controls | Personal protective equipment |
| Engineering Control | Personal protective equipmen |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Body Protection | protective clothing. |
| Skin protection | TThis recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Viton® Minimum layer thickness: 0,7 mm Break through time: 120 min Material tested:Vitoject® (KCL 890 / Aldrich Z677698, Size M) |
| Respiratory protection |
Recommended Filter type: Filter AX (EN 371) The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Other Protection Measure | No Data available |
| Control of environmental exposure | Do not let product enter drains. |
| Physical state | liquid |
| Colour | colorless |
| Odour | ether-like |
| Odor Threshold | Not Applicable |
| pH | No data availabl |
| Melting Point | Melting point/range: -97 °C |
| Boiling Point | 39,8 - 40 °C |
| Flash Point | does not flash |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | Upper explosion limit: 22 %(V) Lower explosion limit: 13 %(V) |
| Autoignition temperature | 605 °C |
| Decomposition temperature | No data available |
| Vapour pressure | 584 hPa at 25 °C |
| Viscosity | Viscosity, kinematic: No data available Viscosity, dynamic: 0,42 mPa.s at 25 °C |
| Density | 1,325 g/mL at 25 °C |
| Relative Density | No data available |
| Specific Gravity | No data available |
| Partition coefficient | log Pow: 1,25 at 20 °C - Bioaccumulation is not expected |
| Explosive properties | No data available |
| Solubility | No data available |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |
| Reactivity | No data available |
| Chemical stability | Sensitivity to light The product is chemically stable under standard ambient conditions (room temperature) . Contains the following stabilizer(s): 2-methyl-2-butene (>0,005 - <0,015 %) |
| Possibility of hazardous reactions | Risk of explosion with: Alkali metals nitrogen oxides nitrogen dioxide Potassium sodium azide perchloric acid Nitric acid aluminium chloride Amines Oxygen (as liquefied gas) powdered aluminium sodium aromatic hydrocarbons with |
| Conditions to avoid | no information available |
| Incompatible materials |
No data available
|
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity | LD50 Oral - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 401) LC50 Inhalation - Mouse - 4 h - 86 mg/l - vapor Remarks: (ECHA) Symptoms: Possible damages:, mucosal irritations LD50 Dermal - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 402) |
| Skin corrosion/irritation | LD50 Oral - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 401) LC50 Inhalation - Mouse - 4 h - 86 mg/l - vapor Remarks: (ECHA) Symptoms: Possible damages:, mucosal irritations LD50 Dermal - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 402) |
| Serious eye damage/irritation | Eyes - Rabbit Result: Eye irritation Remarks: (ECHA) Remarks: Risk of corneal clouding |
| Respiratory or skin sensitization | Local lymph node assay (LLNA) - Mouse Result: negative (OECD Test Guideline 429) |
| Carcinogenicity | Suspected of causing cancer |
| Germ cell mutagenicity | Test Type: Mutagenicity (mammal cell test): chromosome aberration. Sigma-Aldrich- 270997 Page 9 of 14 The life science business of Merck operates as MilliporeSigma in the US and Canada Test system: Chinese hamster ovary cells Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 473 Result: positive Test Type: Ames test Test system: Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: positive Test Type: In vivo micronucleus test Species: Mouse Cell type: Bone marrow Application Route: Gavage Method: OECD Test Guideline 474 Result: negative |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
Inhalation - May cause drowsiness or dizziness. - Central nervous systemInhalation - May cause drowsiness or dizziness. - Central nervous system
|
| Additional Information | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Repeated dose toxicity - Rat - male and female - Oral - 104 Weeks - NOAEL (No observed adverse effect level) - 6 mg/kg Repeated dose toxicity - Rat - male and female - Inhalation - 104 Weeks RTECS: PA8050000 Dizziness, Nausea, Vomiting, narcosis, Cough, irritant effects, Unconsciousness, Shortness of breath, respiratory paralysis, somnolence, depressed respiration, CNS disorders, inebriation Risk of corneal clouding. Sigma-Aldrich- 270997 Page 10 of 14 The life science business of Merck operates as MilliporeSigma in the US and Canada The following applies to aliphatic halogenated hydrocarbons in general: systemic effect: narcosis, cardiovascular disorders. Toxic effect on liver, kidneys. Dichloromethane is metabolized in the body producing carbon monoxide which increases and sustains carboxyhemoglobin levels in the blood, reducing the oxygen-carrying capacity of the blood. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Systemic effects: After absorption of large quantities: CNS disorders Drowsiness Dizziness drop in blood pressure Cardiac irregularities depressed respiration inebriation Unconsciousness narcosis Swallowing may result in damage to the following: Liver Kidney The following applies to aliphatic halogenated hydrocarbons in general: systemic effect: narcosis, cardiovascular disorders. Toxic effect on liver, kidneys. Other dangerous properties can not be excluded. This substance should be handled with particular care. |
| Persistence and degradability | Biodegradability aerobic - Exposure time 28 d Result: 68 % - Readily biodegradable. (OECD Test Guideline 301D) |
| Toxicity to fish | No data available |
| Toxicity to daphnia and other aquatic invertebrates | static test LC50 - Daphnia magna (Water flea) - 27 mg/l - 48 h (US-EPA) |
| Toxicity | No data available |
| Toxicity to bacteria | static test EC50 - activated sludge - 2.590 mg/l - 40 min (OECD Test Guideline 209) |
| Toxicity to algae | ErC50 - Pseudokirchneriella subcapitata (green algae) - 0,02 - 0,364 mg/l - 72 h Remarks: (ECHA) |
| Products Biodegradation | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | No data available |
|
Waste treatment methods |
No data available |
| UN number | ADR/RID: 1593 IMDG:1593 IATA:1593 |
| UN proper shipping name |
ADR/RID: : DICHLOROMETHANE IMDG:: DICHLOROMETHANE IATA:Dichloromethane |
| Transport hazard class(es) |
ADR/RID:6.1 IMDG:6.1 IATA:6.1 |
| Packaging group | ADR/RID:III IMDG: III IATA:III |
| Environmental hazards | ADR/RID: No IMDG: No Marine pollutant: No IATA: No |
| Special precautions for user | Tunnel restriction code (E) |
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Authorisations and/or restrictions on use | REACH - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles (Annex XVII) |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at wor |
| Chemical Safety Assessment |
A Chemical Safety Assessment has been carried out for this substance |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Paint Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Paint Remover at a competitive price from us. We have ready stock of Paint Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.