Ethyl Titanate
Product Code: RXSOL-19-1914-200
Product Short Description: Ethyl titanate, also known as titanium ethoxide, is a chemical compound with the formula Ti(OC2H5)4, a colorless liquid soluble in organic solvents
Product Technical Specification:
TECHNICAL SPECIFICATION::
-
Chemical Formula: Ti(OEt)4 or Ti(C2H5O)4
-
Molecular Weight: 228.111 g/mol
-
CAS Number: 3087-36-3
-
Appearance: Colorless liquid
-
Solubility: Miscible in most organic solvents, decomposes quickly in water
-
Density: 1.088 g/mL at 25 °C
-
Boiling Point: 150-152 °C (at 10 mmHg)
-
Refractive Index: 1.505 (n 20/D)
-
Flash Point: 40 °C
-
Viscosity: 70 mPa*s (at 20 °C)
-
Stability: Incompatible with strong oxidizing agents and strong acids. May decompose upon exposure to air or moisture
Remarks:
PRECAUTION::
General Precautions:
-
Flammability: Ethyl titanate is a flammable liquid and vapor, so keep it away from heat, sparks, open flames, and other ignition sources.
-
Storage: Store in a cool, well-ventilated place, away from incompatible materials.
-
Container: Keep containers tightly closed to prevent evaporation and potential ignition.
-
Ventilation: Ensure adequate ventilation, especially in confined areas, to prevent the buildup of flammable vapors.
-
Static Discharge: Take precautionary measures against static discharge, as this can cause ignition.
-
Tools: Use only non-sparking tools when handling ethyl titanate.
-
Eye and Skin Contact: Avoid contact with skin and eyes.
-
Inhalation: Avoid inhaling vapors or mist.
Personal Protective Equipment (PPE):
-
Gloves: Wear appropriate protective gloves to prevent skin contact.
-
Eye Protection: Wear protective eyeglasses or chemical safety goggles.
-
Face Protection: Use face protection if there is a risk of splashing or spraying.
-
Respirator: Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Images:

Benzoic Acid
Product Code: RXSOL-81-8168-005
Product Short Description: Benzoic Acid used in the manufacture of alkyd resins and drilling mud additive for crude oil recovery applications. It is also used as a rubber polymerization activator, retardant, resins, alkyd paint, plasticizers, dyestuffs, and fibers.
Product Technical Specification:
Remarks:
Uses of Benzoic Acid
Some important uses of C6H5COOH are listed below.
-
The production of phenol involves the use of benzoic acid.
-
This compound is used in ointments that prevent or treat fungal skin diseases.
-
C6H5COOH is used as a preservative in the food industry.
-
Benzoic acid is an ingredient in many cosmetic products, such as lipsticks.
-
It is also a precursor to benzoyl chloride, which finds its application in making other chemicals, dyes, perfumes, herbicides and medicines.
-
One of the components of toothpaste, mouthwash, and face wash creams is C6H5
-
This compound is also used in the manufacture of dyes and in insect repellants.
Images:

EPICHLOROHYDRIN
Product Code: RXSOL-19-1165-035
Product Short Description: PURE EPICHLORHYDRIN used extensively as an industrial intermediate, a laboratory reagent, and as an insecticide.
Product Technical Specification:
Physical Properties:
|
Melting point |
-57 °C |
|
Boiling point |
115-117 °C(lit.) |
|
Density |
1.183 g/mL at 25 °C(lit.) |
|
Vapour density |
3.2 (vs air) |
|
Vapour pressure |
13.8 mm Hg ( 21.1 °C) |
|
Refractive index |
n20/D 1.438(lit.) |
|
Flash point |
93 °F |
|
Storage temprature |
Store below +30°C. |
|
Solublity |
65.9g/l |
|
Form |
Liquid |
|
Specific gravity |
1.183 (20/4℃) |
|
Explosive limit |
3.8-21%(V) |
|
Water solublity |
6 g/100 mL (10 ºC) |
|
Dielectric constant |
22.9(20℃) |
|
Stability |
Unstable. Flammable - note wide explosion limits and low flash point. |
Images:

2-Methylimidazole
Product Code: RXSOL-60-6910-050
Product Short Description: 2 Methylimidazole is an organic compound white or colorless solid that is highly soluble in polar organic solvents and water.
Product Technical Specification:
Physical Properties:
|
Melting Point |
142-143 °C lit. |
|
Boiling Point |
267-268 °C lit. |
|
Density |
1.0500 rough estimate |
|
Vapour pressure |
<1 mm Hg ( 0 °C |
|
Refractive index |
1.4970 estimate |
|
Flash Point |
155 °C |
|
Solublity |
780g/l |
|
Storage temprature |
2-8°C |
|
pKa |
14.44±0.10 Predicted |
|
Form |
Crystalline Powder |
|
Colour |
White to light yellow |
|
PH |
10.5-11.5 |
|
Solublity |
Soluble in water and ethanol |
Remarks:
Uses:
-
2-Methylimidazole is used as a raw material for the preparation of nitroimidazole antibiotics, which is useful in combat anaerobic bacterial and parasitic infections. It acts as a ligand in coordination chemistry.
-
It is also employed as a hardener or accelerator for epoxy resin and auxiliary agent for textile dyes. Further, it acts as a catalyst for refolding of enhanced colored fluorescent protein.
-
It is also useful as a building block in the synthesis of biologically active compounds. In addition to this, it is used as an active pharmaceutical ingredient intermediate such as metronidazole and dimetridazole.
-
2-Methylimidazole is a monomethylated imidazole that can be used as a building block in the preparation of a wide range of biologically active compounds.
-
2-Methylimidazole as well as other imidazoles can be use as catalyst for refolding of enhanced coloured fluorescent protein.
-
2-Methylimidazole has been identified as a byproduct of fermentation and is detected in foods and mainstream and side-str eam tobacco smoke.
Images:

Dimethyl Sulfoxide
Product Code: RXSOL-19-6224-200
Product Short Description: This colorless liquid is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water.
Product Technical Specification:
Boiling point: 189 °C
Density: 1.10 g/cm³
Formula: C2H6OS
Melting point: 19 °C
Molar mass: 78.13 g/mol
Images:

Paint Remover Water Based
Product Code: RXSOL-18-1308-025
Product Short Description: Paint remover water based chemical free from solvent which has strong paint dissolving properties
Product Technical Specification:
|
Chemical Name
|
Percent
|
Value
|
Test Method
|
|
Sodium hydroxide(NaOH),min.
|
percent
|
48-55
|
STAS3068
|
|
Sodium carbonate (Na2CO3), max
|
percent
|
0.7
|
STAS3068
|
|
Proprietory Blend of paint remover chemicals
|
percent
|
45-52
|
-
|
Images:

SYNTHETIC THINNER
Product Code: RXSOL-19-3356-055
Product Short Description: Synthetic Thinner is used for thinning synthetic enamels and, thanks to its slow evaporation rate, ensures shine and good spreadability of the coating.
Product Technical Specification:
Images:

Anti Rusting Liquid Solution
Product Code: RXSOL-18-1820-030
Product Short Description: Anti Rust Liquis Solution is used on ferrous surfaces as a rust inhibiting treatment to protect parts during in-plant storage or handling. Steel components continually immersed in aqueous solutions of Anti Rust Liquis Solution will not rust. Anti Ru
Product Technical Specification:
|
Appearance |
Clear liquid |
|
Specific Gravity |
0.95-1.10 |
|
Odour |
Pleasent |
|
pH@5% |
9.50-10.50 |
|
Volatile by % |
<0.12 - 0.15 |
|
Flash Point |
220 °C |
|
Solubility in Water |
100% Soluble |
Remarks:
ANTI RUSTING LIQUID SOLUTION allows flexibility to customize the length of protection required and the applied cost per square foot (or m2). ANTI RUSTING LIQUID SOLUTION forms a solution in water and is applied to metal surfaces by spraying or dipping. It is easly soluble in water and provide resistance against bactria and proterct fungus also.
Images:

Mordant Pre Treatment Etching Wash
Product Code: RXSOL-18-1092-025
Product Short Description: Changes colour to black to indicate effectiveness
Product Technical Specification:
|
PRODUCT NAME |
: |
Mordant Pre Treatment Etching Wash |
|
Odour |
: |
Characteristic Odour |
|
Solubility in water |
: |
COMPLETE , ( 5.48 g/mL ) |
|
Density |
: |
> 1 g/cm3 |
|
Flashpoint |
: |
31 deg C |
|
Skin absorption/irritation |
: |
YES |
Images:

Tall Oil Fatty Acid
Product Code: RXSOL-19-2043-190
Product Short Description: Excellent versatility as a chemical intermediate and is widely used in alkyd resins, paints and coatings, lubricants, metalworking fluids, corrosion inhibitors, emulsifiers, surfactants and oilfield chemical formulations.
Product Technical Specification:
Typical Product Specification
|
Property |
Typical / Commercial Range |
|
Appearance |
Light yellow to amber liquid |
|
Acid Value |
Approx. 190–200 mg KOH/g |
|
Fatty Acids |
Typically ≥ 90% |
|
Rosin Acids |
Grade dependent |
|
Unsaponifiables |
Grade dependent |
|
Moisture |
Typically low |
|
Iodine Value |
Typically 120–160 g I₂/100 g |
|
Solubility in Water |
Insoluble |
|
Solubility |
Soluble in many organic solvents |
The exact fatty-acid content, rosin-acid content, colour and iodine value should be based on the TOFA grade you're actually supplying, because these vary substantially between commercial grades.
Remarks:
Tall Oil Fatty Acid TOFA Supplier Dubai UAE Dubai, Sharjah, Abu Dhabi, Jebel Ali and the UAE, Barka, Muscat Oman
Images:
