Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
This advanced, high s trength powder has the following features:
RXSOL ORG-10 is suitable for use with all polyamide, polysulfone and thin film, composite membranes. It can be used at temperatures from 15°C (60°F) up to the maximum recommended by the membrane manufacturer.
The standard dilution ratio is 25 grammes of ORG 10 per litre of water.
PROPERTIES
Form ………………..........Powder Alkalinity
Color……………………... White
Active as Na2O……………… 16.2%
Foam …………...……….. High
Total as Na2O ………… 19.8 %
PH of 1% solution ……. 10 to 12
BULK DENSITY - 0.95 -
FREEZING POINT: NOT APPLICABLE
Parameter | Value |
---|---|
Appearance | White to Off-white Powder |
Solubility in Water | Completely soluble |
pH (1% Solution) | 10 – 12 |
Specific Gravity | Not applicable (powder form) |
Foaming Nature | Moderate to High |
RXSOL ORG 10 is also suitable for meat and poultry plant as a cleaner for reverse Osmosis and Ultra filtration membranes. RXSOL ORG 10 must be used in a manner which prevents direct or indirect contamination of edible.
Odour | Odourless | |
Appearance | Powder,white,soluble in water | |
pH | ~6 at 1 % concentration | |
Vapour pressure | Not known | |
Density | 1200 kg/m3 at 20 °C | |
Non-combustible solid |
SAFETY AND HANDLING
HANDLING : Handle with care. Store in dry, cool and well ventilated environment.
SAFETY IMMEDIATE ACTIONS
Eye Contact : Avoid Eye Contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention.
Skin Contact : Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water.
Inhalation : Do not breathe gas/vapors. Otherwise, seek fresh air source at once. Seek medical attention.
Swallowed : Avoid ingestion. Otherwise, consume considerable quantity of water. Do not induce vomiting. Seek medical attention.
A Material Safety Data Sheet containing detailed information about this product is available upon request.
Appearance: Clear, viscous liquid
Specific Gravity at 25° C (77° F): 1.4
Flash Point (PMCC): None
Freeze Point: 0° C (32° F)
pH: 11.0
Future & Benefit
Features |
Benefits |
Odorless/tasteless |
Recommended for potable/fresh water tanks |
Concentrated liquid |
Cost effective and Easy to apply |
Forms protective silicate film |
Protects potable and fresh water tanks against corrosion.Prevents red water conditions |
Drinking Water Additives |
Safe to use |
Odour |
Odourless |
Appearance |
Liquid, Clear |
pH |
11.5 at 100 % concentration |
Boiling point |
100 °C at 760 mm /Hg |
Vapour pressure |
not known |
Freezing point |
<0 °C at 760 mm/Hg |
Completely soluble in water |
|
Specific gravity (water=1) |
1.15 - 1.7 |