Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-33-3756-025
| Property | Typical Value |
|---|---|
| Product Name | Aluminium Chlorohydrate |
| Abbreviation | ACH |
| Appearance | Clear to slightly hazy liquid |
| Colour | Colourless to pale yellow |
| Aluminium Oxide (Al₂O₃) | Typically 23–24%* |
| Basicity | Typically 80–85%* |
| Specific Gravity @ 20–25°C | Approx. 1.30–1.35* |
| pH (1% solution) | Approx. 3.5–5.0* |
| Solubility | Completely soluble in water |
| Ionic Character | Cationic |
| Primary Function | Coagulant / flocculant |
*Values depend on the specific commercial grade and should be confirmed against the final product COA.
ACH provides rapid coagulation and strong floc formation, helping improve clarification and filtration performance. Its high basicity generally results in lower alkalinity consumption and smaller pH reduction compared with some conventional aluminium coagulants.
It is particularly useful where efficient treatment is required with compact chemical dosing, reduced sludge production and good performance across changing raw-water conditions.
Product Code: RXSOL-19-3756-270
| Property | Typical Value |
|---|---|
| Product Name | Aluminium Chlorohydrate |
| Abbreviation | ACH |
| Appearance | Clear to slightly hazy liquid |
| Colour | Colourless to pale yellow |
| Aluminium Oxide (Al₂O₃) | Typically 23–24%* |
| Basicity | Typically 80–85%* |
| Specific Gravity @ 20–25°C | Approx. 1.30–1.35* |
| pH (1% solution) | Approx. 3.5–5.0* |
| Solubility | Completely soluble in water |
| Ionic Character | Cationic |
| Primary Function | Coagulant / flocculant |
*Values depend on the specific commercial grade and should be confirmed against the final product COA.
ACH provides rapid coagulation and strong floc formation, helping improve clarification and filtration performance. Its high basicity generally results in lower alkalinity consumption and smaller pH reduction compared with some conventional aluminium coagulants.
It is particularly useful where efficient treatment is required with compact chemical dosing, reduced sludge production and good performance across changing raw-water conditions.
Product Code: RXSOL-33-6604-230
| Property | Typical Specification |
|---|---|
| Appearance | Clear to slightly hazy liquid |
| Colour | Colourless to pale yellow |
| Active EDTA-4Na | 40.0 ± 1.0% |
| Specific Gravity @ 20°C | 1.25–1.40 |
| pH | 10.5–12.0 |
| Water Solubility | Completely soluble |
| Odour | Slight / characteristic |
| Physical State | Liquid |
| Ionic Character | Anionic |
Product Code: RXSOL-33-3363-250
Product Code: RXSOL-33-3302-030
Antiscalant RO is a liquid antiscalant designed to inhibit scale in cellulose acetate and polyamide membrane separation systems. The formulation contains a 35% by weight solution of poly acid that has a tight molecular weight range of 2000.
This product is designed for use in waters that do not have a high potential for colloidal and silt fouling of RO membrane surfaces (i.e. groundwater applications).
Antiscalant RO can be injected neat or diluted and a site‐specific dosage can be determined.
Application:
Antiscalant RO performance is achieved when the chemical is injected downstream of multimedia filters and upstream of cartridge filters. For maximum effectiveness, Antiscalant RO should be added prior to the static mixer or cartridge filter housing. For potable the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water
It reduces the risk of scaling and eliminates the use of hazardous acids, resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant. It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Product Code: RXSOL-33-3935-025
RXSOL 3935 uses sodium hypochlorite chemistry to provide available chlorine in aqueous systems.
Depending on pH, available chlorine exists primarily as hypochlorous acid and hypochlorite ion. Hypochlorous acid is an effective antimicrobial species that can oxidize and disrupt essential cellular components of microorganisms.
This oxidation mechanism helps control microorganisms in properly managed industrial water-treatment systems.
A sodium hypochlorite-based oxidizing biocide such as RXSOL 3935 offers:
Effective microbiological control
Oxidizing biocide action
Liquid-form chemical dosing
Control of slime-forming microorganisms
Helps reduce biological fouling
Suitable for automated dosing systems
Useful for cooling-water treatment
Applicable to selected wastewater disinfection systems
Suitable for selected RO pretreatment applications
Practical alternative to gaseous chlorine in appropriate applications
Cooling towers and recirculating cooling-water systems can provide favorable conditions for microbiological growth.
If uncontrolled, microorganisms may contribute to biofilm, slime, biological deposits, fouling, and under-deposit corrosion.
RXSOL 3935 can be used as part of an integrated cooling-water treatment program designed around system conditions, microbiological monitoring, water chemistry, and the required oxidant residual.
RO membrane systems require effective pretreatment to minimize fouling and maintain membrane performance.
Where sodium hypochlorite is used for microbiological control before RO, the residual free chlorine must be controlled because polyamide RO membranes can be damaged by oxidizing agents.
A suitable dechlorination stage should be incorporated where required, and residual chlorine should be monitored before the water enters the RO membranes.
Product Code: RXSOL-33-3321-250
PHYSICAL & CHEMICAL PROPERTIES
These properties are typical. Refer to the Material Safety Data Sheet (MSDS) SECTION 9, for the most current data.
| Color: | Clear, Yellow |
| Form: | Liquid |
| Odor: | Slight ammonia smell |
| Density: | 11.33 lb/gal |
| Specific Gravity @ 25oC (77oF): | 1.36 |
| pH (Neat): | 10.5 |
| Freeze-Thaw Recovery: | Complete |
| Viscosity @ 25oC (77oF): | 20 cp |
| Flash Point (PMCC): | None |
| Solubility in Water: | Complete |
| Freeze Point: | 32oF (0oC) |
| Volatile Organic Compounds (VOC): | 0% |
RXSOL Membrane Antiscalant ALKA 191T is a high-performance threshold antiscalant designed to stabilize a wide range of supersaturated salt solutions, helping to prevent scale formation and maintain efficient RO system operation.
It incorporates to improve the reliability of scale control by ensuring accurate and consistent dosing, thereby enhancing membrane protection and system performance.
RO antiscant
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.
RO Antiscalants are dosed directly to the RO feed water tank or feed water line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.
Key Features and Benefits
It reduces the risk of scaling and eliminates the use of hazardous acids,resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant . It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Key Features and Benefits
Application and Dosage
Our RO Antiscalant (HIGH PH) is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.
In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.
At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used.
Antiscalant RO RXSOL-33-3302-025
Antiscalant C.I ALKA RXSOL-33-2034-025
Membrane Antiscalant ALKA 191T RXSOL-33-3321-030
Antiscalant ORG EV 2030 RXSOL-33-3325-230
Antiscalant RXSOL ORG EV RXSOL-33-3327
Product Code: RXSOL-33-3325-235
Antiscalant ORG EV 2035 has been specifically developed with enhanced scale inhibition and dispersant properties to provide superior control of fouling throughout the entire distillation plant.
Improved Scale Control: Effectively inhibits alkaline scale formation across a wide range of operating conditions, including high Top Brine Temperatures (TBT).
Enhanced Dispersancy: Keeps suspended solids and precipitated salts dispersed in the system, preventing deposit buildup and sludge formation.
Reduced Fouling: Minimizes particulate fouling on heat transfer surfaces, helping to maintain optimal thermal efficiency and plant performance.
Lower Cleaning Frequency: Reduces the need for frequent chemical cleaning and maintenance shutdowns, leading to increased operational uptime.
Cost Savings: Decreases maintenance costs, cleaning chemical consumption, labor requirements, and production losses associated with fouling-related downtime.
Improved Plant Reliability: Helps maintain stable and efficient operation of Multi-Stage Flash (MSF) and other thermal desalination systems.
Extended Equipment Life: By reducing scale and deposit accumulation, Belgard EV2035 contributes to the protection and longevity of heat exchangers and other critical plant components.
With its advanced polycarboxylic acid-based formulation, Antiscalant ORG EV 2035 provides comprehensive fouling control, enabling distillation plants to operate more efficiently, reliably, and economically over extended operating periods.
Product Code: RXSOL-33-1528-050
Product Code: RXSOL-33-6005-100
| Appearance | Clear, Yellowish Amber Liquid |
| Flash point | Non-flammable |
| pH | Alkaline |
| Solubility in water | Soluble in all proportions |
| Freezing Point | -15 Degree |
SAFETY INFORMATION:
Gloves and goggles should be worn as a precaution when handling the concentrated solution. (See Material Safety Data Sheets for further information).
SAFETY INFORMATION:
Gloves and goggles should be worn as a precaution when handling the concentrated solution. (See Material Safety Data Sheets for further information).
Antiscalant 4101 is compatible with carbon steel and other commonly used materials of construction. Observe all safety precautions shown in the material safety data sheet, available on request.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
