Chlorinate Pool Salt LB 40
100 percent pure certified USP Grade salt produced specifically for swimming pool and spa chlorine generator.
- Part number
- RXSOL-31-3135-025
- Category
- Swimming Pool & Spa
- Brand
- RXSOL
Overview
Swimming Pool Water Softener, Pool salt water is a most common and popular source as a pool water softener for chlorine because it's affordable and easy to get
Applications
Pool Salt is our fast dissolving and easy to use resulting no stain causing additives.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Porduct Name | Chlorinate Pool Salt LB 40 |
| Part Number | RXSOL-31-3135-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Product name | Cas No | Weight | Formula |
| Sodium Chloride | 7647-14-5 | 100 | NaCl |
| Signal Word | Danger |
| Hazard Statements | Causes eye irritation |
| Precautionary statements | Wash face, hands and any exposed skin thoroughly after handling. |
| Classification of the substance or mixture | No data available |
| Supplemental Hazard Statements | No data available |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General advice | Show this material safety data sheet to the doctor in attendance |
| If inhaled | No data available |
| Eye Contact | Burning feeling and temporary redness. May cause irritation and redness. Rinse thoroughlywith plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult aphysician. If symptoms persist, call a physician. |
| Swallowed | No data available |
| Skin Contact | May cause dryness to skin. Wash off immediately with plenty of water for at least 15minutes. If skin irritation persists, call a physician. |
| Inhalation | Move to fresh air. Irritating to mucous membranes. May cause throat irritation. If symptomspersist, call a physician. |
| Ingestion | Drink plenty of water. Rinse mouth with water. If symptoms persist, call a physician. Not intended for human or animal consumption. |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | Keep patient under observation. Treat symptomatically |
| Flammability | No data available |
| Suitable extinguishing media | Material is non-flammable. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing media | Use of water spray when fighting fire may be inefficient. |
| Special hazards arising from the substance or mixture | No data available |
| Further information | Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
Carbon monoxide. Carbon dioxide (CO 2). |
| Advice for firefighters | As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. |
| Protective Equipment | Full protective gear. |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | Use personal protective equipment. Avoid dust formation. Avoid contact with the skin andthe eyes. |
| Spillage | No data available |
| Personal Protection | No data available |
| Enviromental Precaution | No data available |
|
Methods and materials for containment and cleaning |
Prevent further leakage or spillage if safe to do so. Avoid generation and spreading of dustUse personal protective equipment. Cover powder spill with plastic sheet or tarp to minimizespreading and keep powder dry. Take up mechanically and collect in suitable container fordisposal. Avoid dust formation. Clean contaminated surface thoroughly. |
| Reference to other sections | No data available |
| Advice on protection against fire and explosion | No data available |
| Incompatible materials | Bromine Trifluoride, Lithium. |
| Hygiene measures | Handle in accordance with good industrial hygiene and safety practice. Wash hands andface before breaks and immediately after handling the product. Do not eat, drink or smokewhen using this product. Remove and wash contaminated clothing and gloves, including theinside, before re-use. |
| Advice on safe handling | Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Avoid dustformation. Do not ingest. |
| Conditions for safe storage including any incompatibilities |
No data available |
| Storage conditions | Keep containers tightly closed in a dry, cool and well-ventilated place. |
| Storage class | No data available |
| Specific end use(s) | No data available |
| Advice on general occupational hygiene | No data available |
| Exposure controls | Treat as a nuisance dust. |
| Engineering Control | Showers Eyewash stations Ventilation systems. Ensure adequate ventilation to remove vapors, fumes, dust, etc. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. Ensure that eyewash stations and safety showersare close to the workstation location. |
| Eye/face protection | Safety glasses with side-shields. or. Tightly fitting safety goggles. for dusty conditions |
| Body Protection | Protective clothing. |
| Skin protection | Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls,as appropriate, to prevent skin contact. Wear latex or Nitrile gloves. |
| Respiratory protection |
Effective dust mask. If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Respiratory protectionmust be provided in accordance with current local regulations.
|
| Other Protection Measure | No data available |
| Physical state | Solid |
| Colour | White, crystalline |
| Odour | Odorless |
| Odor Threshold | No data available |
| pH | No data available |
| Melting Point | 800 °C / 1472 °F. |
| Boiling Point | 1413 °C / 2575 °F. |
| Flash Point | No data available |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | No data available |
| Explosive limits | No data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | 1 MM@ 855 deg |
| Viscosity | No data available |
| Density | No data available |
| Relative Density | No data available |
| Specific Gravity | 2.165 |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | Appreciable (26.43 % by weight at 20C) |
| Ignition temperature | No data available |
| Particle characteristics | No data available |
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibilityof hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials |
Bromine Trifluoride, Lithium
|
| Hazardous decomposition products | When heated to decomposition (above 1413 C) may emit toxic fumes of Na2O and Cl2. |
| Acute toxicity | LD50 Oral LD50 Dermal LC50 InhalationSodium Chloride 7647-14-5 = 3 g/kg ( Rat ) = 10 g/kg (Rabbit) > 42 g/m3 ( Rat ) 1 h |
| Skin corrosion/irritation | Skin - Rabbit Result Severe skin irritation (OECD Test Guideline 404) |
| Serious eye damage/irritation | May cause irritation |
| Respiratory or skin sensitization | Irritating to skin. Prolonged contact may cause redness and irritation.May cause irritation of respiratory tract. Inhalation of dust in high concentration may causeirritation of respiratory systemIngestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
No data available
|
| Additional Information | No data available. |
| Persistence and degradability | No data available |
| Toxicity to fish | 4747 - 7824 mg/L: 96 h Oncorhynchus mykiss LC50 flow-through 5560 - 6080 mg/L: 96 h Lepomis macrochirus LC50 flow-through 6020 - 7070 mg/L: 96 h Pimephales promelas LC50 static 6420 - 6700 mg/L: 96 h Pimephales promelas LC50 static 12946 mg/L: 96 h Lepomis macrochirus LC50 static 7050 mg/L: 96 h Pimephales promelas LC50 semi-static |
| Toxicity to daphnia and other aquatic invertebrates | 340.7 - 469.2 mg/L: 48 h Daphniamagna EC50 Static 1000 mg/L: 48h Daphnia magna EC50 |
| Toxicity | No data available |
| Toxicity to bacteria | No data available |
| Toxicity to algae | No data available |
| Products Biodegradation | No data available |
| Mobility in soil | No data availalble |
| Results of PBT and vPvB assessment | No data available |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data available |
| Product | No data available |
| Contaminated packaging | Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers |
| Waste treatment Method | This material, as supplied, is not a hazardous waste according to Federal regulations (40CFR 261). This material could become a hazardous waste if it is mixed with or otherwisecomes in contact with a hazardous waste, if chemical additions are made to this material, orif the material is processed or otherwise altered. Consult 40 CFR 261 to determine whetherthe altered material is a hazardous waste. Consult the appropriate state, regional, or local regulations for additional requirements. Dispose of in accordance with federal, state, andlocal regulations. |
| UN number | ADR/RID:- | IMDG:- |
IATA:- |
| UN proper shipping name | ADR/RID:Not dengerous goods | IMDG:Not dengerous goods | IATA:Not dengerous goods |
| Transport hazard class(es) | ADR/RID:- | IMDG:- | IATA:- |
| Packaging group | ADR/RID:- | IMDG:- | IATA:- |
| Environmental hazards | ADR/RID:No | IMDG:No | IATA:No |
| Special precautions for user | No data available | ||
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material, as supplied, does not contain any substances regulated as hazardous substances under the ComprehensiveEnvironmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments andReauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. |
| Other regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | A Chemical Safety Assessment was not carried out for this substance. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
