Corrosion Inhibitor Closed Open Cooling Water System
- Part number
- RXSOL-40-4028-025
- Category
- Corrosion Inhibitor
- Brand
- RXSOL
Overview
Supplementary corrosion inhibitor - open or closed cooling systems
RXSOL-40-4028 is an innovative, supplementary corrosion inhibitor developed specifically for use in open or closed cooling systems.
Applications
In particular, RXSOL-40-4028 creates an insoluble polymeric surface complex on copper and its alloys, and also reacts with copper in solution. RXSOL-40-4028 also works synergistically with other inhibitors to effectively control the corrosion of steel and aluminium in the system.
Control and dosage of RXSOL-40-4028 - The dosage of RXSOL-40-4028 required varies widely with different applications.
Dosage and directions
The initial dosage for an untreated system is 8 liters of product per 1000 liters of water.
Characteristics and notes
RXSOL-40-4028-025 is water treatment chemicals and cleassified as a cooling water treatment chemicals. RXSOL-40-4028-025 principally works as corrosion inhibitors in cooling water treatment chemicals.
RXSOL-40-4028-025 most commonly used as a corrosion inhibitor for open closed cooling water systems.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-40-4028 |
| Product Type | Corroision Inhibitor for closed Open cooling system |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Kolkata, Vizag, Fujairah, Muscat, Nairobi, Canada
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 ::: AOH: 0091 9821214367 |
| rxsolchemicals@gmail.com |
| Product contains: |
CAS No |
Contents | Health (class) |
Risk(R) |
|
Sodium Hydroxide |
1310-73-2 |
5-6% |
C |
R35 |
|
Triazole |
95-14-7 |
14-15% |
Xn, N |
20-22, 36, 53 |
| Proprietory Polymer Blend | ----- | 79-81% | ----- | ---- |
Symbol(s) C
Risk Phrase(s R35, 53
This product is toxic if swallowed. Product can be irritating to eyes and skin.
Toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment.
|
General Instructions |
In all cases of doubt, or when symptoms persist, seek more advice. Remove from exposure, rest and keep warm. Seek medical attention, treat symptomatically. |
|
Skin Contact |
Drench affected area with plenty of water, remove contaminated clothing immediately. Seek medical attention. |
|
Eye Contact: |
Irrigate the eyes thoroughly with water for at least 15 minutes, holding the eyelids apart if necessary. Obtain medical attention. |
|
Ingestion |
Wash out mouth with water and give plenty of water to drink. DO NOT induce vomiting. Obtain medical attention. |
| Extinguishing Media |
Carbon dioxide, dry chemical or foam. Water spray must be ineffective |
| Unsuitable Extinguishing Media | None. |
| Exposure Hazards | n/a |
| Hazardous Combustion Products | May give off toxic fumes |
| Special equipment for fire fighting | Wear self-contained breathing apparatus |
|
Personal precautions |
Wear appropriate protective clothing (see section 8). Also apply good industrial hygiene |
|
Environmental Precautions |
Observe all relevant national regulations |
| Clean up Procedure |
Flush spillages with large quantities of water and wash to waste |
|
Handling |
Avoid contact with eyes and skin |
|
STORAGE |
in a well ventilated area away from incompatible materials |
|
Exposure Limit (8hrs) |
for sodium hydroxide 2mg/m |
|
Type |
N/A |
| Protective Measures | |
| Respiratory: | In the event where significant exposure is possible wear self contained breathing apparatus |
| Hand: | Wear suitable impervious gloves |
| Eye: | Wear chemical goggles |
| Skin: | Wear suitable overalls |
|
Appearance |
Red / brown or clear liquids |
|
Odour |
Characteristic azole odour |
|
pH |
11 |
| Boiling Point / Boiling Range |
Not determined |
|
Melting Point/Melting Range |
N/A |
| Flash Point | none |
| Flammability | Non flammable |
| Autoflammability | N/A |
| Explosive Properties | N/A |
| Oxidising Properties | N/A |
| Vapour Pressure | N/A |
| Relative Density | 1.195 |
| Solubility in water | Miscible |
| Solubility in other solvents | Not known |
| Partition coefficient and N-octanol/water | ---------- |
| Other Data | None |
|
Stability |
Stable |
|
Conditions to Avoid |
None |
| Materials to avoid | Avoid all strong acids |
| Hazardous reactions | See Section 5 |
Irritating to the eyes and skin, inhalation may effect the respiratory tract.
Acute oral LD50 > 1000mg/kg
|
Environmental Effects |
May cause long-term adverse effect in the aquatic environment |
| Mobility | n/a |
| Degradability | n/a |
| Bioaccumulative Potential | n/a |
| Marine Pollutant | No evidence |
| Product : |
In accordance with national waste regulations |
| Container | Wash empty container thoroughly with water before disposal |
|
LAND TRANSPORT |
|
| Item Number | 8.41 (b) |
| UN Class |
8 |
| ADR Class | 8 |
| UN Number | 3266 |
| Packaging Group | III |
| Proper Shipping Name (PSN) | Corrosive liquid, basic, inorganic NOS (contains Sodium Hydroxide UN No 3266) |
| SEA TRANSPORT | |
| UN Number | 3266 |
| Class | Not restricted |
| Packing Group | III |
| Marine Pollutant | no |
| EMS | 8.15 |
| MFAG | 760 |
| IMDG Code | 8147 |
| PSN | Same as above |
Chemic al identity: Aqueous solution of organic heterocyclic compounds
Labelling according to the chemical (Hazard Information and Packaging) Regulations 2002 CHIP 3
|
EEC Number |
N/A |
| Symbol(s) |
C- Corrosive |
| RiskPhrase(s) | |
| R35 | Causes severe burns |
| R53 | May cause long-term adverse effect in the aquatic environment |
| Safety Phrase(s) | |
| S26 | In case of contact with eyes rinse immediately with plenty of water and seek medical advice |
| S37/39 | Wear suitable gloves and eye/face protection |
P roduct contains Sodium hydroxide, Triazole C - Corrosive, Xn -Harmful, N - Dangerous for the environment
| R20 |
Harmful by Inhalation |
| R22 | Harmful if swallowed |
| R35 | Causes severe burns |
| R36 | Irritating to eyes |
| R53 - | May cause long-term adverse effects in the aquatic environment |
| Further details might be available upon request from rxsol | |
|
Date SDS Revised November 2003Issue 2........................... |
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Corroision Inhibitor for closed & Open cooling system manufacturer and supplier in Fujairah, Dubai, Sharjah, Ajman, Sharajah, UAE MIddel East, Muscat, Barka, Sohar Oman, Mumbai, Kolkata, Vizag, Chennai, Gandhidham, Surat Gujrat, Nairobi Kenya, Canada
