Product Code: RXSOL-40-4160-210
Product Code: RXSOL-34-4160-025
RXSOL PAM Emulsion 1630 is a high-performance polyacrylamide (PAM) emulsion formulated for efficient solid-liquid separation in water and wastewater treatment applications. The active polyacrylamide polymer is dispersed in an oil phase using inverse-emulsion technology, providing a convenient liquid polymer with rapid activation in water.
RXSOL PAM Emulsion 1630 functions as an effective flocculant, promoting the aggregation of fine suspended and colloidal particles into larger, stronger flocs. This improves settling, clarification, flotation and sludge dewatering performance in a wide range of industrial processes.
Unlike conventional dry polyacrylamide powders that require extended preparation and maturation time, RXSOL PAM Emulsion 1630 inverts and dissolves rapidly when properly dispersed in water, typically developing within approximately 5–15 minutes, depending on water quality, temperature, concentration and mixing conditions.
Anionic Polyacrylamide Flocculant
Anionic Polyacrylamide Flocculant is an medium anionic charged polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.
RXSOL PAM Emulsion 1630 is suitable for a wide range of solid-liquid separation processes, including:
It is used for effluent treatment of inorganic suspended solids found in chemical, Fishery, food, textile, dye, other effluent water, mining and coal washing waste water, metal processing, etc.
The dosage range of Anionic Polyacrylamide Flocculant Anionic Polyelectrolyte Powder varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of Anionic Polyacrylamide Flocculant Anionic Polyelectrolyte Powder.
Jar Test: Put sample of effluent in a beaker and add Anionic Polyacrylamide Flocculant Powder as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.
Procedure and precautions upon dispersion and dissolving flocculants:-
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use.
RXSOL PAM Emulsion 1630 is used where rapid and efficient flocculation of suspended solids is required. It helps improve floc formation, settling rate, water clarity, sludge concentration and dewatering efficiency, while potentially reducing the overall volume of sludge requiring handling and disposal.
The product is particularly suitable for applications requiring a liquid polymer that can be prepared more rapidly than conventional dry PAM products and integrated into continuous chemical dosing systems.
Handling measures and precautions :
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage:
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight.
Properties :
| Form | :Powder |
| Colour | :Off-white |
| Odour | :Odourless |
| Flash point | :Not applicable |
| Flammability | :Not flammable |
| Bulk density | :Approx. 750 kg/m3 |
| Self ignition | :Not self-igniting |
| Explosion hazard | :Not explosive |
| Fire promoting properties | :Not fire-propagating |
| Solubility in water |
:Forms a viscous solution. |
Product Name: RXSOL Polyacrylamide PAM Emulsion Waste Water Treatment
Product Code: RXSOL-40-4160-210
Product Type: Liquid Polyacrylamide Flocculant
RXSOL Polyacrylamide PAM Emulsion RXSOL-40-4160-210 is a high-performance liquid polymer flocculant developed for water treatment, wastewater clarification, sludge dewatering and industrial solid-liquid separation processes.
The product is manufactured as a concentrated polyacrylamide emulsion in which the polymer is maintained in a readily activatable liquid form. Upon correct dilution and inversion in water, the polymer rapidly develops into an effective flocculating solution.
RXSOL PAM Emulsion combines high molecular weight, rapid activation, good storage stability and efficient flocculation performance. Compared with conventional dry polyacrylamide powders, the liquid emulsion can significantly reduce polymer preparation and maturation time, making it particularly suitable for continuous industrial dosing systems.
The activated polymer adsorbs onto suspended particles and forms bridges between individual particles, producing larger and stronger flocs. These flocs can then be more efficiently removed through sedimentation, clarification, flotation, filtration or mechanical sludge dewatering.
High-efficiency liquid polyacrylamide flocculant
High molecular weight polymer
Rapid inversion and dissolution in water
Typical activation/dissolution within approximately 5–15 minutes
Excellent suspended-solids agglomeration
Promotes formation of large and strong flocs
Improves sedimentation and clarification
Enhances sludge dewatering performance
Suitable for continuous chemical dosing
Lower preparation time compared with conventional dry PAM
Effective at relatively low treatment dosages
Suitable for a wide range of industrial wastewater applications
| Property | Typical Value |
|---|---|
| Product Name | RXSOL Polyacrylamide PAM Emulsion |
| Product Code | RXSOL-40-4160-210 |
| Physical Form | Liquid emulsion |
| Appearance | Milky white to off-white viscous emulsion |
| Polymer Type | Polyacrylamide-based emulsion |
| Solid Content | Typically 30–40%* |
| Ionic Character | Grade dependent* |
| Molecular Weight | High |
| pH | Typically 4–8* |
| Dissolution / Activation Time | Approx. 5–15 minutes |
| Solubility | Disperses and activates in water |
| Primary Function | Flocculation / solid-liquid separation |
| Application | Water and wastewater treatment |
*Final specifications should be established according to the selected RXSOL polymer grade and production batch.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Gulf, Yemen,UAE Middle East, Ruwi, Ghala, Muscat Barka Oman, Nairobi Kenya Africa, Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai, India, Canada, Nairobi Kenya, Sudan
