RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Detergent & Soap

Air Cooler Coil Cleaner Alkaline

Super high foaming, deodorized, alkaline coil cleaner recommended for cleaning and brightening aluminum finned cooling and heating coils, condensers and evaporators. It's strong foaming action penetrates beneath contamination and pushes dirt and grease fr
Part number
RXSOL-16-1040-020
Brand
RXSOL
Air Cooler Coil Cleaner Alkaline

Overview

Air Cooler Cleaner Alakaline ( Foam N Clean )
Acts as a Condenser Coil Re-Conditioner

Its special penetrating agents quickly emulsify & break up oily grime, dirt and air-borne industrial impurities.
Super high foaming, deodorized, alkaline coil cleaner recommended for cleaning and brightening aluminum finned cooling and heating coils, condensers and evaporators. It's strong foaming action penetrates beneath contamination and pushes dirt and grease from the coil to the outer surface.

Applications

Alkaline Coil Cleaner is specially formulated for brightening up all type of aluminum’s surfaces and marine alloy or zinc material for surface cleaning, allow 5 to 10 minutes and hose off with pressure water. Recommended for use in air-conditioning repair shops, hospitals, apartment blocks, industrial plants, service companies, leisure complexes, government offices, and any unit, workshop or establishment that maintains or services air-conditioning, supply vessel air-conditioning systems.

 

Dosage and directions

Do not soak overnight with these materials.
Always try small test area at first to determine the best dilution rate for the cleaning.
Economical - Highly concentrated
can beDiluted up to 5 or 10 parts with water

 

Characteristics and notes

Why RXSOL-16-009-alkis preferred by our CUSTOMER ?

⇔ Reduce air-conditioning cost  by allowing air-conditioning systems and units to run at maximum efficiency , Saves energy costs
⇔ A proper regular maintenance program including the use can substantially lengthen condenser life and save equipment replacement and downtime.
⇔ Cuts quickly through oily grime and Industrial air-borne impurities to restore condenser coils.
⇔ Due to its high penetration effect ,  Agitation or Scrubbing doesn't require
⇔ Simple spray on off operation to restores dirty condenser coils to peak efficiency
 

Characteristics:-

Formulated to remove oil,grease & carbon deposits from air coolers & scavenging system
Efficient and economical.
May be used for in-service cleaning.
Renders surfaces oil-repellent.
Maintains and stabilizes air cooler efficiency at maximum.
Saves time, maintenance costs and avoids risks of damage when dismantling.
Leaves no residue and has no harmful effect on engine.
Product in water solution is non-flammable, non-explosive and has no flash point.
Can be used for light carbon removal from machinery parts

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name : RXSOL-16-1040-020
Product Type : AIR COOLER CLEANER , ALKALINE-I

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : rxsolchemicals@gmail.com

 

       
Sodium Metasilicate 6834-92-0 NA NA
Ethoxylatednonylphenol 9016-45-9 NA NA
Potassium Hydroxide 1310-58-3 NA NA

Sodium Hydroxide 50%              1310-73-2
 


Irritating eyes possible redness and burns. Prolonged contact with skin cause sever burns. Breath to spray mist can be Irritation, If spill can causes slippery floor.

HAZARD FIRST AID

Skin

Corrosive, possible redness at point Remove contaminated clothing. Immediately wash
contact and may cause sever burns of excess chemical with plenty soap and water. apply prolonged contact. emollient cream. Obtain medical attention

Eyes

Corrosive, stinging with some redness irrigate immediately with plenty of water. Continue Possible cause corneal burns irrigation for at least 10 to 15 minutes. seek medical attention immediately

Ingestion

Corrosive, Nausea, vomiting and stomach Do not induce vomiting which may contaminate the upset and pain occur lungs. If unconscious do not give anything by mouth.if necessary give artificial respiratory. If conscious give one pint of water to drink. Obtain medical attention  immediately

Inhalation

Inhalation of air mist during spray may Remove to fresh air. Rest, treat symptomatically,
cause irritation of mucous membranes seek medical advice immediately.

Extinguishing Media

Product is non flammable

Special Protective Equipment

Wear breathing apparatus and full protective clothing. Keep container cool by spraying with water if exposed to fire

Exposure Hazards

None

Do not allow entry into drain, sewers and water courses. Mop up with absorbent material such as sand or earth. Scrap or shovel up and transfer to a suitable container. Clean up affected area with plenty of water Prevent slip hazards. See ‘Disposal Consideration’  

Store in original container. Store separately from strong oxidising agents. Avoid contact with skin, eyes and clothing. Keep out reach of children.
  

WEL= Workplace Exposure Limits PROTECTIVE EQUIPMENT:-

Engineering Measures

Provide sufficient ventilation during operations which cause vapour formation.

Hands Protection

Use suitable protective gloves if risk of skin contact.

Eyes Protection

Wear approved safety goggle.

Other Protection

Wear appropriate clothing, respiratory to prevent any possibility of inhalation.

Hygiene Measures

Make eyes wash & showering accessible, wash at the end of each work shift and before eating, smoking using the toilet.

Appearance

:

Clear brown liquid

Odour

:

 Herbal Odor

pH

:

13 ± 1

Flash point

:

100°C and above

Flammability

:

Non-flammable

Auto-flammability

:

Not determined

Relative density

:

1.35

Solubility

:

Soluble in water Complete

EVAPORATION RATE (H20 = 1) : 1.0

Stability Stable
Conditions to Avoid Mixtures of acids, isocyanates, rapid addition to hot water. Will catalyze reacting of other chemicals
Incompatibility Strong acids
Hazardous decomposition
products:
Non
Hazardous polymerization Will not occur


 

Corrosive, contact with eyes may cause to irritation and burns. Stinging and redness to skin, prolonged and repeated cause sever burns. Inhalation breath to spray mist may sting to mucous membranes and/or cough and a sore throat. The nature and severity of the acute effects precludes the likelihood of chronic exposure.
 

Biodegradability: Not Applicable Chemical Oxygen Demand ( mg.02/1): Not determined Aquatic toxicity studies have not been conducted on this product.

Recycle used containers if facilities are available, if not incineration is recommended. Failing this, use landfill. Be sure to comply with local authority regulation.

Proper Shipping Name : Pottasium Hydroxide, Solution  
UN Number : 1284  
ICAO-Air : Class 8 Packaging group III
IMO Sea : Class 8 Packaging group III
ADR Road : Class 8 Packaging group III

Supply classification: Corrosive Hazard pictogram: Risk phrases: R35 Causes sever burns R43 May cause sensitisation by skin contact.
Safety phrases: S24/25 Avoid contact with skin and eyes Corrosive S26 Incase of contact with eyes, rinse immediately with plenty of water
and seek medical advice S27 Take off immediately all contaminated clothing. S28 After contact with skin, wash immediately with plenty water
S37/39 Wear suitable gloves and eye/face protection.

Data from the following sources have been used to compile this document. HSE – EH40/93 Occupational exposure limits HSE – EH29/93 Occupational skin diseases; Health and Safety Precaution HSC – Safety Data Sheets for substances and preparation dangerous for supply. Date of issue: 31.08.2010

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
 

Request the signed SDS as PDF

Availability

Alkaline Coil Cleaner manufacturer and supplier in Mumbai, Gandhidham, Kolkata, Chennai, Visakhapatnam, Ennore, Fujairah, Ajman, Dubai, Sharjah, Muscat Oman, Canada BC

Our stock points and branches