Water Filter, Vessel, Softner, Accessory
Desiccants
- Part number
- RXSOL-32-1905-1700
- Brand
- RXSOL
Overview
A highly porous material, this material can have a surface area significantly over 200 square metres/g. Very suitable for use as a filter of fluoride, arsenic and selenium in drinking water
Technical specifications
Technical Parameter:
| GRADE | (Instrument - Air Drying Grade) |
| From | Beads |
| Size (mm or mic) | 5-8 / 3-5 |
| Bulk density (gm/lit) | 0.75-0.85 |
| Surface area (m2 / gm) | 345-415 |
| Pore Volume (cc/gm) | 0.40-0.50 |
| Adsorption Capacity (60 % RH) | 21.5 |
| Attrition Loss (%) | 0.2 |
| Chemical Composition (%) | |
| Na2O | NA |
| Fe2O | NA |
| SiO2 | NA |
| TiO2 | NA |
| Promoter | NA |
| LOI (300C-1000C) | 6-8 |
Applications
It has a high surface area which adsorbs vapors without any change in form. Will not soften or disintegrate easily when immersed in water.
Dew points to -40°F and lower may be achieved depending on dryer design and operating conditions.
The 1/8” (2-5mm) bead is the size most frequently used in regenerative dryers.
The 3/16” (4-8mm) bead is used when pressure drop and surface area requirements fall between 1/8” and 1/4” material. It is suitable for most systems.
The 1/4” (5-10mm) is used both as a pre-bed material to support large desiccant beds or as a buffer for silica gel beads. Pressure drop is slightly lower than 1/8” (25mm) material.
If size is not known or specified, the 1/8” (2-5mm) size is usually satisfactory.
Dosage and directions
Product Benefits:
- High adsorption capacity. With high surface area and excellent pore distribution, has a high water adsorption capacity. This reduces initial cost, energy consumption and operating costs through smaller bed sizes and/or longer operating cycles.
- Low abrasion. Insures less dusting during tower depressurization or loading. Low abrasion means low pressure drop and a reduced chance of plugging the afterfilter.
- Resists liquid water. Water slugging due to upstream failure of aftercooler, separators or drain traps will not fracture. The adsorption capacity of the desiccant can be restored after complete regeneration.
- High crush strength. High crush strength, which limits dusting, is important during loading of desiccant towers. High crush strength makes effective as a prebed material when used with other types of desiccants.
- Uniform bead sizes. Is a uniformly sized bead. It provides low pressure drop to minimize channeling and ensures utilization of the full bed column section.
Physical Properties:
| 1/8” (2-5mm) | 3/16”(4-8mm) | 1/4” (5-10mm) | |
| Color and form | White bead | White bead | White bead |
| Bulk density | 48 lbs/Ft3 | 48 lbs/Ft3 | 48 lbs/Ft3 |
| Crush strength | 17-30 lbs | 145-60 lbs | 50-70 lbs |
| Surface area | 1.74 x 106 sq ft/lb | 1.65 x 106 sq ft/lb | 1.59 x 106 sq ft/lb |
|
Static adsorption Humidity |
- | - | - |
|
100% RH 90% RH 60% RH 10% RH |
42.0% 37.5% 21.0% 7.5% |
40.0% 35.0% 21.0% 7.0% |
36.0% 32.0% 17.5% 6.0% |
Characteristics and notes
A desiccant for dry and absorbing moisture water from the air and as a filter of fluoride, arsenic and selenium in drinking water.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-61-1905-1700 |
| Product Type | Desiccants |
| Nature | Desiccants are hygroscopic materials that adsorb moisture from the air. |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujaiarh, Muscat
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
PRODUCT IDENTIFICATION PRODUCT NAME: Dessicant
INGREDIENTS
|
COMPONENTS |
CAS NO. |
% BY WEIGHT |
| Molecular Sieve Balls | 70955-01-0 | 45% |
| Silica Gel | 112926-00-8 | 35% |
| Bentonite clay | 1302-78-9 | 20% |
|
EYES: |
Can cause mild irritation, especially when wet. |
|
SKIN: |
Can cause mild irritation. |
|
INHALATION: |
Can cause mild upper respiratory tract irritation. |
|
INGESTION: |
Can cause mild irritation. |
Dessicant is a low health risk by inhalation and should be treated as a nuisance dust as specified by the ACGIH. This product contains total silicates at <1% by weight.
|
EYES: |
Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician. |
|
SKIN: |
Wash with soap and water for at least 15 minutes. Consult a physician if irritation persists. |
|
INHALATION: |
Remove to fresh air. Check for clear airway, breathing, and presence of pulse. Provide CPR for persons without pulse or respirations. Consult a physician. |
|
INGESTION: |
If swallowed, dilute by drinking large amounts of water. Never give,anything by mouth to a convulsing or unconscious person. Do not induce vomiting. Consult a physician. |
| SUITABLE EXTINGUISHING AGENTS: |
Use fire fighting measures that suit the environment. |
|
PROTECTIVE EQUIPMENT: |
Wear self-contained respiratory protective device. Wear fully protective suit. |
|
ACCIDENTAL RELEASE MEASURES: |
Person-related safety precautions: Wear protective clothing. |
Dessicant is a low health risk by inhalation and should be treated as a nuisance dust as specified by the ACGIH. This product contains total silicates at <1% by weight.
|
HANDLING: |
Ensure good ventilation/exhaust at the workplace. Prevent formation of dust. Provide suction extractors if dust is formed. |
|
Protection against explosions and fires: |
No special measures required. |
|
STORAGE: |
Keep material dry. Storage in one common storage facility is not required. |
Personal protective equipment. Do not inhale dust. Avoid contact with the eyes. Use suitable respiratory protective device in case of insufficient ventilation.
Short term filter device: Filter P2. Protection of hands: impervious gloves. Eye protection: Safety glasses.
| APPEARANCE: | Off-white, crystalline or gelatinous granules, pellets. |
| BOILING POINT: | Undetermined |
| FREEZING POINT: | 3,700°F (2038°C) |
| VAPOR PRESSURE: | Not applicable |
| AUTOIGNITING: | Product is not self igniting |
| SPECIFIC GRAVITY: | 3.2 |
| DENSITY: | Loose Bulk: 39-52 lb/ft (0.62-0.83 g/cm ). |
| pH: | 10% in water 9.4-10.1 |
| ODOR: | Characteristic |
|
CHEMICAL STABILITY CONDITIONS TO AVOID |
A rise in temperature may result from contact with water. |
|
INCOMPATIBILITY |
None. |
|
HAZARDOUS DECCSIPOSITION PRODUCTS |
None if used according to specifications. |
| HAZARDOUS POLYMERIZATION: |
None. Non-corrosive. |
N/A
N/A
Collect in containers, bags, or covered dumpster boxes. If reuse or recycling is not possible, material may be disposed of at an industrial landfill.
Waste disposal key: 16 03 01 513 05
Disposal must be made according to official regulations.
DOT
| UN Number | Not Applicable |
| Proper shipping name | Desiccants |
| Hazard Class | Not regulated as dangerous goods. |
| Packing group | Not Applicable |
TDG
| UN Number | Not Applicable |
| Proper shipping name | Desiccants |
| Hazard Class | Not regulated as dangerous goods. |
| Packing group | Not Applicable |
IATA
| UN Number | Not Applicable |
| Proper shipping name | Desiccants |
| Hazard Class | Not regulated as dangerous goods. |
| Packing group | Not Applicable |
IMDG/IMO
| UN Number | Not Applicable |
| Proper shipping name | Desiccants |
| Hazard Class | Not regulated as dangerous goods. |
| Packing group | Not Applicable |
NA
The above information is accurate to the best of our knowledge.however, since data, safety standards, and government regulations are subject
to change and the conditions of handling and use, or misuse, are beyond our control, seller makes no warranty, either express or implied, with
respect to the completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User
should satisfy himself that he has all current data relevant to his particular use.
Availability
Desiccants manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Desiccants at a competitive price from us. We have ready stock of Desiccants in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
