RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Pump & Accessory

ETHYLENE GLYCOL - 30%

Solution can be used to prevent freezing and boiling in cooling systems.
Part number
RXSOL-19-1691-210
Brand
RXSOL
ETHYLENE GLYCOL - 30%

Overview

Ethylene Glycol also known as ethane 1 2 diol has a transparent odorless slightly viscous appearance and a pleasant flavor Ethylene Glycol is widely used to lower the freezing point of water used in car radiators

Applications

Ethylene glycol 30 likely refers to a 30% concentration of ethylene glycol (EG), most commonly a mixture with water used as a heat transfer fluid or antifreeze. This concentration has a boiling point of approximately 104.4 degree C (220 degree F)) and is a common mix for applications like ultrasound test objects due to its consistent acoustic properties across a range of temperatures. It can also be sold in pure or diluted forms in various package sizes, such as 30 kg containers or 100-liter barrels.

Characteristics and notes

Key properties and uses of 30% ethylene glycol solutions ::: 
Boiling Point: A 30% solution has a boiling point of around 104.4 degree C (220 degree F)), which is higher than pure water.  
Antifreeze/Anti-boil: Like other EG concentrations, a 30% solution can be used to prevent freezing and boiling in cooling systems.  
Acoustic Properties: A mixture of 30% ethylene glycol and water has been found to be an excellent standard for ultrasound testing, maintaining a consistent acoustic velocity of 1638 m/sec over a wide temperature range.  
Reserve Alkalinity: Solutions in the 30% to 40% range typically have a Reserve Alkalinity (RA) of 4.5 to 6.0 ml, which indicates the fluid's resistance to becoming acidic over time.  
Availability: It is commercially available in various concentrations and packaging sizes, including 30 kg drums and 100-liter barrels, with different grades like reagent grade.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name RXSOL-19-1691-210
Product Type    Ethylene Glycol - 30%

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com

Chemical Name

CAS Number

EC Number

Conc.

Ethylene Glycol

107-21-1

203-473-3

30%

De Ionized Water  - 70%

Information concerning particular hazards for human and environment: R 22 Harmful if swallowed.

General information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.

After swallowing

Call for a doctor immediately.

Suitable extinguishing agents Use fire extinguishing methods suitable to surrounding conditions.
Protective equipment

No special measures required.

Person-related safety precautions: Not required.
• Measures for environmental protection:
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
• Measures for cleaning/collecting:
Dilute with plenty of water.
Dispose contaminated material as waste according to item 13.

Handling:
Information for safe handling: No specific requirement
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
107-21-1 ethanediol

TLV (USA)

IOELV (EU)

WEL (Great Britain)

Short-term value: C 100 mg/m³
H
Short-term value: 104 mg/m³, 40 ppm
Long-term value: 52 mg/m³, 20 ppm
Skin
Short-term value: 104** mg/m³, 40** ppm
Long-term value: 10* 52** mg/m³, 20** ppm
Sk *particulate **vapour

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Respiratory protection: Not required.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Goggles recommended during refilling

General Information:

Form

Fluid

Colour

Colourless

Odour

Sweetish

Change in condition:

Meltingpoint/Melting range

12.4°C

Boiling point/Boiling range

197°C

Flash point

111°C

Ignition temperature

410°C

Danger of explosion Product does not present an explosion hazard.
Explosion limits:
Lower 3.2 Vol %
Upper 53 Vol %
Vapour pressure at 20°C 0.08 hPa
Density at 20°C 1.05 g/cm³
Solubility in / Miscibility with:
water at 20°C 1 g/l
Viscosity  
Dynamic at 20°C 21 mPas

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Acute toxicity:

LD/LC50 values relevant for classification:
Oral LD50 5840 mg/kg (rat)
Dermal LD50 9530 mg/kg (rabbit)
Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known

General notes:
Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Product:
Recommendation

Must not be disposed together with household garbage.

Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

Land transport ADR/RID (cross-border)  ADR/RID class: - Not Applicable
Maritime transport IMDG: IMDG Class: - Not applicable
Marine pollutant: No
Air transport ICAO-TI and IATA-DGR: ICAO/IATA Class: - Not applicable
Not Classified as dagerous good for Transport

Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
• Code letter and hazard designation of product:
Xn Harmful
• Risk phrases:
22 Harmful if swallowed.
• Safety phrases:
2 Keep out of the reach of children.

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual  relationship.    

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.                                                                                               

Request the signed SDS as PDF

Availability

ETHYLENE GLYCOL - 30% manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of ETHYLENE GLYCOL - 30% at a competitive price from us. We have ready stock of ETHYLENE GLYCOL - 30% in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches