Poly Quaternium 7
- Part number
- RXSOL-19-3542-025
- Category
- Detergent & Soap
- Brand
- RXSOL
Overview
Polyquaternium 7 is a unique copolymer especially developed for improved compatibility and clarity in anionic surfactant systems In shampoo it increases and stabilizes foam increases viscosity while contributing excellent lubricity wet combability and lustre to hair without any build up.
Applications
Polyquaternium-7 is a cationic copolymer that improves compatibility, clarity, slip, moisturization, and anti-static properties in skin and hair care products
Dosage and directions
Polyquaternium 7 is a water-soluble cationic co-polymer, usually sold as an 8-10% aqueous solution. It is used for conditioning.
Characteristics and notes
Polyquaternium 7 is a cationic copolymer used in cosmetics, especially for hair care to increase foam and in skin care for lubricity. It is also used in soaps.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Porduct Name | Poly quaternium 7 |
| Part Number | RXSOL-19-3542-025 |
Company Details:....
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
Mixtures
| Synonyms | P(AAm-co-DADMAC) |
No components need to be disclosed according to the applicable regulations.
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Label elements | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
Description of first aid measures
| If inhaled | If breathed in, move person into fresh air. If not breathing, give artificial respiration. |
| In case of skin contact | Wash off with soap and plenty of water. |
| In case of eye contact | Flush eyes with water as a precaution. |
| If swallowed | Never give anything by mouth to an unconscious person. Rinse mouth with water. |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
Extinguishing media
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
| Special hazards arising from the substance or mixture |
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Highly flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard.
In a fire or if heated, a pressure increase will occur and the container may burst, with the
risk of a subsequent explosion. The vapor/gas is heavier than air and will spread along
the ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Carbon oxides
Nitrogen oxides (NOx)
Hydrogen chloride gas
|
| Advice for firefighters |
Wear self-contained breathing apparatus for firefighting if necessary. |
| Further information |
No data available
spray to keep fire-exposed containers cool.Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
|
| Personal precautions, protective equipment and emergency procedures |
Avoid breathing vapors, mist or gas.
For personal protection see section 8.
|
| Environmental precautions | No special environmental precautions required. |
| Methods and materials for containment and cleaning up | Keep in suitable, closed containers for disposal. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
|
Conditions for safe storage, including any incompatibilities
Storage conditions
|
Keep container tightly closed in a dry and well-ventilated place. Store in cool place. |
| Storage class | Storage class (TRGS 510): 12: Non Combustible Liquids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
Control parameters
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
| Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves after use in accordance with
applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU)
2016/425 and the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail
sales@kcl.de, test method: EN374
If used in solution, or mixed with other substances, and under conditions which
differ from EN 374, contact the supplier of the EC approved gloves. This
recommendation is advisory only and must be evaluated by an industrial hygienist
and safety officer familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use
scenario.
|
| Body Protection | Impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace |
| Respiratory protection | Respiratory protection not required. For nuisance exposures use type OV/AG (US) or type ABEK (EU EN 14387) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
| Control of environmental exposure | No special environmental precautions required. |
| Physical state | Liquid. |
| Colour | No data available |
| Odor | No data available |
| Odor Threshold | No data available |
| pH | Not available. |
| Melting Point | <-50°C (<-58°F) |
| Boiling Point | 64°C (147.2°F) |
| Critical temperature | 230.85°C (447.5°F) |
| Flash point | Closed cup: -26°C (-14.8°F) |
| Evaporation rate | Not available. |
| Flammability (solid, gas) |
Extremely flammable in the presence of the following materials or conditions: oxidizing
materials.Extremely flammable in the presence of the following materials or conditions: oxidizing
materials.
|
| Lower and upper explosive (flammable) limits |
Lower: 1.2% Upper: 6.9% |
| Vapor pressure | 20.2 kPa (151.5 mm Hg) [room temperature] |
| Vapor density | 2.9 (Air = 1) |
| Specific Volume (ft 3 /lb) | 1.4854 |
| Gas Density (lb/ft 3) | 0.6732 (20°C / 68 to °F) |
| Relative density | 0.67 |
| Solubility | Not available. |
| Solubility in water | 0.05 g/l |
| Partition coefficient: noctanol/water | 3.87 |
| Auto-ignition temperature | 253°C (487.4°F) |
| Decomposition temperature | Not available |
| Viscosity | Dynamic (room temperature): 0.25 mPa·s (0.25 cP) |
| Flow time (ISO 2431) | Not available. |
| Molecular weight | 84.18 g/mole |
Aerosol product
| Heat of combustion | -44505684 J/kg |
| Reactivity | No data available |
| Chemical stability | Stable under recommended storage conditions. |
| Possibility of hazardous reactions | No data available |
| Conditions to avoid | No data available |
| Incompatible materials |
Strong oxidizing agents
|
| Hazardous decomposition products | In the event of fire: see section 5 |
Information on toxicological effects
| Acute toxicity |
Oral: No data available
Inhalation: No data available
Dermal: No data available
|
| Skin corrosion/irritation | No data available |
| Serious eye damage/eye irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity |
No data available
|
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Specific target organ toxicity - repeated exposure | No data available |
| Aspiration hazard | No data available |
| Additional Information | No data available |
| Persistence and degradability | No data available |
| Toxicity to fish | Static test LC50 - Oncorhynchus mykiss (rainbow trout) - 75 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates | Static test EC50 - Daphnia magna (Water flea) - 42,81 mg/l - 48 h (OECD Test Guideline 202) Remarks: (in analogy to similar products) The value is given in analogy to the following substances: maleic acid |
| Toxicity | Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 1.520 mg/l - 96 h |
| Toxicity to bacteria | EC10 - Bacteria - 14 mg/l - 72 h Remarks: (Lit.) EC5 - E.coli - 15.000 mg/l Remarks: (Lit.) (maximum permissible toxic concentration) |
| Toxicity to algae | Static test ErC50 - Pseudokirchneriella subcapitata (green algae) - 74,35 mg/l - 72 h (OECD Test Guideline 201) Remarks: (in analogy to similar products) The value is given in analogy to the following substances: maleic acid |
| Products Biodegradation | The methods for determining the biological degradability are not applicable to inorganic substances. |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data available . |
| Product | Offer surplus and non-recyclable solutions to a licensed disposal company. Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself. |
| Contaminated packaging | Dispose of as unused product. |
| Waste treatment Method | See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions. |
| UN number | ADR/RID:2404 IMDG:2404 IATA: 2404 |
| UN proper shipping name | ADR/RID:PROPIONITRILE IMDG:PROPIONITRILE IATA:PROPIONITRILE |
| Transport hazard class(es) | ADR/RID: 3 (6.1) IMDG: 3 (6.1) IATA:3 (6.1) |
| Packaging group | ADR/RID: II IMDG: II IATA:II |
| Environmental hazards | ADR/RID: No IMDG: No IATA: No |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
