ProShield PC55 RO Biocide

Categories: RO Chemicals-33
Images: Alt
Product Short Description: Antimicrobial used for reverse osmosis water treatment to Eliminate most microbial growth Stable, broad spectrum
Product Description:

Isothiazolinone based ProShield PC55 RO Biocide bactericide an antimicrobial and preservative used in a wide variety of applications, such as bactericide for reverse osmosis water treatment.

Product Application:

For Shut Down longer than as 24 hrs, Biological growth in the RO system should be controlled. This requires the introduction of a chemical to kill bacteria and prevent growth. Any Preservation chemical would then have to be rinsed out from the system when it is restarted.

Product Dose:
Flow Rate during flushing should be based on the recommended cleaning instruction flow rates. This is  normally 30-40 gpm ( 6.8 to 9.1 m3/ Hr ) per pressure vessel.
 
Flushing time should be long enough for the conductivity out to equal the conductivity in. Typically 15 - 20 minutes.
 
If the permeate flush is unavailable, feed water can be  used by allowing low pressure water to replace the water within the system by delaying the inlet valve closing. Scale inhibitor should be turned off during the permeate flush.
 
if the temperature in the RO Membrane system more then 115 degree fahrenheit, flush water should be continiously passed through the system to prevent memebrane degradation.
Product Note:

This chemical quickly biodegrades.

With a shelf time of one year when stored at room temperature in a dark, air-tight, and moisture-proof place.

Isothiazolinone Biocide is high performance, broad spectrum, antimicrobial agents based on the proven isothiazolone chemistry. Isothiazolinone Biocide 14% is excellent Isothiazolinone biocide and Oilfield Bactericide. They are effective at very low concentrations in controlling both the planktonic and surface growth of bacteria, fungi and algae and have been produced specifically for water treatment and paper mill applications. It could be used Isothiazolinone in water treatment and Oilfield Bactericide applications

The bactericidal effect of Isothiazolinones Biocide Cooling Water Treatment is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes,Isothiazolinone can quickly inhibit their growth, thus leading to death of these microbes.Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, noresidual, safety in operation, good compatibleness, good stabilization, low cost in operation.

Application  :

Isothiazolinone as chemical biocide algaecide is ideally suited to meet the requirements of an industrial water treatment biocide and excellent Isothiazolinone biocide. Isothiazolinone 14% microbicide is not deactivated by suspended organic matter, and is compatible with other water treatment additives, including chlorine. With the recent change of many cooling towers and paper mills to alkaline operating conditions, it is important to use a biocide such as Isothiazolinone 14% which remains stable at higher pH values. Isothiazolinone 14% is of low toxicity at use levels, easily deactivated and biodegradable.

-Used as sludge stripper
-Used as biocide
-Used in waste water treatment in oilfield
-Cosmetic
-Papermaking
-Pesticide
-Leather
-Detergent

Application Field  / Industry :

  • Adhesive industry
  • Construction industry
  • Gypsum, plaster and mortar
  • Laundry and cleaning agents
  • Lubricant/coolants
  • Paint and coatings industry
  • Paper manufacture
  • Technical suspension/emulsion
  • Textile and leather industry
  • Water treatment 

Dose :

When used as sludge stripper for grade II, the dosage of 150-300mg/L is preferred, when used as boicide, the dosage of 80-100mg/L is preferred, and charges every 3-7 days. No used together with oxidative fungicidal such as chlorine, and no used in cooling water system containing sulfur. When used together with quaternary amine, the effect will be better. When used as industrial fungicide, the dosage of 0.05-0.4% is preferred.

Technical Specification :

 

Appearance Light yellow liquid
Active Ingredient 14%
Viscosity 16 cps @ 25°C
pH 2.0-4.0
Specific Gravity (g/ml) at 20°C

1.27-1.33

5-Chloro-2-Methyl-4-Isothiazoline-one

10.1 - 11.3

Magnesium (%) 4.2 - 5.5
2-Methyl-4-Isothiazoline-3-one 3.0 - 4.1

 

Storage & Handling

Do not store in direct sunlight. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Keep container tightly closed. Avoid ingestion and inhalation.

Product Technical Specification:

Appearance Light yellow liquid
Active Ingredient 14%
Viscosity 16 cps @ 25°C
pH 2.0-4.0
Specific Gravity (g/ml) at 20°C

1.27-1.33

5-Chloro-2-Methyl-4-Isothiazoline-one

10.1 - 11.3

Magnesium (%) 4.2 - 5.5
2-Methyl-4-Isothiazoline-3-one 3.0 - 4.1
Remarks:

Isothiazolinone is high performance, broad spectrum, antimicrobial agents based on the proven isothiazolone chemistry. It is excellent Isothiazolinone biocide and Oilfield Bactericide. They are effective at very low concentrations in controlling both the planktonic and surface growth of bacteria, fungi and algae and have been produced specifically for water treatment and paper mill applications. It could be used Isothiazolinone in water treatment and Oilfield Bactericide applications

The bactericidal effect of Isothiazolinones is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes,Isothiazolinones can quickly inhibit their growth, thus leading to death of these microbes.Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, noresidual, safety in operation, good compatibleness, good stabilization, low cost in operation.

prod_useful_area:
Product Supply Location:

Isothiazolinone Bactericide supplier in Barka, Oman, Ruwi, Barka, Muscat, Fujairah, Abudhabi, Sharjah, Diera, Dubai, UAE Middle East, Mumbai, Navi Mumabi MIDC, Nashik, Pune, Taloja MIDC, Panvel, Gandhidham, Sikka Jamnagar, Manglore, Goa, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Jungalpur, Paradip, Ranchi, Tata, Patna, Varanashi, Munger

stock-clearance.png