SODIUM BROMIDE LR
- Part number
- RXSOL-60-6605-483
- Category
- Wall Wash Test Kit
- Brand
- RXSOL
Overview
Sodium Bromide is not technically an algaecide, but is used with granular chlorine as a catalyst to convert the bromides into the potent algae killer, hypobromous acid. Bromides are usually used not for algae control, but to kill pool algae in out-of-control cases.
Applications
Also known as Sedoneural, sodium bromide has been used as a hypnotic, anticonvulsant, and sedative in medicine, widely used as an anticonvulsant and a sedative in the late 19th and early 20th centuries. Its action is due to the bromide ion, and for this reason potassium bromide is equally effective.
Dosage and directions
Adverse effects related to bromide therapy include neurologic deficits polyphagia, polyuria, polydipsia, and vomiting, and bromide use may be associated with the development of pancreatitis.
Characteristics and notes
Sodium is a positively charged radical, which is very unstable because it is a highly reactive metal. Even to protect it for its reactivity, it is kept inside kerosene oil.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | SODIUM BROMIDE LR |
| Part Number | RXSOL-60-6605-483 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | CAS | EC number | Weight |
| SODIUM BROMIDE LR | 7647-15-6 | 231-599-9 | 102,89 g/mol |
| Signal Word | Warning |
| Hazard Statements |
H336 May cause drowsiness or dizziness.
H361 fd Suspected of damaging fertility. Suspected of damaging the unborn child.
H373 May cause damage to organs (Central nervous system) through
prolonged or repeated exposureH336 May cause drowsiness or dizziness.
H361fd Suspected of damaging fertility. Suspected of damaging the
unborn child.
H373 May cause damage to organs (Central nervous system) through
prolonged or repeated exposure
|
| P280 Wear protective gloves.P305 + P351 + P338 | NA |
| Precautionary statements - response |
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe dust.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable
for breathing. Call a POISON CENTER/ doctor if you feel unwell.
P308 + P313 IF exposed or concerned: Get medical advice/ attention
|
| Response | None |
| Disposal | NA |
| Prevention | NA |
| Supplemental Hazard Statements | None |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General advice | Show this material safety data sheet to the doctor in attendance |
| If inhaled | After inhalation: fresh air. Call in physician. |
| Eye Contact | After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses. |
| swallowed | After swallowing: immediately make victim drink water (two glasses at most). Consult a physician. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician. |
| Inhalation: | NA |
| Ingestion: | NA |
| Notes to Physician | NA |
| If swallowed | After swallowing: immediately make victim drink water (two glasses at most). Consult a physician |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Flammability | NA |
| Flash Point | NA |
| Suitable extinguishing media | Use extinguishing measures that are appropriate to local circumstances and the surrounding environment |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Hydrogen bromide gas Sodium oxides Not combustible.
Ambient fire may liberate hazardous vapours.
|
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
NA |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Protective Equipment | NA. |
| Specific Hazards Arising from the Chemical | NA |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Spillage | NA |
| Personal Protection | Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Enviromental Precaution | Do not let product enter drains |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts. |
| Reference to other sections | For disposal see section 13. |
| Advice on safe handling | Work under hood. Do not inhale substance/mixture. |
| Advice on protection against fire and explosion | NA |
| Hygiene measures | Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance. For precautions see section 2.2. |
| Precautions for safe handling | Advice on safe handling Work under hood. Do not inhale substance/mixture. Hygiene measures Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance. For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | Storage conditions Tightly closed. Dry. Hygroscopic. |
| Storage conditions |
Tightly closed. Dry. Hygroscopic.
Hygroscopic.Tightly closed. Dry.
Hygroscopic.
|
| Storage conditions | Tightly closed. Dry. Hygroscopic. |
| Storage class | Storage class (TRGS 510): 13: Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Handling |
NA |
| Advice on general occupational hygiene | NA |
| Occupational Exposure limit values | No data available |
| Biological limit values | No data available |
| Exposure controls | Personal protective equipment |
| Engineering Control | NA |
| Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
government standards such as NIOSH (US) or EN 166(EU). Safety glassesUse equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU). Safety glasses
|
| Body Protection | protective clothing |
| Skin protection |
This recommendation applies only to the product stated in the safety data sheet,
supplied by us and for the designated use. When dissolving in or mixing with other
substances and under conditions deviating from those stated in EN374 please
contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell,
Internet: www.kcl.de). Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:KCL 741 Dermatril® L
|
| Respiratory protection | required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P3 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. |
| Other Protection Measure | NA |
| Control of environmental exposure | Do not let product enter drains. |
| Thermal hazards | No data available |
Gloves Suit
| Physical state | crystalline |
| Colour | colorless |
| Odour | odorless |
| Odor Threshold | Not Applicable |
| pH | 5,74 at 430 g/l at 22,5 °C |
| Melting Point | Melting point/range: 755 °C - lit. |
| Boiling Point | 1.390 °C at ca.1.013 hPa |
| Flash Point | No data available |
| Viscosity |
Viscosity, kinematic: 2550 mm2/s - OPPTS 830.7100
Viscosity, dynamic: No data available
|
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | The product is not flammable. - Flammability (solids) |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | > 750 °C |
| Vapour pressure | 1 hPa at 806 °C |
| Density | 3,2 g/cm3 at 25 °C |
| Vapour Density | 1 hPa at 806 °C |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | None |
| Solubility | 946 g/l at 25 °C - soluble |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |
| Oxidizing properties | none |
| Other safety information | No data available |
| Reactivity | No data available |
| Stability | The product is chemically stable under standard ambient conditions (room temperature) . |
| Possibility of hazardous reactions | Risk of explosion with: Alkali metals halogen-halogen compounds Generates dangerous gases or fumes in contact with: Strong acids Release of: hydrogen bromide |
| Conditions to avoid |
Avoid moisture. Heat.
no information available
|
| Incompatible materials | No data available |
| Hazardous Polymerization | In the event of fire: see section 5 |
| Acute toxicity | LD50 Oral - Rat - male and female - 4.200 mg/kg (OECD Test Guideline 401) Inhalation: No data available LD50 Dermal - Rabbit - male and female - > 2.000 mg/kg (OECD Test Guideline 402) |
| Skin corrosion/irritation | Skin - Rabbit Result: No skin irritation - 4 h (US-EPA) |
|
Serious eye damage/eye irritation Eyes - Rabbit
Result: slight irritation
(US-EPA)
|
Eyes - Rabbit Result: slight irritation (US-EPA) |
| Respiratory or skin sensitization | Maximization Test - Guinea pig Result: negative (OECD Test Guideline 406) |
| Serious eye damage/eye irritation | Eyes - Rabbit Result: slight irritation (US-EPA) |
| Rout Of Entry | NA |
| Toxicity to Animal | NA |
| Toxic Effects on Human | NA |
| Germ cell mutagenicity |
Test Type: Ames test Test system: Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative. Test Type: Mutagenicity (mammal cell test): chromosome aberration. Test system: Human lymphocytes Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 473 Result: negative Test Type: unscheduled DNA synthesis assay Test system: mammalian cells Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 482
Result: negative Test Type: Micronucleus test Species: Mouse Cell type: Bone marrow Application Route: Oral Method: OECD Test Guideline 474 Result: negative Remarks: The value is given in analogy to the following substances: ammonium bromide
|
| Reproductive toxicity | Suspected of damaging fertility or the unborn child. |
| Specific target organ toxicity - single exposure | May cause drowsiness or dizziness. |
| Specific target organ toxicity - repeated exposure |
May cause damage to organs through prolonged or repeated exposure.
- Central nervous system
|
| Special Remarks on other Toxi Effects on Humans: |
NA |
| Additional Information | Endocrine disrupting properties |
| Assessment |
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Repeated dose toxicity - Rat - male and female - Oral - NOAEL (No observed adverse effect level) - 100 mg/kg - LOAEL (Lowest observed adverse effect level) - 225 mg/kg Remarks: The value is given in analogy to the following substances: ammonium bromide RTECS: VZ3150000
Effects due to ingestion may include:, sedation To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated Systemic effects:Tiredness After uptake of large quantities: ataxia (impaired locomotor coordination) confusion Convulsions Coma However, when the product is handled appropriately, hazardous effects are unlikely to occur. Handle in accordance with good industrial hygiene and safety practice.
|
| Endocrine disrupting properties |
Product: Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Repeated dose toxicity - Rat - male and female - Oral - NOAEL (No observed adverse effect level) - 100 mg/kg - LOAEL (Lowest observed adverse effect level) - 225 mg/kg Remarks: The value is given in analogy to the following substances: ammonium bromide RTECS: VZ3150000 Effects due to ingestion may include:, sedation To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Systemic effects:Tiredness After uptake of large quantities:
ataxia (impaired locomotor coordination) confusion Convulsions Coma However, when the product is handled appropriately, hazardous effects are unlikely to occur.
Handle in accordance with good industrial hygiene and safety practice.
|
| Persistence and degradability | No data available |
| Toxicity |
Toxicity to fish semi-static test LC50 - Fish - > 440 mg/l - 96 h (OECD Test Guideline 203) Toxicity to daphnia and other aquatic invertebrates static test NOEC - Daphnia magna (Water flea) - >= 1.000 mg/l - 48 h (US-EPA)
Toxicity to algae ErC50 - Skeletonema costatum (marine diatom) - > 440 mg/l - 72 h (OECD Test Guideline 201) Toxicity to bacteria static test EC50 - activated sludge - > 1.000 mg/l - 3 h (OECD Test Guideline 209) Toxicity to
fish(Chronic toxicity) semi-static test NOEC - Poecilia reticulata (guppy) - 10 mg/l - 124 d Remarks: (ECHA) Toxicity to daphnia and other aquatic invertebrates(Chronic toxicity) semi-static test NOEC - Daphnia magna (Water flea) - 7,5 mg/l - 21 d Remarks: (ECHA)
|
| Bioaccumulative potential | Bioaccumulation - 7 d at 25 °C - 53,11 mg/l(sodium bromide) Bioconcentration factor (BCF): 0,23 |
| Toxicity to fish | semi-static test LC50 - Fish - > 440 mg/l - 96 h (OECD Test Guideline 203) |
| Toxicity to daphnia and other aquatic invertebrates | static test NOEC - Daphnia magna (Water flea) - >= 1.000 mg/l - 48 h (US-EPA) |
| Toxicity to algae |
ErC50 - Skeletonema costatum (marine diatom) - > 440 mg/l - 72 h
(OECD Test Guideline 201)
|
| Toxicity to bacteria | static test EC50 - activated sludge - > 1.000 mg/l - 3 h (OECD Test Guideline 209) |
| Eco Toxicity | Not Available |
|
Toxicity to
fish(Chronic toxicity)
|
semi-static test NOEC - Poecilia reticulata (guppy) - 10 mg/l - 124 d Remarks: (ECHA) |
|
Toxicity to daphnia
and other aquatic
invertebrates(Chronic
toxicity)
|
semi-static test NOEC - Daphnia magna (Water flea) - 7,5 mg/l - 21 d
Remarks: (ECHA)
|
| COD and BOD 5 | Not Available |
| Products Biodegradation: | NA |
| Mobility in soil | No Information available |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties |
Product: Assessment : The substance/mixture does not contain components
considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
|
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | No data available |
| Disposal methods | NA |
| Contaminated packaging | NA |
| Waste treatment Method |
See www.retrologistik.com for processes regarding the return of chemicals and
containers, or contact us there if you have further questions.
|
| UN number |
ADR/RID: - IMDG: - IATA: - |
| UN proper shipping name |
ADR/RID: Not dangerous goods IMDG: Not dangerous goods
IATA: Not dangerous goods
|
| Transport hazard class(es) |
ADR/RID: - IMDG: - IATA: - |
| Packaging group |
ADR/RID: - IMDG: - IATA: - |
| Environmental hazards |
ADR/RID: no IMDG Marine pollutant: no IATA: no |
| Special precautions for user | No data available |
| Further information | Not classified as dangerous in the meaning of transport regulations. |
| Transport in bulk according to IMOinstruments | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Safety, health and environmental regulations specific for the product in question | NA |
| National legislation | NA |
| DSCL (EEC) | NA |
| Other regulations | Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
PALLADIUM ACETATE RXSOL-60-6605-160
PALLADIUM HYDROXIDE 20% ON CHARCOAL RXSOL-60-6605-163
PALLADIUM NITRATE 44% PD content RXSOL-60-6605-164
PALLADIUM SPONGE 99.9% POWDER RXSOL-60-6605-165
PALLADIUM CALCIUM CARBONATE 10% pd RXSOL-60-6605-166
PARAFFIN WAX 58 60C BLOCK BRICKS RXSOL-60-6605-180
P DIMETHYL AMINO BENZALDEHYDE AR RXSOL-60-6605-192
P DIMETHYL AMINO CINNAMALDEHYDE AR RXSOL-60-6605-193
PEPTONE BACTERIOLOGICAL GRANULAR RXSOL-60-6605-197
PETROLEUM ETHER 100-2000 C FOR SYNTHESIS RXSOL-60-6605-205
PHENOL RED INDICATOR SOLUTION RXSOL-60-6605-215
PHENOLDISULPHONIC ACID SOLUTION 25% RXSOL-60-6605-216
PHENOLPHTHALEIN INDICATOR RXSOL-60-6605-218
PHENYL CHLOROFORMATE FOR SYNTHESIS RXSOL-60-6605-219
PHENYL HYDRAZINE AR RXSOL-60-6605-220
PHENYL HYDRAZINE FOR SYNTHESIS RXSOL-60-6605-221
PHENYL HYDRAZINE HYDROCHLORIDE AR RXSOL-60-6605-223
PHENYL MERCURY ACETATE FOR SYNTHESIS RXSOL-60-6605-224
PHENYL PHOSPHATE DISODIUM SALT AR RXSOL-60-6605-226
PHENYL TRIMETHYL AMMONIUM CHLORIDE RXSOL-60-6605-227
PHLOXIN B FOR MICROSCOPY RXSOL-60-6605-229
PHTHALAMIDE FOR SYNTHESIS RXSOL-60-6605-237
PHTHALIC ACID AR RXSOL-60-6605-238
PHTHALIC ACID FOR SYNTHESIS RXSOL-60-6605-239
PHTHALIC ANHYDRIDE FOR SYNTHESIS RXSOL-60-6605-249
PHTHALIDE FOR SYNTHESIS RXSOL-60-6605-250
PHTHALIMIDE FOR SYNTHESIS RXSOL-60-6605-251
PICRIC ACID SOLUTION AR 1.2% RXSOL-60-6605-256
PIPERAZINE Anhydrous 98% RXSOL-60-6605-257
PIPERAZINE Anhydrous 98% RXSOL-60-6605-257
PIPES BUFFER piperazine NN-Bis-2-Ethene Sulfonic acid RXSOL-60-6605-260
PLATINIUM OXIDE Pt 80% RXSOL-60-6605-261
POLYETHYLENE GLYCOL 600 RXSOL-60-6605-269
POLYVINYL PYRROLIDONE PVP RXSOL-60-6605-241
PONCEAU S FOR ELECTROPHORESIS RXSOL-60-6605-242
POPOP Scintillation Grade 1 4-bis5-phenyloxaza-2yl benzene RXSOL-60-6605-243
POPSO BUFFER FOR BIOCHEMISTRY RXSOL-60-6605-244
POTASSIUM ACETATE AR RXSOL-60-6605-245
POTASSIUM ACETATE LR RXSOL-60-6605-246
SODAMIDE RXSOL-60-6605-451
SODIUM ACETATE TRIHYDRATE AR RXSOL-60-6605-462
SODIUM ARSENITE SOLUTION AR 0.1N N10 RXSOL-60-6605-468
SODIUM BENZOATE AR RXSOL-60-6605-472
SODIUM BISELENITE Sodium Hydrogen Selenite RXSOL-60-6605-473
SODIUM BROMATE LR RXSOL-60-6605-481
SODIUM BROMIDE AR RXSOL-60-6605-482
SODIUM BROMIDE LR RXSOL-60-6605-483
SODIUM CHLORIDE SOLUTION0 85% wv RXSOL-60-6605-488
SODIUM CHROMATE TETRAHYDRATE LR RXSOL-60-6605-490
SODIUM DI CHLOROISOCYANURATE RXSOL-60-6605-495
SODIUM HYDROXIDE SOLUTION IN 1M N1 RXSOL-60-6605-519
SODIUM LAURYL SULPHATE AR 99% RXSOL-60-6605-529
SODIUM LAURYL SULPHATE POWDER LR RXSOL-60-6605-531
SODIUM META BORATE TETRAHYDRATE LR RXSOL-60-6605-534
SODIUM METHOXIDE AR RXSOL-60-6605-535
SODIUM METHOXIDE POWDER LR RXSOL-60-6605-536
SODIUM MOLYBDATE AR DIHYDRATE RXSOL-60-6605-537
SODIUM NITRITE AR RXSOL-60-6605-541
SODIUM NITRITE LR RXSOL-60-6605-542
SODIUM NITRO PRUSIDE AR RXSOL-60-6605-543
SODIUM NITRO PRUSIDE LR RXSOL-60-6605-544
SODIUM OXALATE AR RXSOL-60-6605-545
SODIUM PERBORATE TRIHYDRATE PURE RXSOL-60-6605-548
SODIUM PER CARBONATE GRANULAR RXSOL-60-6605-549
SODIUM PER CARBONATE TABLET RXSOL-60-6605-550
SODIUM PERSULPHATE AR RXSOL-60-6605-553
SODIUM PERSULPHATE LR RXSOL-60-6605-554
SODIUM PHOSPHATE DI BASIC DIHYDRATE RXSOL-60-6605-559
SODIUM PYRUVATE RXSOL-60-6605-562
SODIUM SALICYLATE AR RXSOL-60-6605-563
SODIUM SELENITE AR ANHYDROUS RXSOL-60-6605-566
SODIUM SELENITE LR ANHYDROUS RXSOL-60-6605-567
SODIUM SELENITE PENTAHYDRATE LR RXSOL-60-6605-568
SODIUM SILICATE POWDER META HYDRATED RXSOL-60-6605-569
SODIUM SILICATE SOLUTION RXSOL-60-6605-570
SODIUM SILICO FLUORIDE 99% RXSOL-60-6605-571
SODIUM STANNATE LR RXSOL-60-6605-572
SODIUM SULPHATE ANHYDROUS AR RXSOL-60-6605-573
SODIUM SULPHIDE FLAKES AR RXSOL-60-6605-576
SODIUM SULPHITE ANHYDROUS AR RXSOL-60-6605-577
Availability
SODIUM BROMIDE LR manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
SODIUM BROMIDE LR is available in small packing as well as in bulk. Buy premium quality SODIUM BROMIDE LR and other lab chemicals from one of the most trusted brands.
