Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Product Code: RXSOL-10-1102-210
STRUCTURE :-
RXSOL-10-1102-210 : Molecule have a long chain non polar
Hydrocarbon, whose structure can be Studied as follows:-
Head : It is water soluble & ‘-‘Vely charged.
Tail : It is oil soluble.
Cleansing Action Of RXSOL-10-1102-210 :-When RXSOL-10-1102-210 water is poured over the skin or dirty garments(Cloth ) the hydrocarbon Tail of the SYNDET molecules peg in to it, while the (–ve) HEAD is held in water.The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling and stirring. Each grease globule thus separated in PIN – CUSHIONED by hydrocarbon TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.
Characteristics:-( Why RXSOL-10-1102-210, is better than ordinary degreaser ?)
1) The “RXSOL-10-1102-210” are superior to general emulsifier or degreaser because they donot form insoluble salts Ca+²,Mg+², & Fe+³,ions as soaps do.
For e.g :- 2RCOO¯Na+ +Mgso4 Ù(RCOO)2 Mg+² + Na2So4 Soaps
Insoluble 2R So3¯Na+ + MgSo4 [ R So3¯]2Mg+² +Na2So4 RXSOL-10-1102-210 SOLUBLE Hence ORGANIC-SYNDETS ,can be used in either Soft Water or Hard Water, While ordinary soaps are precipitated in Hard Water and go waste.
2) RXSOL-10-1102-210, have a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule. Thus they have CLEANING POWER , as better than ORDINARY SOAP.
3) Ordinary Soaps were not readily BIODEGRADABLE, In other words, they were not broken down by BACTERIA in the SEWAGE TREATMENT PLANTS. They caused water POLLUTION while RXSOL-10-1102-210, are BIODEGRADABLE , so there is no question of water pollution.
The Importance of RXSOL-10-1102-210 by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply using RXSOL-10-1102-210 in correct dosa -ges. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1 : Spraying the RXSOL-10-1102-210 over the area to be cleaned.
Step 2 : Washing down the area using a high-pressure water jet After the RXSOL-10-1102-210 has been sprayed on the surface and before
The wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, theRXSOL-10-1102-210 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-10-1102-210 substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-10-1102-210 in correct dosages is half the job done. 3 Pieces of Good Advice Apply RXSOL-10-1102-210 on dry surface where possible A dry surface will absorb far better than a wet surface.When applying RXSOL-10-1102-210 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-10-1102-210 may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning:It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-10-1102-210 will give the best effect.
Product Code: RXSOL-16-1004-025
COAL TAR REMOVER is a solvent based cleaning emulsify liquid specialized to remove and clean bitumen, asphalt, carbonized coal tar, crude oil, Black Oil, benzene and many other petroleum based sludges.
Coal Tar Cleaner/Remover is chemicaly emulsifying cleaning agent which is effectively removaes coal tar, bitumen, crude petroleum benzine, Black oil etc. Also helps to emulsify bitumen asphalt to make emulsion.
Product Code: RXSOL-10-1743-025
Product Code: RXSOL-10-1742-025
Product Code: RXSOL-10-1736-025
AREAS OF USE: Auto, truck, machine shops, railroads, airplanes, farm equipment, shop floors, transmissions and marine equipment. This product works well in parts washer in shops of all kinds. Can be used on carpeting, fabric, ceramic tile, painted surfaces, wallpaper, cement, wood, metal, aluminum, plexiglass, most plastics and skin.
EFFECTIVELY REMOVES: Chewing gum, Oil, Crayon, Fresh paint, Blood, Waxes, Cosmetics, Tar, Grease, Asphalt, Duplicator Ink, Scuff marks, Adhesive Residue, and Multipurpose Adhesives.
Product Code: RXSOL-10-1733-025
HEAVY SOIL: Use compound diluted 1 part Solv-X-7 to 4 parts petroleum distillate. Spray on to surface and allow to soak 10-15 minutes. Flush off with water under pressure. Brushing helpfull if soil is very heavy. LIGHT SOIL: Use compound diluted up to 1 part with 10 parts kerosene. Spray on the surface, and allow to soak 10-15 minutes. Flush off with water under pressure.
CAUTION: HARMFUL OR FATAL IF SWALLOWED Contains petroleum distillates. If swallowed, do not induce vomiting. Call physician immediately. Avoid contact with eyes or skin. Combustible. Do not use or store near or open flame. Keep container closed when not in use. Rinse empty container before discarding. KEEP OUT OF REACH OF CHILDREN!
Product Code: RXSOL-10-1717-025
Directions:
Dilute concentrate with water for desired effective cleaning: IE: 1:15 (1 part concentrate to 15 parts water)
| Wax Stripping- | 1:15 | Pressure washer/Steam Cleaning- | 1:20 |
| Floor Cleaning- | 1:30 | Car and Truck wash- | 1:20 |
| Spot Remover- | 1:5 | Machinery and Equipment- | 1:10 |
| Aircraft Cleaning- | 1:5 | Carpet and Upholstery Cleaner- | 1:40 |
| Grease- | 1:5 | Hard water deposits | 1:5 |
| Oil film- | 1:5 | General Purpose cleaning- | 1:20-50 |
| For heavy duty degreasing before pressure washing - | 1:5-10 | ||
| For removal of rubber tire marks from concrete use undiluted with agitation. | |||
Apply with a sprayer, sponge, brush or steel wool. Agitate as required. Rinse thoroughly with water. Allow to air dry or wipe dry on smooth surfaces.
CAUTION:
Eye irritant. Contains sodium metasilicate. Avoid contact with eyes. If eye contact occurs, flush with water for 15 minutes. If irritation persists, consult a physician. Do not take internally. If swallowed, do not induce vomiting. Drink large volumes of clear water followed by a weak vinegar solution. If irritation persists, call a physician. KEEP OUT OF REACH OF CHILDREN.
Product Code: RXSOL-10-1731-025
A FAST ACTING SPECIALTY SOLVENT ENGINEERED FOR UTILITY USE
· RXSOL-10-1731 contains hydrocarbons. If ingested, do not induce vomiting.
· RXSOL-10-1731 fumes are non toxic, non narcotic and have a fresh citrus odor. Use in areas having at least normal room ventilation.
· RXSOL-10-1731 is minimally irritating if splashed into eyes, Wash, eyes with water for 15 minutes.
· RXSOL-10-1731 is combustible under specific conditions not encountered during normal use. Keep away from open flames and ignition sources. Use recommended cleaning procedures.
Product Code: RXSOL-10-1729-025
Land Fill Areas: Dilute 4 parts RXSOL-10-1729 with 100 parts water for treating land fill areas. Apply by spray at the rate of 50 gallons to each 1,000 square feet to adequately cover obnoxious odors.
Refuse Trucks and Containers: Use as is and spray on containers or trucks to remove heavy grease & fatty deposits. Pleasant fragrance masks odors while cleans and degreases.
Grease Traps and Sumps:For controlling sour odors from grease traps and sumps pour directly in grease trap and let the emulsifying action dissolve the grease and sludge and control odors. Use 1 pint RXSOL-10-1729 per grease trap every 2 weeks for preventive maintenance.
Other Purposes: Mix 1 part RXSOL-10-1729 with 4 to 25 parts for Spray application, depending on the severity of odors and grease to be controlled.
Product Code: RXSOL-10-1725-025
Multiple Solvent Action goes to work Immediately
Unsurpassed for deep penetration
Powerful emulsifying action floats away deposits
Reduces Chipping and Scraping
Free rinsing
Easy to Use
Reduces Maintenance time
Will Not harm most painted surfaces
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
