Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
STRUCTURE :-
RXSOL-10-1102-210 : Molecule have a long chain non polar
Hydrocarbon, whose structure can be Studied as follows:-
Head : It is water soluble & ‘-‘Vely charged.
Tail : It is oil soluble.
Cleansing Action Of RXSOL-10-1102-210 :-When RXSOL-10-1102-210 water is poured over the skin or dirty garments(Cloth ) the hydrocarbon Tail of the SYNDET molecules peg in to it, while the (–ve) HEAD is held in water.The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling and stirring. Each grease globule thus separated in PIN – CUSHIONED by hydrocarbon TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.
Characteristics:-( Why RXSOL-10-1102-210, is better than ordinary degreaser ?)
1) The “RXSOL-10-1102-210” are superior to general emulsifier or degreaser because they donot form insoluble salts Ca+²,Mg+², & Fe+³,ions as soaps do.
For e.g :- 2RCOO¯Na+ +Mgso4 Ù(RCOO)2 Mg+² + Na2So4 Soaps
Insoluble 2R So3¯Na+ + MgSo4 [ R So3¯]2Mg+² +Na2So4 RXSOL-10-1102-210 SOLUBLE Hence ORGANIC-SYNDETS ,can be used in either Soft Water or Hard Water, While ordinary soaps are precipitated in Hard Water and go waste.
2) RXSOL-10-1102-210, have a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule. Thus they have CLEANING POWER , as better than ORDINARY SOAP.
3) Ordinary Soaps were not readily BIODEGRADABLE, In other words, they were not broken down by BACTERIA in the SEWAGE TREATMENT PLANTS. They caused water POLLUTION while RXSOL-10-1102-210, are BIODEGRADABLE , so there is no question of water pollution.
The Importance of RXSOL-10-1102-210 by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply using RXSOL-10-1102-210 in correct dosa -ges. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1 : Spraying the RXSOL-10-1102-210 over the area to be cleaned.
Step 2 : Washing down the area using a high-pressure water jet After the RXSOL-10-1102-210 has been sprayed on the surface and before
The wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, theRXSOL-10-1102-210 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-10-1102-210 substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-10-1102-210 in correct dosages is half the job done. 3 Pieces of Good Advice Apply RXSOL-10-1102-210 on dry surface where possible A dry surface will absorb far better than a wet surface.When applying RXSOL-10-1102-210 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-10-1102-210 may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning:It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-10-1102-210 will give the best effect.
Dangerous goods class : 3
Physical state : Liquid
Odor : No fragrance added
Color : Clear
pH concentrate : N/A
Net weight : 8.3 lb/gal
Specific Gravity : 1.035
Molecular Weight : N/A
Solubility in water : Complete
Rinsibility : Excellent
Surfactants : None
Abrasives : None
Flash point : >139ºF. ASTM D93 closed cup
Boiling Point : 309°F
Vapor Pressure @ 68°F : 1.7mm Hg
Evaporation Rate : 0.22
Volatile by volume : 100%
Toxicity : N/A
Biodegradable : Yes, begins at 5 days in water
Kauri-Butanol Value : >1000
For heavy duty cleaning, degreasing and rubber tire mark removal on concrete, dilute RXSOL-10-1726 concentrate 1 to 9 with water until a uniform emulsion is formed. Let stand 2 minutes. Scrub thoroughly and rinse with water. For drain cleaning, use RXSOL-10-1726 straight and pour directly into drain - let stand for 2 hours and flush with hot water.
CAUTION: If swallowed, do not induce vomiting. Call physician immediately. Avoid contact with eyes or skin. Combustible. Do not use or store near or open flame. Keep container closed when not in use.
Color……………………….Clear
Odor………………………..Petroleum Blend
Dilution……………………...Ready to Use
Flash point…………………...> 140 Degrees F.
| Physical Status | Transparent liquid |
| Boiling Point | 100 °C |
| Freezing Point | 0°C |
| Viscosity (25°C) | S/O |
| Density | 1.15g/cc |
| Vapor Pressure | N/D |
| Solubility in water | Complete |
| Vapor Density | N/D |
Keep away from hazardous materilas.
CAUTION: CORROSIVE, CONTAINS POTASSIUM HYDROXIDE. AVOID CONTACT WITH EYES, SKIN, AND CLOTHING. DO NOT TAKE INTERNALLY. ANTIDOTES: EYES: FLUSH WITH CLEAR WATER THOROUGHLY, THEN BATHE EYES WITH BORIC ACID SOLUTION. GET PROMPT MEDICAL ATTENTION. EXTERNAL: FLUSH WITH CLEAR WATER THOROUGHLY, THEN RINSE WITH VINEGAR. INTERNAL: DRINK AS MUCH LEMON OR ORANGE JUICE AS POSSIBLE, THEN FOLLOW WITH VEGETABLE OIL. GET PROMPT MEDICAL ATTENTION. KEEP OUT OF REACH OF CHILDREN.
This product contains no phosphates and has a controlled pH of less than 13.
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
