Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
|
|
Properties |
|
Molecular formula |
HCl in water (H2O) |
Molar mass |
36.46 g/mol (HCl) |
Appearance |
Clear colorless to light-yellow liquid |
Melting point |
−26°C (247 K) 38% solution |
Boiling point |
110 °C (383 K), 20.2% solution; |
Solubility in water |
Miscible |
Acidity (pKa) |
−8.0 |
Viscosity |
1.9 mPa s at 25° C, |
Flash point |
Non-flammable |
Safety
Hydrochloric acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with hydrochloric acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.
Typical Properties :
Appearance | Liquid clear |
Type | Maleic Multipolymer |
Odour | Odourless or Mild odor |
Molecular weight¹ |
2000 |
pH | 6.5 - 7.50 |
% Total solids | 50 |
% Actives | 60-90 |
Viscosity, as is, mPa.s/cps² | 400-1200 |
The RXSOL Chemical Department provides Ferric Sulfate in a specialty liquid blend and standard granular form. And products dilute with water to reach desired concentrations prior to chemical treatment. Both products lower pH and/or flocculate contaminants in wastewater to aid in co-precipitation and removal of solids and metals.
Handling :
The handling of any chemical requires care. Anyone responsible for using or handling Ferric Sulfate should familiarize themselves with the full safety precautions outlined in our Material Safety Data Sheet.
Storage
Storage tanks and piping should be constructed of suitable material such as stainless steel, fiberglass, or cross-linked polyethylene. With this chemical it is recommended to clean the storage tank every 1-2 years.
Characteristics | Unit | Specifications | Test Method |
Peracetic acid | %w/w | 40 min | TPL QCWK-6002 |
H2O2 | %w/w | 6-8 | TPL QCWK-6001 |
Active Oxygen | %w/w | 8 min | TPL QCWK-6003 |
Acetic acid | %w/w | 32min | TPL QCWK-6004 |
pH of 1% solution | - | 3.0 max | TPL QCWK-1002 |
Sp.Gravity @25 + 1๐ C | - | 1.10 min | TPL QCWK-1009 |
Color | H.U | 15 max | TPL QCWK-1008 |
Appearance | - | Clear | TPL QCWK-1008 |
Oxidizing agent, causes severe burns. May cause fire. Harmful by Inhalation, in contact with skin and if swallowed.
Specifications of Disodium EDTA
Product Name : Disodium EDTA.
Product Category : Ethylene Diamine Tetra Acetic Acid Derivatives.
CAS No. : 139-33-3 (Anhydrous); 6381-92-6 (Dihydrate).
HSN No. : 29173990.
Synonyms : Ethylenediaminetetraacetic Acid Disodium Salt, N,N'-1,2-ethanediylbis(N-(carboxymethyl)glycine) edetic acid Disodium Salt, Disodium Edetate, Metaclaw, Trilon B, Versene 220, Dissolvine, Titriplex, etc.
Molecular Formula : C10H14O8N2Na2.2H2O.
Molecular Weight : 372.2.
Appearance : White Crystalline Powder.
Solubility : Soluble In Water, Clear Solution.
Assay : 99.0% Min.
pH : 4.0 - 6.0.
Chelation Value as mg. of CaCO3 : 270.0.
Uses / Application of Disodium EDTA
Disodium EDTA is a Sequestering Agent, which is used in various Industries such as Pharmaceutical, Photography, Textile, Boiler Turbine scale removal, Agriculture. It is used for removing unwanted inorganic impurities present in the system, which helps in getting superior performance & cost saving.
Product Property :
Form | Liquid |
Colour | Amber |
Odour | Non |
Specific Gravity | 1.10 - 1.15 |
Flash Point | None |
Freezing Point | < – 4oC |
pH | 4.5 - 7.00 |
Solubility in Water | Complete Soluble |
Appearance | Clear Liquid |
Color | Light Yellow to amber liquid |
pH | 2.0 - 5.0 |
Specific Gravity | 1.20 - 1.30 |
Odour | Slight |
Boiling Point | 70 °C |
Flash Point | 182 °C |