Mold Release Agent
- Part number
- RXSOL-90-8150-025
- Category
- Asphalt Release / Products
- Brand
- RXSOL
Overview
Mold Release Agent a high-performance non-ionic silicone emulsion specifically designed for use as a mold release agent in cast polyurethane (PU) elastomer applications. It provides excellent release properties, surface finish, and mold protection without interfering with curing or post-processing operations.
The non-ionic nature ensures broad compatibility with PU systems, pigments, fillers, and additives, while minimizing surface defects, buildup, and transfer.
Technical specifications
| Property | Value |
|---|---|
| Appearance | Milky white liquid |
| Odor | Mild / characteristic |
| pH (as supplied) | 6.0 – 8.0 |
| Density @ 25 °C | 0.97 – 1.02 g/cm³ |
| Solubility | Dispersible in water |
| Flash Point | Not applicable (water-based) |
| Freezing Point | ~0 °C |
Applications
- Cast polyurethane elastomers
- PU rollers, wheels, bushings
- Industrial PU parts
- Metal molds
- Epoxy molds
- Silicone and composite molds (after compatibility check)
Dosage and directions
How to use RXSOL Mold Release Agent
- Clean mold thoroughly before first use
- Dilute product with clean water as recommended
- Apply by: Spray or Brush
- Wipe with lint-free cloth
- Allow to dry completely before casting
- Reapply as required based on cycle count
- Polyester-based PU systems
- Polyether-based PU systems
- Filled and unfilled formulations
- Not recommended to mix directly into PU resin
- Compatibility testing advised before large-scale use
Dilute the product using water with a hardness not exceeding 250 ppm (expressed as CaCO₃), adjusting the dilution level according to the intended application technique, such as spray or pad application. The molds should be completely clean before treatment. Typically, one treatment with Mold Release Agent will remain effective for two to ten molding cycles, depending on the design complexity of the mold and the type of material being molded.
Characteristics and notes
Key Features of RXSOL Mold Release Agent Emulsion
- Excellent mold release performance for PU elastomers
- Non-ionic – compatible with most polyurethane systems
- Produces smooth, defect-free surfaces
- Reduces mold fouling and buildup
- Improves mold life and productivity
- Water-based, low VOC, non-flammable
- Does not interfere with painting, bonding, or post-finishing when properly used
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Mold Release Agent |
| Product Type | RXSOL-90-8150-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai, Chennai, Vizag, Kolkata, UAE, OMAN, Nairobi
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Silicone Derivative | ------ |
Formulatory |
W/W | None Established |
| PETROLEUM mixture | 8008-20-6 | Formulatory | w/w |
Generally non hazardous in normal handling, however good laboratory practices should always be used.Avoid long term exposure to skin or by inhalation.
Generally not hazardous in normal handling, however good laboratory practices should always be used. Avoid long term exposure to skin or by inhalation.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek medical attention |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. If symptoms persist, seek medical aid |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention.If large amounts are swallowed give water to drink and seek medical aid. |
|
Fire Extinguisher Type: |
for large fires use carbon dioxide, dry chemical powder or water spray. On small fires use carbon dioxide, drychemical or water spray. |
| Fire / Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Absorb spill with inert material. Dilute excess with water and flush down drain.
Store in a cool dry place. This material is not considered hazardous. Use normal safe laboratory
|
Respiratory Protection |
No special protection required |
|
Ventilation |
Local |
| OTHER |
Mechanical |
| Protective Gloves | Gloves to prevent exposure |
| EYE PROTECTION | Splash Goggles -satety glasses as a minimum. |
| Other Protective Equipment | Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | 312°F |
| VAPOR PRESSURE | Not available |
| MELTING POINT | 30°F |
| VAPOR DENSITY | Not available |
| EVAPORATION RATE | <1 |
| Appearance /Odors | White, Liquid/SlightOder |
| Flash Point | >214°F(>101.1° C)(Closed cup |
| Specific Gravity | 1.0 |
| Percent Volatile by | 0 |
| Evaporation Standard | Butylacetate =1 |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air |
Not applicable |
| Upper Flamm. Limit in Air |
Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Oxidizing material can cause a reaction |
|
MATERIALS TO AVOID |
None known |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Carbon dioxide, carbon monoxide,formaldehyde |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
handling practices. Acute toxicity Oral LD50 estimated to be greater than 5000 mg/kg
Chronic toxicity:None known
Specific effects
Carcinogenic effects:None known
Mutagenic effects:None known
Reproductive toxicity:None known
Target organ effects None known
Environmental Information:No data available
Waste from residues / unused products:Dispose of according to all federal, state and local applicable regulations
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
International Inventories
All components of this product are listed on the following inventor ies: U.S.A. (TSCA), Canada (DSL/NDSL), Australia (AICS), Phlippines (PICCS),China (IECSC).U.S. Regulations California Proposition 65:This product is not subject to the reporting requirements under California's Proposition 65 STATE RIGHT TO KNOW
Ingredient(s)Water 7732-18-5 CERCLA/ SARA None Canada WHMIS hazard class:Non-controlled
Flammability Health Reactivity
|
Revisions |
NFPA |
| 7/30/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
| 3/25/2013 | 0.2 Revise all sections to indicate Non-hazardous mixture. LS |
| 3/4/2009 | 0 Creation date LS |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Mold Release Agent Manufacturer supplier in India UAE Oman NAirobi Sudan, Mumbai, Kandla, Kolkata, Chennai, Vizag, Surat, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, Gulf, Sohar, Muscat Barka, Oman, Nairobi Kenya, Africa, Sudan, Yemen
